• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.376-383
• /
• 2008

Generally a return current plane(RCP) of high speed digital and analog part is partitioned. This is achieved in order to decrease the noise interference between subsystem in PCBs(Printed Circuit Boards). However, when the connected signal line exists between each subsystem, this partition will cause unwanted effects. In a EMI(Electromagnetic Interference) point of view, the partition of the return current plane becomes a primary factor to increase the radiated emission. Component bridge(CB) is used for the way of maintaining radiated emission, still specific user's guide doesn't give sufficient principle. In a view point of EMI, design principle of multi-CB using method will be analyzed by measurement. And design principle of noise mitigation will be provided. Generally interval of multi-CB is ${\lambda}/20$ ferrite bead. In this study, When multi-CB connection is applied, design principle of ferrite bead and chip resistor is proved by measurement. Multi-connected chip resistance$(0{\Omega})$ is proved to be more effective design method in the point of EMI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.366-375
• /
• 2008

Generally a return current plane(RCP) of high speed digital and analog part is partitioned. This is achieved in order to decrease the noise interference between subsystem in PCBs(Printed Circuit Boards). However, when the connected signal line exists between each sub system, this partition will cause unwanted effects. In a circuital point of view, RCP partition has a bad influence upon signal integrity. In a EMI(Electromagnetic Interference) point of view, the partition of the return current plane becomes a primary factor to increase the radiated emission. Component bridge(CB) is usecl for the way of maintaining signal integrity, still specific user's guide doesn't give sufficient principle. In a view point of signal integrity, design principle of multi-CB using method will be analyzed by measurement and simulation. And design principle of noise mitigation will be provided. Generally interval of CB is ${\lambda}/20$ ferrite bead. In this study. When multi-CB connection is applied, design principle of ferrite bead and chip resistor is proved by measurement and simulation. Multi-connected chip resistance$(0{\Omega})$ is proved to be more effective design method in the point of signal integrity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.151-160
• /
• 1997

In this paper, we have carried out the DS/CDMA with a suppressed pilot channel, which is used in receiving coherently with Rake diversity and in synchronizing the chip timing, in the mobile satellite communication. Also, we have investigated the envelope variation of a shadowed Rician fading simulator, and analyzed the error performences of DS/CDMA in the mobile satellite communication. The results showed that the error performance in the Heavy shadowing environment might be degraded more than in the Rayleigh fading environment since the fading envelopes in the former environment are varied randomly compared with those in the latter environment. And the performence of DS/CDMA system could be improved about 10 dB compared with that of narrowband QPSK system. In conclusion, DS/CDMA with a suppressed pilot channel had the best performance in the case of the suppressed pilot channel to transmission power ratio $\beta$=-8 dB, the number of complex delay profiles $N_{profile}$=32, and using these values, the error performance of DS/CDMA in Light shadowing environment was identical to the ideal QPSK error performance.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.23-28
• /
• 2016

In this study, an investigation study on EMC(Electromagnetic Compatibility) is presented for power converter circuit. A DC-DC power converter circuit using LT3652 chip is designed and fabricated. The simulation results using ANSYS SIwave for far field radiation and unwanted emissions are presented. To minimize the unwanted emissions, we design a optimized circuit by using capacitors and ground posts. The conducted and radiation emissions are measured in the EMC test chamber based on standardized testing procedures of CISPR 22. The measured EMI emission values for a power converter circuit are presented and compared with the original circuit. The results show that the unwanted emissions from the circuit are tremendously diminished due to the applied EMI reduction techniques. The results proposed here can be usefully applied on designing power converter modules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2379-2384
• /
• 2010

The reception quality of broadcasting in car radio system may become poor due to the noise such as week signal strength, multipath, Adjacent Channel and so on. To improve this, some european nations and US. serve RDS(Radio Data System) on FM radio, AF(Alternative Frequency) and PI(Programme Identification) code contained information in RDS data are used to switch to the broadcasting having the best reception quality. There are many techniques and studies of maintaining the best reception quality. But many previous techniques are no longer the best way because RF chips are improved every year and noise components can be distinguished in detail. So this research will suggest the best switching technique to maintain the best reception quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.364-370
• /
• 2011

The Hilbert transform performs a role to transform band pass signals into low pass signals in wireless communication systems. The operation of Hilbert transform is based on a convolution process which is required adding and multiplying calculations. When the Hilbert transform is designed and hardware-implemented at gate level, the adding and multiplying operation requires a high power consumption and a occupation of wide area on a chip. So the results of adding and multiplying operation cause to degrade the performance of implemented system. In this paper, the new Hilbert transformer is proposed, which has a low hardware complexity by application of MAG(Minimum Adder Graph) algorithm. The proposed Hilbert transformer was simulated in ISE environment of Xilinx and showed the reduction of hardware complexity comparing with the number of gate in the conventional Hilbert transformer.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.477-482
• /
• 2012

The mVoIP service is the technology which focuses on the wireless data service as the IP network having the transmission rate of 100 Mbps classes on the high-speed middle of movement through the WiFi, WiBro and 3G mobile radio communication network, and etc. and is developed. Since 2010, the mVoIP (mobile VoIP) service shows the rapid growth due to 4G-LTE service seriously disclosed from July with the Smart phone and 2,011 it begins to be rapidly popularized. In this research, additionally the mVoIP service industry activation plan is presented with the trends of technology development including the chip-set/module/terminal, etc. based upon local and foreign market trend searchlight through the market demand analysis. The mVoIP service downloads App to the mobile apparatus and or can provide the service as the software through the WiFi network. Therefore, the change which is large in the products development aspect is to be have no. Expected to is being provided as the added service in the case of 4G-LTE as a matter of course, the service deployment where it is based on the market principle and demand needs is needed.

• Korean Parent-Child Health Journal
• /
• v.10 no.2
• /
• pp.147-157
• /
• 2007

Purpose: Assessment of stress and coping effort of hospitalized children's mother are very important factor to support and recover the children. The purpose of this study was to identify the stress and coping effort in mothers whose children are hospitalized. And analyzes the correlation between mother's stress and coping effort on the hospitalized children. Method: This study surveyed 70 mothers whose children are hospitalized. The data was collected for this study at one university hospital in Daejeon from June 1,2007 to July 10, 2007. The instruments used in this study were the mother's stress scale which was developed by Ok-Nam, You(1998), modified by Ho-Jin, Mun(2001), and the mother's coping effort were measured with the Coping Health Inventory for Parents(CHIP) developed by McCubbin and Patterson(1981). The data was analyzed by using SPSS program and include ANOVA, and Pearson's Correlation. Result: The mother's stress was average 2.42 out of a possible 4 points. Type of coping effort was in order of type III(cope with it by understanding medical circumstances)(M=2.73), type I(Cope with it through positive definition)(M=2.43), type II (cope with it by maintaining psychological stability)(M=2.28). Total coping effort according to general character of mothers whose children are hospitalized showed a significant difference in occupation(P<.05). Correlations between mother's stress and total coping effort was r=-.361(P<.05). Conclusion: This study based on nursing of stress and coping effort of hospitalized children's mothers. Pediatric nurses need to establish a stronger communication board and a relationship between medical staff and children's parents so that have supportive information. And to establish a support program that strengthens the coping effort of hospitalized children's mothers.