• 한국수자원학회논문집
• /
• 제31권6호
• /
• pp.667-674
• /
• 1998

NAPL로 오염된 토양이나 지하수에 스팀을 주입하여 제거하는 과정을 모의하는 수치모형은 다양한 현장상황에서의 적절한 작업조건을 설계·평가하는데 매우 유용한 도구가 될 수 있다. 스팀주입에 의한 NAPL 제거과정을 다상, 다요소 시스템의 비등온 과정으로 기술하는 지배방정식에 기초한 T2VOC를 이용하여 1 및2차원상황에 대하여 수치해석을 수행하였다. 1차원의 경우 수치해는 실험상 어려움으로 인한 편차를 제외하고는 실험에서 얻은 컬럼내 온도분포와 비교적 좋은 일치를 보였다. LNAPL인 xylene과 DNAPL 인 TCE에 대한 2차원 해석도 상이한 물성에 상응하는 분포와 제거과정을 합리적으로 예측하는 것이 가능함을 보여주었다. 수치모형의 활용범위는 실험적으로 확인하기 여려운 기화에 의한 가스의 생성과 같은 복잡한 과정의 구명을 비롯하여 스팀주입기술의 현장적용시 매우 넓을 것으로 판단된다.

• 설비공학논문집
• /
• 제13권3호
• /
• pp.167-173
• /
• 2001

This paper represents the numerical analysis for microenvironments various temperature and humidity in bed mattress. He purpose of this study is for healthful bed mattress by controling a bacteria with a prediction of the vapor and temperature distributions in the bed mattress. The numerical model is one dimensional unsteady state and the governing equations were discretized by fully implicit scheme. The numerical results were compared with experimental data, and showed a good agreement with them. Specially, the excess-relative humidity shows a lower distribution near the surface of mattress, meaning that the optimum living condition for bacteria will be caused.

• 한국대기환경학회지
• /
• 제12권5호
• /
• pp.577-585
• /
• 1996

A screening study was performed in order to resolve the flow, combustion and emission characteristics of the gas furmace with co-axial diffusion flane burner. A control-valume based finite-difference method with the power-law scheme was employed for discretization. Numerical procedure for the differential equation was used by SIMPLEST to enclosute rapid converge. A k-.varepsilon. model was incorporated for the closure of turbulence. The mass fraction and mixture fraction were calculated by cinserved scalar method. An equilibrium analysis was employed to determine the concentration of radicals in the product stream and conserbation equations were them solved for N amd NO by Zelovich reaction scheme. The method was exercised in a simple one-dimensional case first, to determine the effects of air ratio, temperature and residence time on NO formation and applied to a furnace with co-axial diffusion flame burner.

• 한국전산유체공학회지
• /
• 제11권2호
• /
• pp.40-48
• /
• 2006

In the present, The theoretical and numerical results of gas flow characteristics inside a swirl injector are presented. For this purpose a one-dimensional (theoretical) model and 2D/3D CFD models are proposed for use in the design of the injector. It was found that contradictory to the classical theory about the compressible flow, the swirl has a significant effect on the mass flow rate and the choking conditions. It was found that the one-dimensional model provides reasonably accurate results compared with the 2D/3D numerical results, and thus can be used at the initial stage of the swirl-injector design process.

• 한국콘텐츠학회논문지
• /
• 제13권3호
• /
• pp.428-434
• /
• 2013

빈발하고 있는 대규모 홍수와 자연재해는 정확도가 높은 하천 흐름 수치해석 모델에 대한 관심의 증대로 이어지고 있다. 현재 하천에서 발생하는 일반적인 흐름은 기존에 개발된 여러 형태의 천수방정식을 지배방정식으로 하는 수치기법에 의해 해석되고 있으나, 연속적이지 않은 형태의 흐름을 해석하거나 매우 정확한 해석을 필요로 하는 경우에는 기존의 수치해석기법은 많은 한계를 보여 주고 있다. 본 연구에서는 불연속 갤러킨 기법 기반의 흐름 모델을 개발하고, 이를 이용하여 전통적으로 1차원 천이류로 분류되는, 댐 붕괴파, 둔덕위 흐름 모의에 적용하여 기존의 수치해와 대체로 잘 일치함을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.641-654
• /
• 2014

