• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.1-8
• /
• 2012

The road lightings have made our living environment safe and active, since it was first installed in 1900 in Korea. As the industry developed, various kind of road lightings have been installed in an outdoor area. But the spilt light from the road lightings have caused health problem like the sleeplessness, the depression, the failure to thrive and the nearsightedness to children. The light trespass caused by road lightings vary with the height of road lightings, the distance from road lightings to the window and the BUG rating of road lightings. In this paper, we analyze the effect on the light trespass by the spatial installation position of road lightings using by RELUX program. And we derive the characteristics of the light trespass according to the spatial installation position of the road lightings in residential area near road.

• 농촌계획
• /
• 제8권2호
• /
• pp.42-49
• /
• 2002

Since legislation of Rural Minor Road Improvement Act 1990, a quarter of its total length had been paved now. However, over 80% of arterial road length(national+provincial roads) had been paved, so, road improvement policy should be focussed on the local road(county+rural minor roads) from now. Generally, in the greater part of coastal plain and island areas, arterial road intensity(total road length/total catchment area) is relatively low, but local road intensity is relatively high. So, in terms of balanced development, much more efforts for rural minor road improvement should be concentrated in coastal plain and islands areas. In Chonnam Province, the maximum differentials of minor rural road improvement ratio was over 20%(the lowest; 14.1% in Goheung, the highest; 35.6% in Goksung) in 1999, but the improvement budget have been allocated in proportion to unpaved road length of each county by the provincial government. However, the differentials should not be fairly narrowed in the near future if the present budget allocation policy be maintained. To solve this problem, target differentials of rural minor road improvement between regions should be set up for each planning year and road improvement budget be allocated according to this policy change.

• 한국도로학회논문집
• /
• 제12권1호
• /
• pp.71-78
• /
• 2010

급격한 도시화는 교통지체를 포함하여 다양한 교통문제를 유발하였다. 따라서 도로건설, 교통소통 위주의 정책을 통해 교통지체 문제를 해결하기 위해 노력하였다. 그러나 차량중심의 교통소통 정책의 한계를 인식하고 최근에는 인간중심의 녹색교통 정책으로 전환 되고 있다. 도로다이어트는 이러한 녹색교통의 하나로 추진되고 있는 개념이다. 도로다이어트는 차로수, 차로폭 등을 줄여서 확보된 공간에 자전거도로, 보행자를 위한 쾌적한 보행로 등 녹색교통을 위한 공간으로 활용하고자 하는 방법이다. 도로다이어트는 최근에 도이된 개념으로 아직 구체적이고 실증적인 연구가 많이 수행되지 못하고 있는 실정이다. 따라서 본 연구에서는 도로다이어트를 위한 차로폭 축소 방안에 대한 기초적이고 실증적인 연구를 수행하였다. 현장조사를 통해 차로를 주행하는 차량의 차로중심선에서 이격량을 분석하여 차량이 주행시에 필요로 하는 최소한의 차로폭을 분석하였다. 분석결과 소형차의 경우 조사지점별로 2.34~2.70m, 대형차의 경우에는 2.62~2.89m의 차로폭이 필요한 것으로 나타나 도로다이어트 등 설계자의 목적에 따라 차로폭을 다소 축소할 수 있도록 설계기준을 완벽할 필요가 있을 것으로 판단된다. 본 연구결과는 도로다이어트, 도로공사 등으로 인해 동행이 가능한 도록폭이 축소되었을 때 차로폭 축소를 위한 설계기준으로 활용될 수 있을 것이다.

• 농촌계획
• /
• 제16권3호
• /
• pp.159-171
• /
• 2010

Since rapid industrialization of Korean society, out-of-village roads have been greatly improved, while almost all of in-village roads have not been fundamentally improved yet. Unless village roads should be improved in relatively comparison with trunk roads, it has been widely recognized that grass rooted achievement of accessibility revolution not be realized. In this regard, this study tried to develop evaluation indicators system for improvement of village roads. The evaluation indicator system on village road conditions was proposed which is sub-categorized as structural improvement of road itself, its communication serviceability and public securing level of property rights of road site. The system has 6 indicators(2 of each subcategory);good pavement ratio and over 3m wide road length ratio, ratio of household fronting under 2m wide road and connectivity of road network, ratio of registered as 'road' in land category and ratio of publicly owned road sites. In the final conclusion, village roads in rural Korea have been generally in worse condition regardless of whether prior improvement works or not, except some of recent plan-based improvement villages.

• 한국도로학회논문집
• /
• 제14권1호
• /
• pp.1-8
• /
• 2012

도로의 평면 선형은 도로의 안정성과 교통 용량과 관계가 깊다. 도로의 효율적인 유지 관리와 기준에 대한 적합성 평가를 위해서는 도로의 평면 선형을 정확하게 분석하는 방법이 필요하다. 최근 Lidar자료나 GPS를 이용한 도로의 평면 선형 연구가 진행되고 있으나 넓은 지역에서의 평면 선형 곡선 반경을 분석하기에는 여러 가지 문제점을 가지고 있다. 본 연구에서는 수치지형도의 도로중심선을 이용하여 곡선 반경이 도로 구조 시설기준에 적합한지 여부를 평가하는 도구를 GIS 상에서 구현하고자 한다. 또한 $ESRI^{(R)}$ $ArcObject^{TM}$와 프로그래밍 언어인 비주얼 베이직(Visual Basic)을 사용해 도로의 평면선형을 자동적으로 산정할 수 있는 인터페이스를 설계 구현하였다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.92-98
• /
• 2010

Virtual ground modeling is one of key topic for real-time vehicle dynamic simulation. This paper discusses about the virtual 3D road modeling process using parametric surface concept. General road data is a type of lumped position vector so interpolation process is required to compute contact of internal surface. The parametric surface has continuity and linearity within boundaries and functions are very simple to find out contact point. In this paper, the parametric surface formula is adopted to road modeling to calculate road hight. Position indexing method is proposed to reduce memory size and resource possession, and a simple mathematical method for contact patch searching is also proposed. The developed road process program is tested in dynamic driving simulation on off-road. Conclusively, the new virtual road program shows high performance of road hight computation in vast field of off-road simulation.

