• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1220-1222
• /
• 2001

We proposed a modularization design technique for implementing software of on-board train control system. We already proved the efficiency of CASE Tool(SCADE) for safety critical software design. The several functions of train are implemented on CASE tool each modules. We divided functions of train into modules based on the modularization design. We used MATLAB for design of on-board train control software. We proved that this technique is more useful for the software design of on-board train control for EMU.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.308-311
• /
• 2004

This paper describes design, implementation and functional test of on-board flight analog video system. Video system is the part of the telemetry system as a means of providing flight vehicle's image data. Adopting analog video transmission technique, we could design and test the system in a short time and implement the prototype model with simpler circuits. As results of the functional test, we have made the verification and validation of two cameras' switching in time, and frequency modulation and demodulation of NTSC color signals successfully.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.269-273
• /
• 2005

The on-board system for the air supply to the payload fairing(PLF) of a launch vehicle using both high and low pressure air was designed. The design concept was obtained from the CFD analysis of a Russian interstage air supply system, and a collector was adopted to expand the high pressure air. To verify that the on-board system would work as designed, a simplified axisymmetric computational model was made and a CFD analysis was also performed. It was found that the flow ejected from the hole of the collector expands to the Mach number of 4 and is soon retarded due to the action of viscosity. It was also found that a small gap between the low pressure duct and equipment bay wall can cause large velocity in PLF over the velocity requirement and no gap should be allowed in the design.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.293-295
• /
• 2004

The Engineering Model of on-board computer was developed and tested completely with other sub-systems for STSAT-2. We designed the on-board computer of STSAT-2 which has some improved features compared with that of STSAT-l. A remarkable change is that the on-board computer has a structure of centeralized network communication without a Network Controller of the STSAT-l. That is, the on-board computer directly manages a satellite network. In addition, as many logics are implemented by Field Programmable Gate Array, so we can reduce the weight and size of on-board computer. Also, the developed on-board computer has more improved tolerance against Single Event Upsets and faults than that of the STSAT-l.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.97-104
• /
• 1993

This paper deals with the design problem of a man-on-board(MOB) storage and retrieval warehousing system which is suitable for storing items of small size and light weight. It is assumed that the operator carries out a sequence of retrieving(or storing) operations traveling on a specially designed truck. Considering the operating characteristics of the man-on-board system, an optimal design model is developed in which the investment and maintenance costs of the system are minimized over a time horizon satisfying a set of constructional restrictions. The model is formulated as a nonlinear integer program and a search algorithm is proposed to find an optimum solution.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.447-455
• /
• 2009

The power supply systems, which require low-voltage / high-current output has been changing from the conventional centralized power system to a distributed power system. The distributed power system consists of a bus converter and POL. The most important factor is the system stability in bus architecture design. The overlap between the output impedance of a bus converter input impedance of POL causes system instability and has been an actual problem. By increasing the bus capacitor, the system stability can be easily improved. However, due to limited space on the system board, the increasing of bus capacitors is impractical. An urgent solution of this issue is strongly desired. This paper presents the output impedance design for on-board distributed power system by means of three control schemes of a bus converter. The output impedance peak of the bus converter and the input impedance of the POL are analyzed and then conformed experimentally for stability criterion. Furthermore, the design process of each control schemes for system stability is proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.161-166
• /
• 2021

When testing various images outdoors with an infrared imaging system, it is necessary to save the tested images for comparison. In addition, after the test, it should be possible to easily connect to the PC and download the stored data. With the recent development of the memory system, it is possible to design an infrared image storage board for an outdoor test by using the eMMC memory that can be easily used in the form of an on board. In this paper, we describe the design of a portable image storage board that can easily store and download infrared images, and describe the GUI program that can connect to a PC and download the stored images.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1499-1504
• /
• 2013

As oil price and demand for environment friendly vehicle rapidly increase, research on electric car is being widely carried out. Especially, NEV(Neighborhood Electric Vehicle) is a pollution-free vehicle that can be mass-produced which the time of development for related technologies is urgently needed. In this paper the On-Board charger for mid- and large- sized secondary cell is applicable in aerospace and other general industries, and the Off-Board standing charger is expected to be employed in creating charging infrastructure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1650-1658
• /
• 2019

In recent years, IoT device and platform become widely popular and the computing performance and capabilities of IoT devices are also getting improved. However, the size and computing resources of IoT devices, especially small single board computer, are limited in a way that the design and implementation of the system should be carefully considered to operate on the devices. Recently, SDR technologies are adapting in IoT devices and can perform various radio systems. Thorough analysis and investigation of computer performances on small single board computer are necessary for its usage. In this paper, we present the results of computing resources measurement and analysis on small single-board computers. At first, we consider to design SDR based spectrum sensing for single board computer, investigate various key factors and propose a design procedure that can affect performance of the system with experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1962-1967
• /
• 2009

This paper deals with a design of a platform to simulate PRT vehicle operational control algorithms using on-board embedded process board. The configuration of the platform is composed of the central control module, the station control module, man-machine interface and monitoring module. Since PRT system needs inherently very reliable vehicle operational control algorithm in order to avoid the impact between vehicles, it is very important to construct a simulation platform to test a designed vehicle operational control algorithm during the development process For the test of the proposed platform a path of the each moving vehicle is predefined in the central control system before the dispatch order is given to the vehicle. The simulation results show the effectiveness of the proposed simulation platform for test and evaluation of the PRT operational control algorithms.