A new computer code, named CORONA (Core Reliable Optimization and thermo-fluid Network Analysis), was developed for the core thermo-fluid analysis of a prismatic gas cooled reactor. The CORONA code is targeted for whole-core thermo-fluid analysis of a prismatic gas cooled reactor, with fast computation and reasonable accuracy. In order to achieve this target, the development of CORONA focused on (1) an efficient numerical method, (2) efficient grid generation, and (3) parallel computation. The key idea for the efficient numerical method of CORONA is to solve a three-dimensional solid heat conduction equation combined with one-dimensional fluid flow network equations. The typical difficulties in generating computational grids for a whole core analysis were overcome by using a basic unit cell concept. A fast calculation was finally achieved by a block-wise parallel computation method. The objective of the present paper is to summarize the motivation and strategy, numerical approaches, verification and validation, parallel computation, and perspective of the CORONA code.

• Earthquakes and Structures
• /
• 제2권1호
• /
• pp.43-64
• /
• 2011

One-dimensional rod theory is very effective as a simplified analytical approach to large scale or complicated structures such as high-rise buildings, in preliminary design stages. It replaces an original structure by a one-dimensional rod which has an equivalent stiffness in terms of global properties. The mechanical behavior of structures composed of distinct constituents of different stiffness such as coupled walls with opening is significantly governed by the local variation of stiffness. Furthermore, in structures with setback the distribution of the longitudinal stress behaves remarkable nonlinear behavior in the transverse-wise. So, the author proposed the two-dimensional rod theory as an extended version of the rod theory which accounts for the two-dimensional local variation of structural stiffness; viz, variation in the transverse direction as well as longitudinal stiffness distribution. This paper proposes how to deal with the two-dimensional rod theory for structures with setback. Validity of the proposed theory is confirmed by comparison with numerical results of computational tools in the cases of static, free vibration and forced vibration problems for various structures. The transverse-wise nonlinear distribution of the longitudinal stress due to the existence of setback is clarified to originate from the long distance from setback.

• 소성∙가공
• /
• 제24권4호
• /
• pp.280-286
• /
• 2015

Hemming is used to connect two sheet metal components by folding the edge of an outer panel around an inner panel to create a smooth edge. The minimization of hemming defects is critical to the final quality of automobile products because hemming is one of the last operations during fabrication. Designing the hemmed part is not easy and is influenced by the geometry of the bent part. Therefore, the main problem for automotive parts is dimensional accuracy since formed products often deviate geometrically due to large springback. Few numerical approaches using 3-dimensional finite element model have been applied to hemming due to the small element size which is needed to properly capture the bending behavior of the sheet around small die corner and the comparatively big size of automotive opening parts, such as doors, hoods and deck lids. The current study concentrates on the 3-dimensional numerical simulation of hemming for an automotive door. The relationship between the design parameters of the hemming operation and the height difference defect is shown. Quality improvement of the automotive door can be increased through the study of model parameters.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.566-576
• /
• 1995

A Computational code has been developed in order to design axial fans by the numerical optimization techniques incorporated with flow analysis code solving three-dimensional Navier-Stokes equation. The steepest descent method and the conjugate gradient method are used to look for the search direction in the design space, and the golden section method is used for one-dimensional search. To solve the constrained optimization problem, sequential unconstrained minimization technique, SUMT, is used with imposed quadratic extended interior penalty functions. In the optimization of two-dimensional cascade design, the ratio of drag coefficient to lift coefficient is minimized by the design variables such as maximum thickness, maximum ordinate of camber and chord wise position of maximum ordinate. In the application of this numerical optimization technique to the design of an axial fan, the efficiency is maximized by the design variables related to the sweep angle distributed by quadratic function along the hub to tip of fan.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.221-226
• /
• 1999

Three-dimensional flow analysis and numerical optimization methods are presented for the design of an axial-flow fan. Steady, Incompressible, three-dimensional Reynolds-averaged Wavier-Stokes equations are used as governing equations, and standard k-$\epsilon$ turbulence model is chosen as a turbulence model. Governing equations are discretized using finite volume method. Steepest descent method, conjugate gradient method and BFGS method are compared to determine the searching directions. Golden section method and quadratic fit-sectioning method are tested for one dimensional search. Objective function is defined as a ratio of generation rate of the turbulent kinetic energy to pressure head. Sweep angle distributions are used as design variables.