• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.46-54
• /
• 1999

The conventional dyeing of wool/cotton blends involves a two bath two step method, i.e., after dyeing of the wool component with acid dyes in an acidic dyebath at $100^\circ{C}$, the dyeing of the cotton component with reactive dyes in an alkaline dyebath is performed. In order to overcome the disadvantage of the conventional two bath two step dyeing method of wool/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish savings in time, energy and water usage. To improve dyeing property of wool/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of wool/cationized cotton blends with acid dye/reactive dye by one bath two step method.

• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.313-314
• /
• 1991

- The cyclodextrin glucanotransferase (CGTase) of a mutant of Bacillus stearothermophilus was purified in one step by affinity chromatography. The recovery was 95%. The specific activity of the CGTase increased from 26.2 U/mg protein to 485.5 U/mg protein. The purified CGTase was almost homogeneous by SDS-polyacrylamide gel electrophoresis. The one-step purification proved to be feasible with the mutant in contrast to the parent strain, which required pre-purification step of ammonium sulfate precipitation.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.44-51
• /
• 2000

The conventional one bath exhaust dyeing system of nylon]/cotton blends with acid dye/direct dye involves a lot of neutral salt which affect dyeability of acid dyes. Because of conventional one bath exhaust dyeing system of nylonl/cotton blends with acid dye/direct dye needs acid dyes adjusted at a neutral liquor, suitable acid dye is limited. To improve dyeing property of nylon/cotton blends, cotton component was pretreated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. This study was carried out to investigate dyeing possibilities of nylon/cationized cotton blends with acid dye/direct dye in a non-neutral salt dyebath by one bath two step method. The concentration of direct dye was 1.0%, 0.7%, 0.3%o.w.f. respectively at a non, 1%, 3%owf of reserving agent for being almost equal color strength between nylon and 3% cationized cotton when nylon/3% cationized cotton blends was dyed with acid dye/direct dye at concentration of acid dye(1%o.w.f.) by one bath two step method.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.300-305
• /
• 2003

One of the most important parts in constructing radioactive waste repository may be its safety aspect. The fundamental function of the repository is to isolate completely and forever the radioactive wastes disposed of in it. However, since either normally or abnormally nuclides are to be released from the repository with a certain causes. The hydraulic conductivity is related to transportation of nuclide in soil. However, hydraulic characteristics research in unsaturated soil is not enough at present time. A fast and easy procedure for estimating unsaturated flow parameters is presented. The estimation is based on direct measurement of the retention characteristics combined with inverse estimation of the hydraulic conductivity characteristics from one-step outflow experiment.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2011

This study surveyed on the synthesis of one-step type hydrophilic non-porous PU resin and the physical property of the coated fabric for the garment. Three kinds of chain extender such as MEG, 1,4-BD and NPG were used for the preparation of one-step type hydrophilic non-porous PU resin in order to examine the effect of chain extender on the physical properties of PU-coated fabric. And the effects of isocyanate on the physical properties of PU coated fabric were surveyed by mixing with various TDI and MDI ratios. In addition, the physical properties of the coated fabric treated with one-step type hydrophilic non-porous PU resin were examined according to the pre-treatment conditions such as cire finishing. Finally, the washing durability of the coated fabrics was assessed. The coated fabrics treated with PU resin synthesized with PEG1000, MEG and TDI/MDI (6/4) showed the best physical properties. Considering the pre-treatment conditions, best performance of hydraulic pressure, water vapor permeability, and water repellency were obtained with top roller rotation ratio of 150% under 50 ton pressure at $170^{\circ}C$.

• Journal of Nutrition and Health
• /
• v.42 no.2
• /
• pp.158-170
• /
• 2009

This study was conducted to examine the usefulness of adding final probing step (step3) in dietary assessment by 24-hour recall method among Korean adults. One-hundred fifty five adults (37 males and 118 females) above 30 years of age who visited hospitals for health examination were recruited at three hospitals in Korea. One day dietary intake was obtained using 24-hour recall method from each subject. Dietary interview was conducted in 3 steps, (1) quick list of foods eaten during the previous day, (2) detailed information of all the foods eaten, (3) the final probing for any items forgotten. Items added at the step3 were identified and contributions of energy and nutrient intakes were calculated. The average duration of interview was 10.5 min, and time spent for each step was 4.12 minute for step 1, 5.62 minute for step 2, and 38 second for step 3. The average number of dishes reported by the subjects added at the step 3 was 2.2. (Males = 2.6, Females = 1.6) Frequently reported dishes in the step 3 were Beverage, Tea, alcohol (37.1%) and Fruits (31.8%). From mean total energy intake of 1,589 kcal (Men = 1,846 kcal, Women = 1,509 kcal), 179 kcal (11.3%) was added at the step 3. In the step 3, nutrient intakes increased significantly except retinol in total subjects and except retinol and cholesterol in males but all nutrients increased significantly in females. The final probing step can add significant information on intakes of foods and many nutrients with only about 38 seconds of interview time. Confirmation of the results with larger samples of different age groups is needed.

• Structural Engineering and Mechanics
• /
• v.16 no.5
• /
• pp.597-612
• /
• 2003

In this paper, multi-story buildings with shear-wall structures and with narrow rectangular plane configuration are modeled as a multi-step flexural-shear plate with varying cross-section for buckling analysis. The governing differential equation of such a plate is established. Using appropriate transformations, the equation is reduced to analytically solvable equations by selecting suitable expressions of the distribution of stiffness. The exact solutions for buckling of such a one-step flexural-shear plate with variable stiffness are derived for several cases. A new exact approach that combines the transfer matrix method and closed from solution of one-step flexural-shear plate with continuously varying stiffness is presented for stability analysis of multi-step non-uniform flexural-shear plate. A numerical example shows that the present methods are easy to implement and efficient.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.465-471
• /
• 2007

The one step type pole and two step type pole are used in KEPCO's distribution system. The neutral current increases in three-phase four-wire distribution system due to unbalanced load. Usually, power line and communication line are installed at contiguity by effect of topography in Korea. To this end, the damages such as electrostatic induction, electromagnetic induction and harmonic induction generated by induced voltage and current are occured in power line and communication line. This paper calculates the neutral current in KEPCO's distribution system using EMTP by composing various simulated conditions. Also, these results are verified by vector analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.121-126
• /
• 1998

It is one of important issues to find intersection curve? in representation of complex surfaces on a computer. Three typical methods, i.e. the tracing method, the subdivision method, and hybrid method, are often applied to find intersection curves between sculptured surfaces. In this paper two topics are dealt with for efficiency and robustness of the hybrid method. One tropic is about how to determine step sizes variably during tracing, the ethel is about how to find tangential points between surfaces. Tracing by variable step size finds intersections rapidly and requires less memory size. Some illustrations show tangential points between surfaces.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.4
• /
• pp.283-288
• /
• 2002

This paper has shown that the impulse and the unit step responses of 2nd-order systems can be computed by an analytic method. Three different 2nd-order systems are investigated: the prototype system, the system with one LHP(left half plane) real zero and the system with one RHP(right half plane) real zero. It has also shown that the effects of the LHP or the RHP zero are very serious when the zero is getting closer to the origin on the complex plane. Based on these analytic results, this paper has presented two sufficient and necessary conditions for 2nd-order linear SISO(single-input/single-output) stable systems to have the nonovershooting and the monotone nondecreasing step response, respectively. The latter condition can be extended to the sufficient conditions for the monotone nondecreasing step response of high-order systems.