• Title/Summary/Keyword: One Level System

Search Result 3,934, Processing Time 0.035 seconds

INCORPORATING CONTEXT LEVEL VARIABLES TO IMPROVE OPERATION ANALYSIS IN STEEL FABRICATION SHOPS

  • Amin Alvanchi;SangHyun Lee;Simaan M. AbouRizk
    • International conference on construction engineering and project management
    • /
    • 2009.05a
    • /
    • pp.1053-1059
    • /
    • 2009
  • Construction system modeling can enhance work performance by following the behaviors of a system. System behaviors may originate from physical aspects of a system, namely operation level variables, or from non-physical aspects of a system known as context level variables. However, construction system modelers usually focus on only one type of system variable (i.e., operation level or context level) which can lead to less accurate results. Hybrid modeling with System Dynamics (SD) and Discrete Event Simulation (DES) is one of the approaches that has been utilized to address this issue. In this research, an SD-DES hybrid model of a steel fabrication shop is developed, and the benefits of capturing context level variables together with operation level variables in the model are discussed.

  • PDF

The effect of pre-load and fatigue life for one-level pedicle screw system (단분절 척추경 나사못의 피로수명과 Pre-Load의 영향)

  • 김병일;이효재;송정일
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2003.06a
    • /
    • pp.1298-1301
    • /
    • 2003
  • The purpose of this research is to evaluate the effect of pre-load and fatigue life of the distracted one-level pedicle screw system. A spring, which acted as a substitute of the ligament, was installed in the one-level pedicle screw system before testing. The static and fatigue properties are now being tested, which includes 6mm rod to 6mm screw, 6mm rod to 6.5mm screw and 6.35mm rod to 6.5mm screw, under pre-load. Until now as test data were analyzed, 6mm rod to 6.5mm screw was found to have the best performances of stillness and fatigue lift, while 6mm rod to 6mm screw showed the shortest fatigue life. If the stiffness of screw was bigger than that of rod. the fatigue life was prolonged. The fatigue life of the distracted pedicle screw was proved to be shorter than that of the one-level pedicle screw system. So the fatigue life was shortened because of the effect of the spring on the flexibility and stiffness of the rod. In order to obtain the stability of the pedicle screw, more tests are under doing on this topic.

  • PDF

Mechanical Characterization of the Pedicle Screw System for Thoracolumbar Spine (흉요추용 척추경 나사못시스템의 기계적 특성)

  • 이효재;최화순;안면환;송정일
    • Journal of Biomedical Engineering Research
    • /
    • v.23 no.1
    • /
    • pp.17-26
    • /
    • 2002
  • The purpose of this study was to investigate the important Parameters of the Pedicle screw by estimating the mechanical characteristics of screws under static and dynamic loads. Methodology for estimating Parameters under static load was proposed. It was also shown that the fatigue life of the one-level system could be increased by changing the shape of screws. Load parameters of the single pedicle screw were friction force. bending moment. and holding force. The test results of the one-level system could be inferred from teat results of the sin91e screw under bending force Fatigue life of the one-level system with flexible rod was longer than that of the upper Part test without rod . Considering the drop of flexibility of the rod due to muscles and ligament, fatigue life of the one-level system could be estimated b? that of the single screw.

Level Up/Down Converter with Single Power-Supply Voltage for Multi-VDD Systems

  • An, Ji-Yeon;Park, Hyoun-Soo;Kim, Young-Hwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.10 no.1
    • /
    • pp.55-60
    • /
    • 2010
  • For battery-powered device applications, which grow rapidly in the electronic market today, low-power becomes one of the most important design issues of CMOS VLSI circuits. A multi-VDD system, which uses more than one power-supply voltage in the same system, is an effective way to reduce the power consumption without degrading operating speed. However, in the multi-VDD system, level converters should be inserted to prevent a large static current flow for the low-to-high conversion. The insertion of the level converters induces the overheads of power consumption, delay, and area. In this paper, we propose a new level converter which can provide the level up/down conversions for the various input and output voltages. Since the proposed level converter uses only one power-supply voltage, it has an advantage of reducing the complexity in physical design. In addition, the proposed level converter provides lower power and higher speed, compared to existing level converters.

