• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.803-808
• /
• 2000

This paper presents development of a different substance monitoring system base reliable detection between the conveyer belt and hopper used for materials transport line of steel company. Conventional detection method of a piece of iron separation system is losed the confidence, because of the place with bad surroundings of measurement so much that materials production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed a different substance detection system using the acoustic emittion sensor and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• IE interfaces
• /
• v.17 no.3
• /
• pp.384-396
• /
• 2004

This paper is concerned with a six sigma green belt training program. Comparative studies of existing training programs for three major companies (Samsung Electronics Company, Hyundai Motor Company, and LG Chemical Ltd.) and two consulting firms (Korean Standards Association and Korea Management Association) are performed. Based on the comparative studies, a cyber green belt training program is developed. The training program, which is composed of 34 modules, follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). This cyber training program is serviced in the homepage http://ise.chonbuk.ac.kr/∼sixsigma. It has been utilized as one semester subject of "Six Sigma Quality Management" in the department of industrial engineering. The advantage and disadvantage of this cyber training program are also discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.119-124
• /
• 2012

Ceramics are becoming one of the most important materials due to its good mechanical properties such as high strength, hardness, chemical safety, and high modulus of elasticity. Ceramics have been used widely as a material not only for construction, but also for vehicles, planes, and bones for the human body. Despite these advantages, ceramics have some limitations in actual use due to its brittle fracture characteristic. In order to develop ceramic belt in this study, the data regarding stiffness and strain is necessary. For this purpose, the sensitivities of maximum stress value and displacement are analyzed by applying the load change on ceramic belt with finite element method program.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.1
• /
• pp.131-145
• /
• 1994

The Cosmic Ray Experiment (CRE) is one of the modules flown on board the KITSAT-1 satellite and consistes of two sub-systems: the Total Dose Experiment (TDE) and the Cosmic Particl Experiment(CPE). The purpose of CRE is to characterize the space radiation environment as encountered by an Earth-orbiting spacecraft. KITSAT-1 orbit is dominated by the inner Van Allen radiation belt. This region has a large population of high energy protons which contributes significantly to both long-term and transient radiation effects. The data shows that the inner Van Allen radiation belt is very stable and the solar activity influences the CPE, TDE data and SEU(Single Event Upset) rates. The result also shows that much larger high energy particle flux is recorded than the predictions of the CREME code.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.385-390
• /
• 2000

The heat pump is one of heating and cooling systems driven by electricity using natural energy as a heat source. The heat pump system was mainly adopted to a cooling system or a refrigeration system. In regions with a large amount of electricity, it is used as a heating system or a heating and cooling system of houses, buildings and agricultural facilities. During cold weather, air source heat pumps do not work well because of some technical problems, such as frosting on evaporator coil when outside air temperature is below -5$^{\circ}C$. In this research, the heat regenerative technology was employed to eliminate the frosting on evaporator coil and improve the COP of the heat pump system. This fiber belt heat regeneration system(FBHRS) has very simple structure consisting of a geared motor and a porous fiber belt passing through alternatively between cold and warm air duct. The laboratory test showed that the heat pump system with a FBHRS yielded an impressive COP higher than 3.5 at the outside air temperature of -7$^{\circ}C$ in heating mode.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.1
• /
• pp.63-73
• /
• 2021

Background: This study was conducted to investigate the effects of pressure belt during proprioceptive neuromuscular facilitation sprinter pattern training using a Thera-band on leg muscle strength and gait in stroke patients with stroke. Methods: Nine patients with stroke underwent training five times a week for four weeks, and changes in the muscle strength and walking ability of the paralyzed leg before and after training were measured. Muscle strength was measured using a Digital muscle tester, and walking ability was measured using a G-WAKER and the timed up and go (TUG) test. Results: Results showed that the quadriceps, hamstring, tibialis anterior, gastrocnemius, cadence, stride length, and stance phase significantly increased (p<.05). The swing phase, gait cycle duration, and TUG test results significantly decreased (p<.05). Conclusion: This study demonstrated that a pressure belt is a very useful tool for improving muscle strength and walking ability in patients with stroke.

• Strategy21
• /
• s.37
• /
• pp.144-176
• /
• 2015

In September 2013, President Park Geun-hye announced her controversial "Look North" policy, of which the most salient aspect is the "Eurasia Initiative". This comprises various proposals designed to overcome existing constraints by developing new markets and creating new economic partners in continental areas from which South Korea has been alienated since the end of World War II, and this dovetails nicely with China's One Belt, One Road Initiative. The concepts of the "Silk Road Rail Express (SRX)" and the "East Sea Rim Maritime Community (ESRMC)" have also been discussed. SRX is at present a purely symbolic railroad project intended to encourage individual, cultural, trade and diplomatic exchanges. ESRMC is a model for establishing an ad hoc community to promote regional economic cooperation around the East Sea. President Park's Eurasia Initiative will provide South Korean investment for the Northeast to complement Russian plans, like the "Northern Energy Road" being built by Gazprom, and Chinese plans, like the Chang-Ji-Tu Development Plan for the North Korean port of Rajin. China's trade, as well as its energy and food supplies, pass through the Strait of Malacca and the Indian Ocean, and are thus vulnerable to interdiction by India or the US. China is therefore trying to reduce its exposure geopolitical risk by establishing a network of corridors between the Belt and the Road to provide alternative paths. The "China-Pakistan Economic Corridor" and the "China-Myanmar Economic Corridor" provide such connections, and South Korea hopes that SRX and ESRMC can become part of a "China-South Korea Economic Corridor". This concept could do much to revitalize the underdeveloped northern provinces of China and Russia's Far East, not to mention North Korea. By linking up the Trans-Siberian Railway, the Trans-China Railway, the Trans-Mongolian Railway and the Trans-Korean Railway all these Asian countries will be connected to one another, and ultimately to Europe. An interim connection between China and South Korea using a rail-ferry has also been proposed.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• Journal of the Korean Society of Costume
• /
• v.23
• /
• pp.211-223
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the one hundred and ten pictures of the writtened Budist scripture. The costume to study were made about 400 years during the King Mok-jong(1006) to the first year of the king Kong-yang based upon the Avatamaka Sutra and the Sutra of the Lotus. 가) Men's wear : 1. Hair style and hair dress : 1) Man bored a hair and put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots, and tied up with a hair ribbon. A kinds of hats were Tung-t'ien-kuan(Yuan-yu-kuan) and Chin-hien-kuan and as a court dress. The man wore pok-여 as an official uniform and wore a pok-du , kun-mo as an everyday dress and wore a helmet as a solidier's uniform. 2. Clothes : 1) They wore Yuan-yu-kuan and Chin-hien -kuan as a court dress, and wore belt, boots, pleated decorated ling skirt also. They wore round shape collor big sleeve jacket, small sleeve long coat, belt , boots as an official dress. 2) the soldiers wore helmet, scarf, yangdang-kap , hung-kap, bak-kap, we-yo-kap, kun-kap and jok-kap and carries arms. 3) The young boys bind his hair up one, two and three angle shape an tied up a hair ribbons. 나) Women's wear : 1. Hair Style and hair dress : high rank ladies made their hair top knot (one, two, or more knots) and tied with hair ribbons , and decorated with precious stone, pan shape head dress , wheel shape head dress. 2. Clothes ; 1) high rank ladie's wore kun -kyun attached jacket , and jacket sleeves decorated pleats and pleats decorated on skirt, apron, back apron, knot belt, scarf.