• Korean Journal of Social Welfare
• /
• v.56 no.1
• /
• pp.155-179
• /
• 2004

This study is about the effectiveness and activation strategies of vacational training programme for the disabled guided by the Ministry of Labour and the Korea Employment Promotion Agency for the Disabled(KEPAD). This research employed quantitative approach. The quantitative research used the samples of 853 disabled people who had finished vocational training programme during recent 3 years. In this research the effectiveness is categorized into two ; product effectiveness and employment effectiveness. Product effectiveness is influenced by the kind of train-center, train-area, train-length. The KEPAD, non-IT job area and train-period over 6 month are more effective. Employment effectiveness is significantly influenced by demo-sociological factor rather than disability factor. Especially the kind of train-center is very important to be employed for the disabled. This implicates that choice of train-center by the disabled and effective management of it by the public sector is very important in developing employment. Effective management, stated above, includes reengineering programmes and functions accountable to the need form the trainee, bridging the gap among train-centers in terms of performance, differentiation of financial support according to the product to save the public fund, encouraging one special programme in one train-center.

• Structural Engineering and Mechanics
• /
• v.65 no.6
• /
• pp.741-750
• /
• 2018

The aim of this study was to investigate the mechanical responses of a high-speed railway shield tunnel subjected to impact by a derailed train, with emphasis on the protective effect of the secondary lining. To do so, the extended finite element method was used to develop two numerical models of a shield tunnel including joints and joint bolts, one with a cast-in-situ concrete secondary lining and one without such a lining. The dynamic responses of these models upon impact were analyzed, with particular focus on the distribution and propagation of cracks in the lining structures and the mechanical responses of the joint bolts. The numerical results showed that placing a secondary lining significantly constricted the development of cracking in the segmental lining upon the impact load caused by a derailed train, reduced the internal forces on the joint bolts, and enhanced the safety of the segmental lining structure. The outcomes of this study can provide a numerical reference for optimizing the design of shield tunnels under accidental impact loading conditions.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.9-16
• /
• 2001

The lifetime of power train components can be improved dramatically by finding crack initiation points with suitable software tools and optimization of the critical areas. With increasing capacities of computers the prediction of the lifetime for components by numerical methods gets more and more important. This paper discusses some applications of the outstanding fatigue simulation program FEMFAT supporting the assessment of uniaxially and multiaxially loaded components (as well as welding seams and spot joints). The theory applied in FEMFAT differs in some aspects from classical approaches like the nominal stress concept or the local one and can be characterized by the term "influence parameter method". The specimen S/N-curve is locally modified by different influence parameters as stress-gradient to take into account notch effects, mean-stress influence which is quantified by means of a Haigh-diagram, surface roughness and treatments, temperature, technological size, etc. It is possible to consider plastic deformations resulting in mean-stress rearrangements. The dynamic loading of power train components is very often multiaxial, e.g. the stress state at each time is not proportional to one single stress state. Hence, the directions of the principal axes vary with time. We will present the way how such complex load situations can be handled with FEMFAT by the examples of a crank case and a gear box.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.19-29
• /
• 2014

Korean societal concern for the train accidents is fast and widely increasing with an ever-increasing demand and use for KTX. Most of these train accidents are inclined to be caused by human error. Experts used to attribute the causes of human error to the defects in various aspects such as technology, organizational system, practices, corporate culture, and/or human resource itself. Among the diverse causes of human error, an important one, even though it was rarely focused, may be the issue of impact of rule or procedure change on human error. Giving attention to the implicit importance of this issue, this study intends to highlight the theme of frequent procedure change in railway driving manual as a critical factor of human error. To attain this purpose mentioned above, dual methodologies were adopted. One is to qualitatively analyze the real cases of procedure change in relevant manuals followed by the incident case(passing the station scheduled to stop) happened lately. Another is to quantitatively perform statistical analysis based on questionnaires received from 224 train drivers. Results show that frequent changes in internal affairs procedure is or may be an important factor causing stress and human error from train drivers.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.582-596
• /
• 2019

