• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.305-308
• /
• 2002

This paper proposes a control board that includes PNP function with extensibility and effective allocation of allocation. The object of study is to overcome limited extensity of old systems and it is to reuse the system. The system recognizes automatic subsystem from application of main system with board level that is using hardware and software co-design method. The system has both function of main-board and sub-board. So one system can operate simultaneously such as module of alien system. This system has advantages that are fast execution, according as process functional partition to hardware/ software co-design and board size is reduced as well as offer extensity of development system. We obtained good result with control board for existent Z-80 training kit.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1433-1435
• /
• 2000

Currently KERI is participating a project whose goal is to develop the Korean High-Speed Train(KHST) with maximum speed of 350kph. KERI's responsibility is the electrical system engineering that includes engineering design of an on-board computer system for diagnosis and control of train set and electrical/mechanical devices. A system engineering approach of the design is performed in order to guarantee the passenger safety and economically viable train for on-board control system construction, operation and maintenance. This paper presents the draft engineering des on-board computer system that ensures the s and reliability of KHST. The draft is focuse network interfaced distributed processing system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.951-958
• /
• 2013

This paper proposes the controller design for a stability improvement of an on-board battery charger. The system is comprised of a power factor correction (PFC) circuit and phase shift full-bridge DC-DC converter. The PFC circuit performs the control of the DC-link voltage and the input power factor. The DC-DC converter regulates the voltage and the current in the battery using the DC-link voltage. This paper proposes the design method of PI controller for the PFC circuit using a small signal model. The analysis and design of a type-three controller for the DC-DC converter is also presented. A simulation and experiment has been performed on the on-board battery charger and their results are presented to verify the validity of the proposed system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2221-2226
• /
• 2009

This paper presents the design of the LED sign board system installed on the exterior of a building and powered by a photovoltaic system. A grid connected photovoltaic system has been designed with the capacity estimate of the load, battery and power. After the luminance and uniformity of LED load has been checked, the sign board and the solar cell modules have been installed. The performance and problems occurred during the field test for the photovoltaic LED sign board system have been analyzed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.86-95
• /
• 2014

For the accomplishment of satellite's own missions, complicated control procedures and commands are required. Although absolute-Time Command and Command Sequences have been applied for controlling satellite and its operation historically, these command system only has a capability to manage sequential control process and has a limitation that cannot deal with decision and branch for corresponding to the condition of the time. To resolve above limitation, KARI has designed RTCSC which is mainly based on the existing RTCS but adopts a one-byte Op Code for supporting decision making and conditional branch. This paper introduces the design and implementation of RTCSC as On-Board Control System like OBCP, VML and IP.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.384-389
• /
• 2008

In this paper, we propose a UML modeling of ATO on-board software. An automatic train operation (ATO) system is a real-time control system, which operates a train without a manual operation by a driver. For the safe and comfortable service, real-time embedded software for ATO on-board equipment should have both of high performance and reliability. UML-based object-oriented modeling technique is introduced and used widely to design software that satisfies this requirement. We used Rhapsody, which is a modeling tool for real-time embedded software, to model the construction and the behavior of ATO on-board equipment. As a result, ATO on-board software which performs the profile calculation and the real-time speed control is designed and implemented. The brief modeling result including behavioral characteristics and the simulation results are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.