• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.885-890
• /
• 2007

The purpose of this study is for providing a strategic plan of waterfront belt development at the coastal area of Busan city that might enhance the possibility on healthy use of spare time of the residents and demand of tourism, together with raising the potential and the value added effect of coastal space. This study is one of a series of studies for developing waterfront belt at Busan coastal area. In this study we suggest the new concepts of waterfront belt, waterfront cluster and waterfront greenway. And then we present a model of making waterfront belt through waterfront cluster, which is an aggregate of individual waterfront spaces, using waterfront greenway. After that we apply this model to Haeundae coastal area and test the applicability of the model.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.220-228
• /
• 2005

This study was conducted to investigate the main factors that contain a rotating velocity ratio between wheel and conveyor belt, a tilt angle of conveyor belt and a rotating velocity of a dick cutter for mechanization of Chinese leek harvest. In the survey on the cultivation of Chinese leek, row spacing of 350 m and cutting height of 10 mm from the ground were set up for field tests. Test equipment was designed to cut, pick up and convey Chinese leek one row by one row. From the results of material tests, pick-up height of conveyor belt was set up at $60\~90m$ from the bottom, and the strain and stress at rupture of Chinese leek was 0.487 m/m and 0.01078 MPa. An elastic coefficient of the rubber (Neoprene) of conveyor belts was 1.1077 under the strain of 0.3 nym. from the results of field tests, the tilt angle of conveyor belt was the range of $25^{\circ}\~30^{\circ}$ under consideration far space of container, the velocity ratio between vehicle and conveying belt was 1 to 2.4~1.7 at 0.1~0.3 m/s of vehicle, and optimum rotating velocity of the disk cutter was 34.8 m/s or more under consideration for soil friction.

• Journal of Digital Convergence
• /
• v.15 no.9
• /
• pp.189-200
• /
• 2017

The purpose of this study is to identify the characteristics of China's trade relationships with and dependency on the countries participating in the Belt and Road initiative and to present some implications. This study collected annual total imports, exports, and GDP data from the International Monetary Fund (IMF) on 198 countries and the National Bureau of Statistics of China (NBS) on 221 countries from 1995 to 2015. China's imports and exports have expanded considerably from the mid-1990s to the present, and China's dependence on imports and exports with the US and Japan has declined, while its dependence on the Middle East, South Africa, South America, and Southeast Asia has increased. China has a very high level of dependence on imports from and exports to the countries participating in the Belt and Road initiative, and as the Belt and Road project progresses, the mutual trade dependency between China and the other participating countries is expected to strengthen and expand.

• Korea Trade Review
• /
• v.47 no.6
• /
• pp.307-333
• /
• 2022

In recent years, the outward foreign direct investment (oFDI) in the Belt and Road Initiative (BRI) by Chinese companies has significantly increased in size and changed in content. However, changes in the oFDI patterns between the pre- and post-BRI periods have not received sufficient attention from academia despite their theoretical and strategic significance. This paper reviewed existing research to establish seven hypotheses on changes in the oFDI patterns of Chinese companies investing in BRI countries and conducted empirical analyses to test the hypotheses using secondary data. The results showed that after the BRI agreement, Chinese oFDI in BRI countries was more active in less economically and less institutionally developed countries, that the oFDI by privately-owned enterprises (POEs) increased more than that of state-owned enterprises (SOEs), and that SOEs were more active in the social overhead capital (SOC) area while POEs were more active in the non-SOC area. The paper concludes with a summary, implications, and future research directions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.420-426
• /
• 1998

It is the purpose of this paper to make a preliminary study on the use of repetitive control to improve velocity accuracy by eliminating repetitive disturbances caused by machining inaccuracies of the axis of rotation location. If the control system can be intelligent enough to compensate for such machining errors, then one may be able to improve the accuracy of the velocity control, or alternatively, one may maintain the same accuracy and relax the machining tolerances required. This could decrease cost significantly. Experiments are performed testing repetitive control methods on a constant speed rolling operation testbed. The experimental results show very substantial decreases in the tracking error of the system. Spectral data of the output motion are given to demonstrate the attenuation of the disturbance frequencies and harmonics, related to the bandwidth being used. It is seen that the simplest form of repetitive control which is very easily implemented, can produce striking improvement in control system performance in such belt drive rolling operations, and the learning can be accomplished in a short time.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.672-678
• /
• 2011

This was written based on the type and structure of korean man's waist belt in the early and middle era of the Chosun era. The waist belt was excavated from the Mokdaldong in the Daejeon city. The types of korean man's waist belt in the Chosun era were classified into Wondahae (i.e., round shape belt) and Gwangdahae. The Wondahae consist of two types which are circle shaped and straight types. The circle shaped wondahae contain one fringe in the main body of the belt and its joint part is decorated with a small network such as lacing decoration with the size about 1 cm around. The shape of the Wondahae has been changed from the circle shaped into the straight types and also has a tendency to be wider and longer as time went by. The standard form of the Gwangdahae is straight with about 2-3 cm width and elaborated by lacelike fringe as well. This also has a tendency to be wider starting from the 1600s show. The structure of this belts were divided into braid and ornament parts. The ornament part was constructed with the lacelike netting and fringe parts. The sophisticated craft techniques have a great decorative beauty. Through an analysis of FT-IR, the materials of those three belt are known which are made of the silk and the core thread was filled with cotton. Moreover, it can be confirmed that the glitter material of the ornament part were designed with gold foil and has been analyzed with SEM-EDX.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.275-285
• /
• 2020

The aims of this study was to examine the effect on the hand disinfection performance, the performance rate, and the satisfaction with the use of the belt-type hand sanitizers in clinical nurses. The study is a one group pre-post test quasi-experimental design. Effectiveness of using the belt-type hand sanitizers was measured with a self-reporting questionnaire. As a result, the performance of hand disinfection and the performance rate were significantly higher after using the belt-type hand sanitizers, and also, the satisfaction with the use of the belt-type hand sanitizers was significantly high. The belt-type hand sanitizer is effective method to improve both hand disinfection performance and its performance rate. Therefore, if the belt-type hand sanitizer is used in clinical practice, it may contribute to the improving the hand disinfection performance and its performance rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.201-208
• /
• 2002

In this paper, the control strategy of ratio changing system for a metal belt CVT adopting primary pressure regulation is developed, and the shirting performance of pressure regulating type CVT with the suggested control strategy is investigated. The control strategy suggested in this study is composed of 2 feedback loop, one is speed ratio feedback and the other is primary pressure feedback. The pressure feedback is adopted to ensure prohibiting a belt slip during transient period in a fast downshift mode. Simulation results show that the system with suggested control strategy gives appropriate response time and tracking Performance for upshift and also gives a proper primary pressure which can prohibit the belt slip. In addition, it is fecund that the given system has an acceptable servo property in tracking the target speed ratio and robustness for the disturbance of line pressure.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.23-27
• /
• 2013

Orchard sprayers, wide area dusters and multipurpose control cars are flagship products of Hansung T&I Ltd. Spray pumps are one of the essential parts for these products. But conventional belt pulleys for spray pumps are heavy and expensive, and they bring down the quality as well as productivity of the end-products. Therefore, this study focuses on mold design for aluminum die casting belt pulley and mold manufacture.