• 대기
• /
• 제24권4호
• /
• pp.471-479
• /
• 2014

A road surface temperature prediction model (UM-Road) using input data of the Unified Model (UM) output and road physical properties is developed and verified with the use of the observed data at road weather information system. The UM outputs of air temperature, relative humidity, wind speed, downward shortwave radiation, net longwave radiation, precipitation and the road properties such as slope angles, albedo, thermal conductivity, heat capacity at maximum 7 depth are used. The net radiation is computed by a surface radiation energy balance, the ground heat flux at surface is estimated by a surface energy balance based on the Monin-Obukhov similarity, the ground heat transfer process is applied to predict the road surface temperature. If the observed road surface temperature exists, the simulated road surface temperature is corrected by mean bias during the last 24 hours. The developed UM-Road is verified using the observed data at road side for the period from 21 to 31 March 2013. It is found that the UM-Road simulates the diurnal trend and peak values of road surface temperature very well and the 50% (90%) of temperature difference lies within ${\pm}1.5^{\circ}C$ (${\pm}2.5^{\circ}C$) except for precipitation case.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.315-331
• /
• 2014

The present study investigated the effect of the correlation of the measured road roughness profiles corresponding to the left and right wheels of a vehicle on the vibration of a vehicle-bridge coupling system. Four sets of road roughness profiles were measured by a laser road-testing vehicle. A correlation analysis was carried out on the four roughness samples, and two samples with the strongest correlation and weakest correlation were selected for the power spectral density, autocorrelation and cross-correlation analyses. The scenario of a three-axle truck moving across a rigid-frame arch bridge was used as an example. The two selected road roughness profiles were used as inputs to the vehicle-bridge coupling system. Three different input modes were adopted in the numerical analysis: (1) using the measured road roughness profile of the left wheel for the input of both wheels in the numerical simulation; (2) using the measured road roughness profile of the right wheel for both wheels; and (3) using the measured road roughness profiles corresponding to left and right wheels for the input corresponding to the vehicle's left and right wheels, respectively. The influence of the three input modes on the vibration of the vehicle-bridge system was analyzed and compared in detail. The results show that the correlation of the road roughness profiles corresponding to left and right wheels and the selected roughness input mode both have a significant influence on the vibration of the vehicle-bridge coupling system.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.35-45
• /
• 2018

PURPOSES : This study examines the performance changes of road networks according to the strength of a disaster, and proposes a method for estimating the quantitative resilience according to the road-network performance changes and damage scale. This study also selected high-influence road sections, according to disasters targeting the road network, and aimed to analyze their hazard resilience from the network aspect through a scenario analysis of the damage recovery after a disaster occurred. METHODS : The analysis was conducted targeting Sejong City in South Korea. The disaster situation was set up using the TransCAD and VISSIM traffic-simulation software. First, the study analyzed how road-network damage changed the user's travel pattern and travel time, and how it affected the complete network. Secondly, the functional aspects of the road networks were analyzed using quantitative resilience. Finally, based on the road-network performance change and resilience, priority-management road sections were selected. RESULTS : According to the analysis results, when a road section has relatively low connectivity and low traffic, its effect on the complete network is insignificant. Moreover, certain road sections with relatively high importance can suffer a performance loss from major damage, for e.g., sections where bridges, tunnels, or underground roads are located, roads where no bypasses exist or they exist far from the concerned road, including entrances and exits to suburban areas. Relatively important roads have the potential to significantly degrade the network performance when a disaster occurs. Because of the high risk of delays or isolation, they may lead to secondary damage. Thus, it is necessary to manage the roads to maintain their performance. CONCLUSIONS : As a baseline study to establish measures for traffic prevention, this study considered the performance of a road network, selected high-influence road sections within the road network, and analyzed the quantitative resilience of the road network according to scenarios. The road users' passage-pattern changes were analyzed through simulation analysis using the User Equilibrium model. Based on the analysis results, the resilience in each scenario was examined and compared. Sections where a road's performance loss had a significant influence on the network were targeted. The study results were judged to become basic research data for establishing response plans to restore the original functions and performance of the destroyed and damage road networks, and for selecting maintenance priorities.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.22-30
• /
• 2015

This study evaluated road shape and roadside barrier impact on near-road air pollution dispersion using FLUENT computational fluid dynamics (CFD) model. Simulated road shapes are three types, namely at-grade, depressed, and filled road. The realizable k-${\varepsilon}$ model in FLUENT CFD code was used to simulate the flow and dispersion around road. The selected concentration profile results were compared with the wind tunnel experiments. The overall concentration profile results show good agreement with the wind tunnel results. The results showed that noise barriers, which positioned around the at-grade road, decrease the horizontal impact distance (In this study, the impact distance was defined as the distance from road surface origin coordinate to the position whose mass fraction is 0.1.) lower 0.33~0.65 times and change the vertical air pollution impact distance larger 2.0~2.27 times than those of no barrier case. In case of filled road, noise barriers decrease the horizontal impact distance lower 0.24~0.65 times and change the vertical air pollution impact distance larger 3.33~3.55 times than those of no barrier case. The depressed road increase 1.53~1.68 times the vertical air pollution impact distance. It contributes the decrease of horizontal air pollution impact distance 0.32~0.60 times compare with no barrier case.