INVERSE SYSTEM AND ARTINIAN O-SEQUENCES OF CODIMENSION 4

  • Shin, Dong-Soo
    • Journal of applied mathematics & informatics
    • /
    • v.25 no.1_2
    • /
    • pp.513-518
    • /
    • 2007
  • There is a one to one correspondence between Artinian algebras $k[x_1,...,x_n]/Ann(M)$ and finitely generated $k[x_1,...,x_n]-submodules$ M of $k[y_1,...,y_n]$ by Inverse System. In particular, any Artinian level algebra $k[x_1,...,x_n]/Ann(M)$ can be obtained when M is finitely generated by only maximal degree generators. We prove that H = (1, 4, 8, 13,..., 27, 8, 2) is not a level Artinian O-sequence using this inverse system.

Two Level-Parallel Type Inventory Systems with Backorder and Redistribution (사후주문과 재분배를 고려한 2수준 재고시스템)

  • 권희철
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.17 no.32
    • /
    • pp.113-120
    • /
    • 1994
  • This study presents a two level-parallel type inventory systems with one upper level facility in the first echelon and n-lower level facilities in the second echelon. The stocks at the lowest facilities can become unbalanced with the random variations in the demands. This paper deals with the imbalance by considering redistribution and backorder. The system with redistribution and the system with backorder and redistribution are analized. The comparison of two cases shows that the system with redistribution and backorder gives smaller stocks than the system with redistribution.

  • PDF

Change of Lumbar Motion after Multi-Level Posterior Dynamic Stabilization with Bioflex System : 1 Year Follow Up

  • Park, Hun-Ho;Zhang, Ho-Yeol;Cho, Bo-Young;Park, Jeong-Yoon
    • Journal of Korean Neurosurgical Society
    • /
    • v.46 no.4
    • /
    • pp.285-291
    • /
    • 2009
  • Objective : This study examined the change of range of motion (ROM) at the segments within the dynamic posterior stabilization, segments above and below the system, the clinical course and analyzed the factors influencing them. Methods : This study included a consecutive 27 patients who underwent one-level to three-level dynamic stabilization with Bioflex system at our institute. All of these patients with degenerative disc disease underwent decompressive laminectomy with/without discectomy and dynamic stabilization with Bioflex system at the laminectomy level without fusion. Visual analogue scale (VAS) scores for back and leg pain, whole lumbar lordosis (from L1 to S1), ROMs from preoperative, immediate postoperative, 1.5, 3, 6, 12 months at whole lumbar (from L1 to S1), each instrumented levels, and one segment above and below this instrumentation were evaluated. Results : VAS scores for leg and back pain decreased significantly throughout the whole study period. Whole lumbar lordosis remained within preoperative range, ROM of whole lumbar and instrumented levels showed a significant decrease. ROM of one level upper and lower to the instrumentation increased, but statistically invalid. There were also 5 cases of complications related with the fixation system. Conclusion : Bioflex posterior dynamic stabilization system supports operation-induced unstable, destroyed segments and assists in physiological motion and stabilization at the instrumented level, decrease back and leg pain, maintain preoperative lumbar lordotic angle and reduce ROM of whole lumbar and instrumented segments. Prevention of adjacent segment degeneration and complication rates are something to be reconsidered through longer follow up period.

Trust Measurement Using Fuzzy Theory and Trade Protocol Recommendation Based on Trust Level in Trusted Auction System (신뢰 기반 경매 시스템에서의 퍼지를 이용한 신뢰도 측정과 신뢰도에 따른 거래 방식 추천)

