• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.87-95
• /
• 2023

Recently, redevelopment of the original downtown area is underway, the necessity of construction in adjacent location is increasing. However, excavations in dense urban areas are prone to ground problems due to various causes, so it is necessary to use materials and methods that can minimize such problems. As a general earth retaining method, various methods such as diaphragm wall and CIP method are applied using cement. However, since a large amount of cement is used for the installation of earth retaining method, it is necessary to conduct research on the development of new cement substitute materials to significantly reduce greenhouse gas emissions. In this study, we utilized the hardening reaction of blast furnace slag powder, desulfurized gypsum and high calcium fly ash by alkali activation and applied it to the SCW method. As a result, it was analyzed that the compressive strength of solidified soil using development solidification material was 96.2 ~ 106.3% of OPC at 28 days of curing. In addition, the strength increment ratio was 2.06 for sandy soil and 2.41 for clayey soil, which was higher than 1.85 of OPC. It seems an advantageous in terms of long-term strength. In addition, from the environmental point of view, it was analyzed that there is no elution of heavy metals and that greenhouse gas emissions can be dramatically reduced. Therefore, if further studies are conducted, it can be applied to the SCW method.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.283-290
• /
• 2009

Differently from fly ash, the bottom ash produced from thermoelectric power plant has been treated as an industrial waste matter, and almost reclaimed a tract from the sea. If this waste material is applicable to foam concrete as an aggregate owing to its light-weight, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and horizontal forces and deformations of retaining wall subject to soil pressure. This study has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was measured in terms of unit weight of concrete, air content, water-cement ratio and compressive strength. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationships between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a mix design proportion of foam concrete while bottom ash is used as an aggregate of the concrete.

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.7-14
• /
• 2004

This study was carried out to survey and confirm the occurring sites of Parnassius bremeri in Korea, and to investigate ecological characteristics to develop a mass rearing technique. In the field survey, adults were found in the two previously known sites in Gyungnam Province and another site was newly found in Samcheok, Gangwon Province. Emergence period of adults was from middle of May to middle of June. Oviposition took place on various material, including hostplant, debris, dead leaves, etc. Eggs were laid singly, up to 126.7 eggs per female. The egg-period was 221.3${\pm}$2.3 days, eggs were hatched from 11th to 22nd of January in the natural condition, and started to feed for about 10 days after hatching. Survival rate of the 1st larvae was 67.6%. Developing period of each instar in the insectary (25$^{\circ}C$, 75% RH, 16L:8D) was 11.2 days for the 1st instar, 7.3 days for 2nd, 12.8 days for 3rd, 16.2 days for 4th, and 18.2 days for 5th, and the pupal period was 21.3 days. The average longevity of adults was 26.2 days. Oviposition rate was higher in the natural condition with enough space to fly for 3♀ : 1 ♂ coupled, at least 3 ${\times}$ 3${\times}$4 m-sized room, than in smaller cage. In a comparison of the preference for visiting on sugar source, black sugar and fructose were effective.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.92-103
• /
• 2015

Box-Wilson experimental design method, known as central composite design, is the design of any information-gathering exercises where variation is present. This method was devised to gather as much data as possible in spite of the low design cost. This method was employed to model the effect of mixing factors on several performances of 60 MPa high strength self compacting concrete and to numerically calculate the optimal mix proportion. The nonlinear relations between factors and responses of HSSCC were approximated in the form of second order polynomial equation. In order to characterize five performances like compressive strength, passing ability, segregation resistance, manufacturing cost and density depending on five factors like water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content, the experiments were made at the total 52 experimental points composed of 32 factorial points, 10 axial points and 10 center points. The study results showed that Box-Wilson experimental design was really effective in designing the experiments and analyzing the relation between factor and response.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.27-36
• /
• 2017

In almost industries, such as the logistics industry, marine fisheries, agriculture, industry, and services, small unmanned aerial vehicles are used for aerial photographing or closing flight in areas where human access is difficult or CCTV is not installed. Also, based on the information of small unmanned aerial photographing, application research is actively carried out to efficiently perform surveillance, control, or management. In order to carry out tasks in a mission-based manner in which the set tasks are assigned and the tasks are automatically performed, the small unmanned aerial vehicles must not only fly steadily but also be able to charge the energy periodically, In addition, the unmanned aircraft need to land automatically and precisely at certain points after the end of the mission. In order to accomplish this, an automatic precision landing method that leads landing by continuously detecting and recognizing a marker located at a landing point from a video shot of a small UAV is required. In this paper, it is shown that accurate and stable automatic landing is possible even if simple template matching technique is applied without using various recognition methods that require high specification in using low cost general purpose small unmanned aerial vehicle. Through simulation and actual experiments, the results show that the proposed method will be made good use of industrial fields.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2021

