• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.145-148
• /
• 2002

In a network communication process, cryptographic algorithms play important role for secure process. This paper presents a new system architecture named "DCCS." This system can handle flexible operations of both cryptographic algorithms and the keys. For experimental evaluation, two representative cryptographic algorithms DES and Triple-DES are designed and implemented into an FPGA chip on the SEBSW-1. Then the developed board is confirmed to change its cryptographic algorithms dynamically. Also its throughput confirmed the ability of the real-time net-work use of the designed system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.204-205
• /
• 2015

Exterior insulation board in cast-in-place concrete form system could reduce construction period and improve quality in apartment construction. However, the method is progressed with insulation and concrete frame works at the same time, then risk is increased in duration control and quality management. Therefore, this paper analyzed risk factors through FMEA method. We found that the key risk factors delaying schedule was insulation material that soaked in the rain and quality defects on the insulation material joint. Based on this research, the risk management approach should be developed for improvement of method activation.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.1-6
• /
• 2022

In this paper, we will present the realization of a facial recognition system using the ESP32-CAM board controlled by an Arduino board. The goal is to monitor a remote location in real time via a camera that is integrated into the ESP32 IOT board. The acquired images will be recorded on a memory card and at the same time transmitted to a pc (a web server). The development of this remote monitoring system is to create an alternative between security, reception, and transmission of information to act accordingly. The simulation results of our proposed application of the facial recognition domain are very efficient and satisfying in real time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.300-308
• /
• 2012

In GPS/INS/barometer navigation system for UAV, two procedures were proposed in order to set three reference parameters for the pressure altitude of QNH or QFE settings, using the navigation data from on-board system alone. These procedures yield required the reference parameters through mathematical process with the altitude and the atmosphere properties measured for a short duration of flight, of which a special pattern is requested according to the selected procedure. Dependency only upon the on-board navigation data can eliminate a requirement for the atmospheric measurement system in the ground support system and can expand a flight boundary to a remote area where the ground support is not available. Especially the procedure with the regression method uses altitude and pressure but temperature to produce the three reference parameters. No need of temperature measurement for the pressure altitude system can simplify the on-board air data system.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1297-1299
• /
• 2003

The Present headway on KNR lines varies from 6 to 10 minutes depending on the each line. Therefore KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ECTS on-board system. With the operation of HSR lines in 2004 the bottleneck would be expected within a few sections such as Seoul-Siheung which will be the common route between KTX and conventional lines. This study will analyze and compare the optimal headway can be accomplished by the ATS trackside and that of ETRMS/ETCS on-board system within the Seoul-Siheung section.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.787-797
• /
• 2016

Mining, construction, and other special vehicles for heavy use are designed to work under high-performance and off-road working conditions. The driving and executive mechanisms of the support structures and superstructures of these vehicles frequently operate under high loads. Such high loads place the equipment under constant risk of an accident and can jeopardize the dynamic stability of the machinery. An experimental investigation was conducted on a refuse collection vehicle. The aim of this research was to determine the working conditions of a real vehicle: the kinematics of the waste container, that is, a hydraulic rotate drum for waste collection; the dynamics of the load manipulator (superstructure); the vibrations of the vehicle mass; and the strain (stress) of the elements responsible for the supporting structure. For an examination of the force (weight) on the rear axle of a heavy vehicle, caused by its own weight and additional load, a universal measurement system is proposed. As a result of this investigation, we propose an alternative system for continuous vehicle weighing during waste collection while in motion, that is, an on-board weighing system, and provide suggestions for measuring equipment designs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.236-240
• /
• 2004

We have implemented image monitoring system on PXA255 processor based embedded board that is ported QT/Embedded 2.3.7 version. User is able to monitor camera's capture image for widely separated host PC at client PXA255 board target board by ethernet communication method. And we designed PCI interface card that control motor for camera's Pan & Tilt. Bitmap format's images of $320\times{240}$ size are displayed on PXA255 board's TFT-LCD and User is able to monitor wanted position's image by touch screen input method.

• Journal of Applied Reliability
• /
• v.8 no.2
• /
• pp.101-111
• /
• 2008

Good diagnostics improves both the safety and system unavailability of digital safety systems. The measure of a diagnostic capability is called the Coverage Factor. Because the Failure Modes, Effects and Diagnostic Analysis (FMEDA) provides information on the failure rates and failure mode distributions necessary to calculate a diagnostic coverage factor for a component, the FMEDA can be used as a useful tool to calculate it. Through performing FMEDA on a digital signal processor (DSP) board used in a digital safety system, it is shown that some components of the DSP board can be replaced or improved to satisfy the required diagnostic coverage. That is, the FMEDA can serve as a useful verification tool to design a diagnostic capability for the DSP board.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.9
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• KIISE Transactions on Computing Practices
• /
• v.21 no.5
• /
• pp.365-372
• /
• 2015

Augmentative and Alternative Communication(AAC) is the widespread supporting plan to solve the communication problem of the people with communication disorder. AAC means various types of non-verbal communication methods that are used to augment or substitute the communications of using speech. With the increasing number of potential Korean AAC users, the demands for AAC are also increasing. In spite of the increasing demands, AAC is not being actively and practically used. In this paper, we implemented a web-based AAC board making system, where the board-makers (special educators and speech therapists) can create and share the customized boards to help the board-users (people with communication disorder). The web-based AAC board making system contributes to the application of AAC in many societies, such as hospitals, schools, companies, or anywhere the AAC intervention is needed.