  • 양근우;허순영
    • Journal of the Korean Operations Research and Management Science Society
    • /
    • v.28 no.2
    • /
    • pp.17-33
    • /
    • 2003
  • The explosive growth of the internet-based transactions requires not only a secure payment system but also an appropriate trust measuring methodology and secure transaction protocols to guarantee the minimal risk for the transacting entities involved in specific transactions. Especially, in internet auction systems where either buyers or sellers or both can be more than one in one transaction, providing those systems that make sure no one transacting entity takes a major risk becomes critical. In this paper, an improved trust measuring method using a relationship-based internet community for an auction system is proposed. The proposed system incorporates fuzzy set and calculation concepts to help build trust matrices and models, which is used to measure the level of risk involved in a specific auction trade concerned. Also, to optimize the auction trade process in terms of cost and time, the proposed system recommends a differentiated trade protocol according to the risk level involved in each auction trade. To test the appropriateness of the proposed trusted auction system, a prototype system has been developed under a Windows-NT environment.

Effect of climate change and sea level rise on taking water of South Thai Binhirrigation system in Vietnam

  • Nguyen, Thu Hien;Nguyen, Canh Thai
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.222-222
    • /
    • 2015
  • Vietnam is one of the most vulnarable countries affected by climate change and sea level rise. One of the consequences of climate change and sea level rise is the increase of salinity intrusion into the rivers which is challenging to irrigation systems in coastal areas. This indicates the necessary to study the ability of taking water through sluice gates of irrigation systems in coastal zones, especially in the dry season with the effects of climate change and sea level rise in the future. In this paper, Nam Thai Binh irrigation system is selected as a case study. The irrigation system is one of 22 biggest irrigation systems of the Red River delta in Vietnam located in coastal region. The computed duration is selected in dry season to irrigate for Winter-Spring crops. The irrigation water for the study area is taken from different sluice gates along the Red River and the Tra Ly River. In this paper, MIKE-11 model was applied to assess the ability of taking water for irrigation of the study area in current situation and in the context of climate change and sea level rise senario in 2050 (under the medium emissions scenario (B2) published by the Ministry of Natural Resources and Environment of Vietnam published in 2012) with different condition of water availability. The operation of the gates depends on the water levels and sanility conditions. The sanility and water level at different water intake gates of Nam Thai Binh irrigation system were simulated with different senarios with and without climate change and sea level rise. The result shows that, under climate change and sea water level rise, some gates can take more water but some can not take water because of salinity excess and the total water taking from the different gates along the rivers decrease while the water demand is increase. The study indicates the necessary to study quantitatively some recommended solutions in the study area particularly and in coastal region generally in Vietnam to ensure water demand for irrigation and other purposes in the context of climate change and sea level rise in the future.

  • PDF

The study on user satisfaction at Military Hospital Information System (군병원정보시스템 사용자의 만족도에 관한 연구)

  • Chung, Woo-Jin;Lee, Soo-Kyung;Shin, Seung-Ho;Cho, Woo-Hyun;Ryu, Si-Won;Lee, Sun-Mi
    • Korea Journal of Hospital Management
    • /
    • v.7 no.2
    • /
    • pp.80-98
    • /
    • 2002
  • The purpose of this study was to investigate user satisfaction at Defense Medical Information System as it has been utilized as a part of National Defense Information Strategies since Aug. 2000. The subjects of this study were nurse officers and army surgeons of a hospital with 1,000 beds. The results of this study are as follows; First, according to the characteristics of the subjects, there was statistically significant difference in system satisfaction, job satisfaction and information satisfaction at Military Hospital Information System. Second, according to the intention of participation, there was a statistically significant difference in user satisfaction at Military Hospital Information System. Third, according to a level of dexterity at Military Hospital Information System, there was statistically significant difference only in job satisfaction. Fourth, factors to influence system satisfaction were one's duty, using period of Military Hospital Information System, and a level of dexterity at Military Hospital Information System. Factors to influence job satisfaction were a level of dexterity at Military Hospital Information System, one's duty and intention of participation. Factors to influence information satisfaction were one's duty, a level of dexterity at Military Hospital Information System, and intention of participation. As the first study on user satisfaction at Military Hospital Information System, this study suggests the followings. First, a plan to inspire users with intention of participating in information system should be prepared. Second, it is necessary to provide policy activities for job standardization of Military Hospital Information System and legal system improvement.

  • PDF