Recently, the range of utilization and demand for unmanned aerial vehicle (UAV) has been continuously increasing, and research on the construction of a separate operating system for low-altitude UAV is underway through the development of a management system separate from manned aircraft. Since low-altitude UAVs also fly in the airspace, it is essential to establish technical standards and certification systems necessary for the operation of the aircraft, and research on this is also in progress. If the operating standards and certification requirements of the aircraft are presented, a test method to confirm this should also be presented. In particular, the accuracy of small UAV's navigation required during flight is required to be more precise than that of a manned aircraft or a large UAV. It was necessary to calculate a separate navigation error. In this study, we presented a test method for deriving navigation errors that can be applied to UAVs that have difficulty in acquiring long-term operational data, which is different from existing manned aircraft, and conducted verification tests.

• Korean journal of applied entomology
• /
• v.50 no.3
• /
• pp.227-233
• /
• 2011

Crysochroa fulgidissima (Bidan-beole, Spanish fly) is traditionally used as a crude drug and insecticide in the East Asia and Korea, respectively. This study investigated the effect of ethanol extract of C. fulgidissima on the NO production activity. The C. fulgidissima extract was a potent inducer of NO production in CPAE cells and a stimulator of endothelial nitric oxide synthase in a dose-dependent manner. This study also evaluated the anti-inflammatory activity of this extract by determining the level of ICAM-1, VCAM-1, and prostaglandin $E_2$ from HUVEC cells. Although C. fulgidissima extract was a potent inducer of NO production in the CPAE cells, it showed weak inhibitory effects on vascular endothelial growth factor (VEGF) production in HUVEC cells. HPLC and GC-MS analysis of the ethanol extract of C. fulgidissima revealed the presence of cantharidin.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.92-94
• /
• 2001

An experiment was conducted to compare the dietary supplemental influence of artificial zeolite produced from fly ash and natural zeolite on performance and physiological related factor of broiler chicks for five weeks. Diets contained CP 21.5, 19% and ME 3,100, 3,100kcal/kg for starting and finishing period. Three hundred twenty chicks were replaced into five treatments with four replicates. Control, 1.5 and 3.0% artificial(AZ) or natural zeolite(NZ) were supplemented to the basal diets, respectively. Weight gain, feed intake and feed conversion were weekly examined. Blood cholesterol, intestinal microflora, nutrients availability were measured at the end of experiment. Weight gain of chicks fed NZ tended to increase, but was not statistically different. However, the birds of fed 3.0% AZ showed significant decrement of weight gain compared to that of control(P<0.05). Feed intake was no difference in all treatments. Feed conversion was significantly improved in 3.0% NZ treatment relative to that of 3.0% AZ(P<0.05). There were no consistency in intestinal microbes between control and supplemental groups. Blood cholesterol was significantly lower in 3.0% NZ treatments than other treatments(P<0.05). Crude fiber digestibility of birds fed 3.0% NZ was significantly improved compared to that .of other treatments(P<0.05). As the results, artificial zeolite showed no detrimental effect in less than 1.5% addition on performance of broiler chicks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.599-609
• /
• 2008

Development of computer and electronic technology leads innovative progress in spatial informatics and successful commercialization. Geospatial information technology plays an important role in decision making in various applications. However, information display media are two-dimensional plane that limits visual perception. Understanding human visual processing mechanism to percept stereo vision makes possible to implement three-dimensional stereo image display. This paper proposes on-the-fly stereo image generation methods that are involved with various exterior and camera parameters including exposure station, viewing direction, image size, overlap and focal length. Collinearity equations and parameters related with stereo viewing conditions were solved to generate realisitc stereo imagery. In addition stereo flying simulation scenery was generated with different viewing locations and directions. The stereo viewing is based on the parallax principle of two veiwing locations. This study implemented anaglyphic stereogram, polarization and lenticular stereo display methods. Existing display technology has limitation to provide visual information of three-dimensional and dynamic nature of the real world because the 3D spatial information is projected into 2D plane. Therefore, stereo display methods developed in this study improves geospatial information and applications of GIS by realistic stereo visualization.