• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.458-465
• /
• 2000

Although Fly ash possess viable engineering properties, an overwhelming majority of the fly ash from coal combustion is still placed in storage or disposal sites. Similarly, sludges generated from various water treatment operations are predominantly subject to the fate of land disposal. To prepare sludges for land disposal typically requires time consuming dewatering schemes, which can become extremely difficult to execute dependent upon the composition of the sludge and its affinity for water. This test was undertaken to reuse of fly ash and sludge with mix. In this paper includes of geotechnical properties of fly ash and fly ash-sludge mixture and results of compaction test, unconfined test, falling head test and CBR test and it was analyzed the effect on mixing fly ash with sludge.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.125-126
• /
• 2021

Fly ash, has been widely used as one of the main supplementary cementitious materials (SCMs) in the world, to replace part of cement to significantly save energy and reduce greenhouse emission. Via mechanical activation, fly ash can replace more cement without impairing early age compressive strength. This study focuses on the strength-based evaluation of carbon dioxide emission for blended cement composite containing mechanically activated fly ash. Results indicate that under similar compressive strength, a prominent drop has been witnessed in embodied energy of binary cement and CO2 emission of the composite containing mechanically activated fly ash compared with those containing ordinary fly ash.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.31-32
• /
• 2013

ThThe purpose of this study is to investigate the compressive strength properties of fly ash using water eluted from recycled coarse aggregate. When fly ash come into contact with water, they have not a autonomously chemical reaction. But fly ash is a pozzolan reaction when fly ash come into contact with water and calcium hydroxide(Ca(OH)2) in alkaline environment. For that reason, if water eluted from recycled coarse aggregate use mixture water, fly ash is expected to reaction of pozzolan reaction property in early stage. According to the experimentation result, ICP-MS analysis showed water eluted from recycled coarse aggregate has a high alkali-ash value of pH of 12 and over. And mixing ratio 30% fly ash mortar using water eluted from recycled coarse aggregate showed a similar strength of plain mortar due to the pozzolan reaction. Also, poor strength in initial age, disadvantage of mortar using fly ash, can be improved as hydration in early age is expedited due to calcium hydroxide(Ca(OH)₂) and unhydrated cement component eluted from recycled aggregate mortar.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.23-29
• /
• 2022

Fly ash is a by-product of coal fired electrical power plants and used as a material for cement and concrete; particularly, imported fly ash is mainly applied for cement production. Main objectives of this article are to replace domestic fly ash with an imported source. To verify the possibility of domestic fly ash as a material for cement from the aspect of chemical composition and physical properties, we manufactured various kinds of cement, such as using only natural raw material, shale, and partial replacement with domestic and imported fly ash. When we used the domestic and imported fly ash, there were no specific problems in terms of clinker synthesis or cement manufacturing in relation to the natural material, shale. In conclusion, domestic fly ash has been confirmed as an alternative raw material for cement because 7 days and 28 days compressive strength values were better than those of reference cement using natural raw material, on top of the process issue.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.2
• /
• pp.191-198
• /
• 1999

The purpose of this study is investigating characteristics of the concrete containing Fly-ash according to different 4 mix design, that is, the first mix design is partial replace Fly-ash of cement, second is partial replace Fly-ash of cement and fine aggregate, third is partial replace Fly-ash of fine aggregate, fourth partial replacement of fine and coarse aggregate. For this purpose, selected test variables were water-binder ratio with two levels of 45%, 50%, and Fly-ash contents with four levels 0%, 10%, 20%, 30%, As the result of this study are as follow. 1) The result of mix design of a partial replacement of cement, the slump-flow value was appeared a promotive effect of viscosity. But in case of the over with Fly-ash 10% and the other mix design was not changed slump value. 2) The unit weight of the mixing rate with Fly-ash 0% was $1.875{\sim}1.884t/m^3$, the other mix design 10% over with Fly-ash was $1.846{\sim}1.615t/m^3$, the difference was appeared less about 15% than that. 3) In design, partial replace Fly-ash of fine aggregate, this compressive strength was appeared that the concrete age after 7 days was higher than in partial replacement of cement, therefore, the default of a concrete with Fly-ash, that is the earlier compressive strength was to lessen, was improved. 4) The thermal conductivity of the all mix design was $0.447{\sim}1.144kcal/mh^{\circ}C$, this value was as good as a lightweight aggregate concrete.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.811-816
• /
• 2000