Considering that the existing Long Term Evolution is not suitable for the fast and frequent handovers of high-speed trains, this paper proposes a relay-assisted handover mechanism to solve the problems of long handover authentication time and vulnerable to security attacks. It can achieve mutual authentication for train-ground wireless communication, and data transmission is consistent with one-time pad at the same time. The security analysis, efficiency analysis and simulation results show that the proposed mechanism not only realizes the forward security and resists many common attacks, but also effectively reduces the computational overhead of train antenna during the secure handover process. When the running speed of a train is lower than 500km/h, the handover delay is generally lower than 50ms and the handover outage probability is less than 1.8%. When the running speed of a train is 350km/h, the throughput is higher than 16.4mbps in the process of handover. Therefore, the secure handover mechanism can improve the handover performance of high-speed trains.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.889-896
• /
• 2004

A series of filed tests have been performed to investigate the aerodynamic effects on platform of the railway station during the passage of train that can be unpleasant and even dangerous to the pedestrians. To assess the aerodynamic effects on the platform, two aerodynamic properties has been measured; one is the wind gust induced by the train and the other is the pressure pulses generated when the nose and the tail of train passes. To measure these aerodynamic properties during the train passage, an array of hot-wire type anemometers and several sets of pressure transducers have been used, respectively. This paper deals with the filed test on conventional railway at about l00km/h operational speed, in which total 34 measurements has been made at the Bugok station in Seoul-Busan line for Saemaul and Mugungwha train. The results showed dramatic differences in the aerodynamic features between the two trains that are supposed to originate from the contrasting nose shapes of the trains.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.234-242
• /
• 1999

Flow phenomena such as the pressure transients Inside a high-speed railway tunnel and the Impulsive waves at the exit of the tunnel are closely associated with the characteristics of the entry compression wave, which is generated by a train entering the tunnel. Tunnel entrance hood may be an effective means for alleviating the Impulsive waves and pressure transients. The objective of the current work is to explore the effects of the train nose shape and the entrance hood on the characteristics of the entry compression wave. Numerical calculations using the method of characteristics were applied to one-dimensional, unsteady, compressible flow field with respect to high-speed railway/tunnel systems. Two types of the entrance hoods and various train nose shapes were employed to reveal their influences on the entry compression wave for a wide range of train speeds. The results showed that the entry compression wave length increases as the train nose becomes longer and the train speed becomes lower. The entry compression wave length in the tunnel with hood becomes longer than that of no hood. Maximum pressure gradient in the compression wavefront reduces by the entrance hood. The results of the current work provide useful data for the design of tunnel entrance hood.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.765-771
• /
• 2014

During the acceptance test of KTX, unexpectedly great lateral vibration in 14th~16th train at 150km/h~200km/h was appeared on a straight line in the winter season. Generally, stiffness of secondary suspension in KTX vehicle is one of the most sensitive components on air temperature. So, we examined that the secondary suspension to be mounted heating system was able to reduce the lateral vibration in the tail car of KTX. Also, we verified that lateral vibration from test results on KTX train with wheel conicity 1/20 disappeared. In this paper, we analysis effective reduction methods and the cause of the lateral vibration using model of KTX train and compare with the test results. The analysis results agree well with test ones. From mode analysis result, lateral vibration is occurred at natural frequency range 0.5~0.6Hz with a negative damping value and its natural frequency disappear gradually according to increasing of wheel concinicy.

• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.319-324
• /
• 2006

Studied was a strategy of technology development for railway system in terms of railway network. First, The successful launch of the Korean HST system has not only decreased logistics burden but also significantly transformed the Korean trunk-line railway network, revolutionizing the logistics and technology sectors and reinvigorating the Korean railway industry in one century. Korean railway industry sector is now investing to develop many different types of railway system(G7, Post G7, tilting train...) so that these kinds of various railway system development should be integrated with the National Inter-modal Transportation Network Plan. To secure sufficient capacity that is required by the National Railroad Plan, the railway industry needs to establish mid- and long-term train purchase and operation strategies in compliance with railway construction and operation policies. During a railway construction planning, train operators, based on their train operation strategies, should come up with measures to closely cooperate with project operators from the planning stage through to the opening of a railway system. To be more precise, train operators should establish long-term train procurement plans reflecting both long-term national railroad network plans and plans for each railway line in order to suggest appropriate roles and schedules for each line. Also, based on the long-term railway plan, directions should be decided concerning the research and development of trains in advance.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit