• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.645-654
• /
• 2021

This research aims to examine the influence of road transportation infrastructure on the mobility of goods transport and the regional economy in Langkat Regency in Indonesia. This type of research is an associative and explanatory research whose data is obtained through a questionnaire survey. This study took a sample of 305 respondents using probability sampling in Langkat Regency, North Sumatera, Indonesia. Data analysis techniques use path analysis. The research results showed that the road transportation infrastructure variables had a significant and positive effect on the mobility of goods transport. Road transportation infrastructure and freight mobility simultaneously have a significant and positive effect on the economy of Langkat Regency. Road transportation infrastructure with the dimensions of road accessibility and maintenance partially directly has a significant and positive effect on the economy of the Langkat Regency. Road transportation infrastructure with the dimensions of road design and road construction quality partially does not have a direct effect on the regional economy, but has a positive and significant effect through the mobility of freight transport. The mobility of goods transport becomes an intervening variable that acts to mediate or determine the relationship between road transportation infrastructure variables to the regional economy.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.71-78
• /
• 2010

Rapid urbanization causes a variety of transportation problems, including traffic delay. Then transportation engineers would get involved in trying to solve traffic delay through road constructed and uncongested policy. But lately, traffic policy changed from vehicle-dominated to humandominated and green transportation. Road diet is one of green transportation. Road diets reduce the number of lanes, lane width because supplement space for green transportation including a bicycle road, side-walk, etc. A study on road diets not enough then this study performed a basic study for road diets. This study on lane width reduce for road diets through analyzes sway of moving vehicle. This study results shows lane width of a compacts-size car needs 2.34~2.70m and lane width of a full-size car needs 2.62~2.89m. According to this study lane width can reduce therefore lane width design criterion have to be relieved. This study will be used in a road width reduce including a road diets, road in process of construction and so on.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1083-1091
• /
• 2009

Modern military equipments are tend to be mounted on a movable truck for their survivability and operation performance. Special units and electronic equipments installed on the truck experience the vibration caused by road roughness during their transport. The level of the transportation vibration is affected by both road conditions and vehicle speeds. In this paper, various experiments on the vibration characteristics of the equipment are carried out via road tests. Transportation vibration is also investigated by numerical analysis using FEM, and natural frequencies and random responses of the launcher are obtained. The PSD and RMS values of acceleration of the equipment are predicted and compared with test results.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.38-44
• /
• 2008

The freight vehicle is mostly used to transport the fruit. Shock and impact generated by the freight vehicle may give serious damage to fruits hence to reduce the fruits damage, the optimum packaging design during transportation by vehicle is required. In order to design the packaging system for fruit transportation optimally, the comprehension of characteristic for vibration and shock acting on vehicles under various road conditions and loading methods is required. This research was performed to analyze the shock characteristics, acceleration level and power spectral density (PSD) of the fruit transportation vehicles under several travel roads and positions. The vibration signal was measured and analyzed at the transportation vehicle operating on the road of three different surface conditions. The maximum acceleration was measured at the rear-end of the vehicle, and the acceleration in the direction of up-and-down (z-axis) was much greater than those in the directions of back-and-forth (x-axis) or right-and-left (y-axis). The peak acceleration in the direction of up-and-down (z-axis) at the vehicle driving on the expressway, the local road paved with concrete, and unpaved local road were 5.3621 G, 8.232 G, and 14.162 G respectively. PSD at 2.44 Hz showed maximum value at all road conditions. The maximum values of PSD on the expressway, a local road paved with concrete, and unpaved local road were 0.0075222 $G^2/Hz$, 0.058655 $G^2/Hz$, and 0.24598 $G^2/Hz$ respectively. The value of PSD decreased with an increase of the vibration frequency of the transportation vehicle. In most cases, the vibration frequency was below 20 Hz during transportation.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.216-222
• /
• 2014

In general, the rail transportation recognized as a better transportation mode than road transportation in terms of the environment. However, due to a lack of quantitative analysis based on Korean data, foreign cases for environmental advantages of the railway have often been cited in Korea. To address this issue, we estimated the energy consumption of passenger and freight transportation using certified activity data from Korea Railroad Statistics and the Electrical Work Report for railway and the Energy Consumption Survey for road. We estimated the Green House Gas emission of passenger and freight transportation on a Tier 1 level by applying the IPCC 2006 Guideline. Finally, we calculated the energy consumption unit and GHG emission unit to determine the environmental impact of rail and road transportation. We also compared the analyzed results of high-speed rail and auto as typical means of rail and road transportation.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.91-99
• /
• 1998

Generally, the tons lifted and ton-kilometers are widely used to analyze the road freight transport. However, these two indicators are simply to show the road freight transport statistics rather than to explain the road freight transportation systems. In this study, the variables such as the number of distribution channel levels, the integral distance, tons in transport and the average transport distance are defined and estimated to investigate the road freight transport system of Korea. In order to compare the road transport system of Korea to other countries, the comparative study was conducted including USA, Japan, Holland and Taiwan. The major findings of this study are as follows; i) The number of distribution channel levels and integral distance of Korea and Taiwan have been increased, but the average transport distance decreased from 1971 to 1996 period. ii) On the contrary to Korea case, the number of distribution channel levels and integral distance of US, Japan and Holland have been decreased, but the average transport distance increased. iii) In the time-series model analysis shows that the number of distribution channel levels are statistically positively closely related to the logistics costs and the costs of transportation as a percentage of GDP.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.43-53
• /
• 1988

This study is to find the proper method of estimating urban road traffic capacity. To estimate road traffic capacity, the following methods are chosen ; 1) crossing point of Q-V and S-V, 2) critical velocity and density of Q-V-K model, 3) V-K model with density parameter. The density estimated through S-V relation is 174 veh./km. The methods used in this paper yields more stable values with 2286 veh./h/ in average. The estimated average capacity by three methods are 2272 veh./h. in multilane road. 2411 veh./h in three lane road and 2185 veh./h. in two lane road.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.197-203
• /
• 2003

Korea Highway Corporation(KHC) began the ambitious KHC Test Road construction project from 1997. It is 7.7km long two-lane highway next to the mainline of Jungbu Inland Expressway. The KHC Test Road construction was completed at the December 2002. It is composed of twenty-five PCC test pavement sections. Section design parameters are (1) concrete slab thickness, (2) base type, (3) base thickness (12, 15, and 18cm), and (4) pavement type. Twenty-five PCC test pavement sections contain 1241 sensors to evaluate the behavior of pavement system under traffic load and environmental change. The behavior of pavement systems will be identified by the observation of sensor measurement and pavement distress survey from test pavement sections. The Test Road research outcome will validate the Korean Pavement Design Guide which is develop by on-going funded research from the Ministry of Construction and Transportation.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.94-99
• /
• 2002

The traffic policy of a city in Korea has brought to many traffic problems by putting emphasis on the only side of mobility in the past that the personal transportation was put first in importance more than the public transportation. As the result of this policy, in the process that the traffic policy of large cities in Korea changes into accessibility, it is shown for re-lighting up the development of the public transportation to be going to be able to get many suggestions in searching for the desirable developing direction of the new means of transportation that will arrive at Korea in the future. Especially, compared with the policy of U.S.A. on the traffic plan that has concentrated on the road and the vehicle, and that of Europe that has put first in the walking and the public transportation system, it is considered as an important thing that the lesson is given to us about what is important for the desirable city development. Transportation can be divided into four; a railroad transportation. a road transportation, a marine transportation, and an aerial transportation.