• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1-6
• /
• 2007

A train is subject to a series of reliability-related tasks through its entire life cycle. Among them the reliability demonstration is required for commercial trains and the test is performed during the commissioning period or the early stage of the commercial operation. On the other hands various test are carried out for prototype trains and hence their operational condition is quit different from that of the commercial trains. One should take account of these differences when reliability assessment is needed for the prototype trains. This paper presents a procedure and an analysis method to evaluate reliability of a prototype train. Reliability data have been obtained through test runs of the HSR-350x and operational conditions for the KTX and HSR-350x have been analyzed to compare the reliability targets of the prototype train.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.45-51
• /
• 2002

The existing methods to split overall gear ratio of the cylindrical multi-stage gear train have their own limitations to be used in practical design and are also problematic to be implemented in a formalized algerian. This paper proposes two types of new methods to find gear ratios best approximating the overall gear ratio. The proposed methods are quite general to be applied to the gear train having any number of stages, and offer a considerably good result in a very short time. The first method uses the random search method and the second one is based on the simulated annealing algorithm. The proposed algorithms are expected to be very useful not only as an independent program to split overall gear ratio, but also as a desist sub-module for the integrated desist system of multi-stage gear drives.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.210-215
• /
• 2003

At present, communication network for subway is making use of the train radio system for main network and normally established a base station every three subway station. It is talk over the telephone between a locomotive and the traffic control for careful train service. Besides, mobile telephone equipment is using for service improve and convenience to passengers such as 011, 016, 017, 019 and what not. However, the train radio system has been occurring a various problems when a state of emergency because it is able to compose only one communication route each base station zone. We could have improving like this problems through induce the TRS(Trunked Radio System), though because have been able to compose multilateral communication route in case of linking with LCX(Leaked Coaxial) cable which is established. Therefore, we could be able to a fitting meet the emergency as train firing etc.. and efficient use of limited frequency resources.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.645-651
• /
• 2000

In this paper, numerically evaluated is the regulations for crashworthy design of the Korean standard urban train suggested by KRRI. The 4-car consist of K-EMU(Korean Electric Multiple Unit) train developed in recent is analyzed under various collision conditions such as normal coupling, heavy shunt, light and heavy collisions. The collision conditions are assumed as K-EMU collides against another stationary one at 5 kph, 10 kph, 25 kph and 32 kph. According to the numerical results and bibliographical study, it is necessary that the regulations by KRRI be complemented from crashworthy point of view. Furthermore, the K-EMU train is recommended to adopt a new coupler with an additional energy absorber or a mechanical fuse.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.124-133
• /
• 1993

Porper ergonomic design of a passenger seat for the highspeed train is one of the essential design components that is directly related to passenger comfort. This study investigated a systematic approach to ergonomic passenger seat design and evaluation for the Korean highspeed train. To design an ergonomic passenger seat that improves passenger comfort, seat dimensions, Korean anthropometry, passenger activities in the coach, body postures and body contours were considered. The interrelationship of these factors was analyzed and seat dimensions were suggested. To properly evaluate the dimensions suggested, four prototypes were made and iteratively evaluated as a feedback procedure. This approach is expected to be applicable to the passenger seat design of other transport vehicles as well as a train.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.262-267
• /
• 2006

The maximum speed of the conventional railway rolling-stock which is restrained to 150km/h will be increased to 200km/h with the development of korean tilting train. The improvement of quality for railway wheel which is closely connected with the safety of train is needed. On the one hand, the speed limit of the wheel standard for the conventional rolling-stock is 150km/h. Thus, a study on the safety of wheel structure, test items and criteria is needed to apply this standard to tilting train wheel. This study is started to present the improvement scheme and to extend the speed limit for conventional wheel standard. For this, we studied the safety of wheel structure, wheel material tests and the criteria for wheel standard and show the results

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.367-370
• /
• 2005

Electric train is currently used widely, and much development is expected. But, in case of electric train, as comparison with diesel rolling stock, many electrical problem such as harmonic, voltage sag, EMI, EMC usually occur. Accordingly, in order to popularize an electric train, first, a study on electrical problem at an electric train must be accomplished. In this paper, one of electrical problems, arc characteristics according to loss of contact between pantograph and catenary was analyzed.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.992-1002
• /
• 2012

In this paper, the series chopper based power train for electric vehicle is proposed for aiming the increase of one battery charge driving distance. Both the motor test bench based experiments and the chassis dynamo based experiments are tested and then analyzed for EV driving performance that the proposed power train with SAZZ chopper and Quasi-PAM control scheme is compared with or without the series chopper. It is confirmed through two kinds of experimental analyses that the series chopper power train for EV can be useful to extend the driving distance if the high efficiency and the low weight of chopper are satisfied.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.476-488
• /
• 1998

The study was carried out about the development of the propulsion and the control systems toy Korean High Speed Train. The propulsion system was studied to run the maximum operating speed of 350km/h. The capacity of the main equipments is decided for the train to run the maximum operating speed of 350km/h with one Ike of 2 power cars, 4 motorized trailers and 14 intermediate trailers. The control system was studied to two parts the supply and the control of high and low voltages used at train. The performance study of control system would be continued for interface with other systems.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.146-154
• /
• 1999

The test facility of the 1/60-scale models for the train-tunnel interactions was recently developed to investigate the effects of entry portal shapes, flood shapes and air-shafts for reducing the micro-pressure waves radiating to the surroundings of the tunnel exits by KRRI in Korea. The launching system of train model was chosen as air-gun type. In present test rig, after train model is launched, the blast wave by the driver did not enter to inside of the tunnel model. The train model is guided on the one-wire system from air-gun driver to the brake parts of test facility end. Some cases of the experiments were compared with numerical simulations to prove the test facility.