This paper discussed hydrothermal reactivity of Ca(OH)2 and classified bituminous fly ashes which were collected at an electrostatic precipitator in coal fired power plant at 181$^{\circ}C$. The major products of hydrothermal reaction were tobermorite and hydrogrossularite because bituminous fly ashes contained Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 content greater than 20 wt%. As increasing amount of Al2O3 in glass phases, formation of hydrogrossularite increased. Formation rate of crystalline tobermorite increased with content of finer particles, higher glass content and more Al2O3 in glass phases. There was a positive correlation between residue on 45${\mu}{\textrm}{m}$ sieve and hydrothermal reactivity of fly ash up to 3 hours. The hydrothermal reactivity of fly ash at 181$^{\circ}C$ for 12 hours was more affected by fineness than by glass content of fly ash.

• Advances in materials Research
• /
• v.13 no.3
• /
• pp.173-181
• /
• 2024

Fly ash, plastic waste, and clay are mineral materials and residues commonly found in Malaysia. In this study, these materials were fully utilized as raw materials for synthesizing carbon nanotubes (CNTs). Recycled polypropylene, previously used as a food container, served as a carbon source. Fly ash and clay were explored as potential substrates for CNTs growth. The recycled polypropylene was thermally decomposed at 900 ℃ in an inert environment for 90 minutes. Carbon atoms released during this process were deposited on fly ash and clay substrates, which had been immersed in a ferrocene solution to provide a metal catalyst for CNTs growth. The deposited products were characterized using a Scanning Electron Microscope (SEM) and X-Ray Diffraction (XRD). Morphological analysis revealed that both fly ash and clay were coated with fiber-like structures, confirmed to be CNTs based on a diffraction peak around 26° from the XRD pattern. In conclusion, clay and fly ash demonstrate the potential to be utilized as substrates for CNTs formation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.313-319
• /
• 2017

In general, various factors such as grain size, chemical composition, amorphous amount, amorphous Si and Al content of fly ash affect the reaction with cement. In this study, we investigate the effect of fly ash particle characteristics on compressive strength. The standard sand was pulverized to a particle size similar to that of fly ash and the compressive strength was measured by blending with the cement as in fly. Using the measured compressive strength results, strength enhancement by cement hydration reaction and strength enhancement by particle filling effect were confirmed. Strength increment by pozzolanic reaction of fly ash was calculated by using the compressive strength results of mortar substituted with standard powder. As a result of comparison between compressive strengths and the particle characteristics of fly ash, the blaine showed a weak correlation with the compressive strength and the PI(Pozzolanic Index) showed good correlation with the 10% penetration diameter(D10) and the 50% Respectively. Therefore, it is expected that PI will be a good means to evaluate the fly ash characteristics together with the chemical characteristics of fly ash.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.39-42
• /
• 2002

Cloride attack of concrete is one of the important causes of corrosion of reinforcing steel in concrete with carbonation and frost damage. In this paper, the effect of fly-ash on the cloride attack were investigated by varying water binder ratio and fly-ash contents according to the chloride ion penetrationa test. (ASTM C 1202-94) The principal conclusions from this research were as follows: 1) The compressive strength of concrete at large ages, depends more on $C_2$S contents of base cement than fly-ash contents. 2) On the other hand, the chloride ion penetration of concrete at large ages, principally depends on fly-ash contents and the influence of type of base cement is insignificant.

• The KIPS Transactions:PartC
• /
• v.10C no.2
• /
• pp.233-240
• /
• 2003

In this paper, an improved architecture of turbo codec for IMT-2000 is proposed. The encoder consists of an interleaver using an on-the-fly type address generator and a modified shift register instead of an external RAM, and the decoder uses a decreased number of RAM. The proposed architecture is simulated with C/VHDL languages, where BER (bit-error-rate) performances are generally in agreement with previous data by varying interaction numbers, interleaver block sizes and code rates.