• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.305-308
• /
• 2002

This paper proposes a control board that includes PNP function with extensibility and effective allocation of allocation. The object of study is to overcome limited extensity of old systems and it is to reuse the system. The system recognizes automatic subsystem from application of main system with board level that is using hardware and software co-design method. The system has both function of main-board and sub-board. So one system can operate simultaneously such as module of alien system. This system has advantages that are fast execution, according as process functional partition to hardware/ software co-design and board size is reduced as well as offer extensity of development system. We obtained good result with control board for existent Z-80 training kit.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.27-33
• /
• 2011

Carbon Board는 전자파 차폐 신소재로서 Design을 접목하여 Art Wall로 개발될 수 있으며, 친환경 건축 소재를 벽체 시공재로 이용할 경우, 마감재로도 사용될 수 있음이 파악되었다. Carbon Board의 필요성이 증가하고 있는 경향에 따라서, Module 구조를 가진 Tile, Panel 형태의 목판에 요구되는 그림, (성형)조각, 및 Graphic Design, Motif의 재구성 또는 결합으로 전체를 접착하거나, Point 부분만 장식하여 다양한 Style과 새로운 표현을 만들어 낼 수 있다. 본 논문은 인테리어산업에서 기대되는 목판화 기법의 Pattern Design을 MDF(Medium Density Fiber) Board와 Carbon Board에 적용하여, 내구력의 유용성에 관련하는 구조적, 물리적 특성을 비교하였다. (1) 정형(조립) (2) 표면(개량) (3) 세공(&조형)의 Detail Pattern과 Trimming Technique은 주로, 재질의 경도와 관련 밀도에 따라 Design의 변화를 나타내는 분석에서, Carbon Board도 MDF Board와 접합, 연결하여 Living system의 가치를 창조하고, 휴머니즘을 나타낼 수 있는 고급 내장재로서의 적용 가능성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1433-1435
• /
• 2000

Currently KERI is participating a project whose goal is to develop the Korean High-Speed Train(KHST) with maximum speed of 350kph. KERI's responsibility is the electrical system engineering that includes engineering design of an on-board computer system for diagnosis and control of train set and electrical/mechanical devices. A system engineering approach of the design is performed in order to guarantee the passenger safety and economically viable train for on-board control system construction, operation and maintenance. This paper presents the draft engineering des on-board computer system that ensures the s and reliability of KHST. The draft is focuse network interfaced distributed processing system.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.951-958
• /
• 2013

This paper proposes the controller design for a stability improvement of an on-board battery charger. The system is comprised of a power factor correction (PFC) circuit and phase shift full-bridge DC-DC converter. The PFC circuit performs the control of the DC-link voltage and the input power factor. The DC-DC converter regulates the voltage and the current in the battery using the DC-link voltage. This paper proposes the design method of PI controller for the PFC circuit using a small signal model. The analysis and design of a type-three controller for the DC-DC converter is also presented. A simulation and experiment has been performed on the on-board battery charger and their results are presented to verify the validity of the proposed system.

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2221-2226
• /
• 2009

본 논문에서는 태양전지를 기본 전력공급원으로 사용하는 대형건물용 옥외간판 LED 표식장치를 시스템을 구현하였다. 부하 발전 배터리 용량을 산정하고, 상용 예비전력을 도입한 계통연계형 태양광발전시스템을 설계하였다. 표식장치인 LED 부하에 대한 사전 휘도 시뮬레이션 및 균일성 검사를 거친 후, 이를 태양광발전시스템과 함께 설치하였다. 태양전지-LED 표식장치 현장 시험운영을 통하여 시스템의 신뢰성과 성능 및 제반 문제점을 파악하였다.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.

• 항공우주기술
• /
• 제13권1호
• /
• pp.86-95
• /
• 2014

위성의 임무를 성공적으로 수행하기 위해서는 복잡한 처리 절차와 이를 위한 명령이 필수적이다. 이를 위해 절대 시간 명령과 순차 명령 집합이 적용되어 위성의 운용에 사용되고 있다. 이러한 명령 체계는 순차적인 제어 흐름을 처리할 수는 있으나 해당 시점에서의 여러 조건에 대한 다양한 의사 결정 및 이에 따른 분기를 처리하기 힘들다는 단점이 있다. 이를 해결하기 위해 한국항공우주연구원 위성비행소프트웨어팀에서는 기존의 순차명령집합인 RTCS의 기본 형태를 유지하고 1 바이트의 연산 코드를 추가함으로써, 조건 판단 및 분기가 가능한 조건형 순차명령 집합인 RTCSC를 개발하였다. 여기서는 OBCP, VML 및 IP와 같은 위성 운용을 위한 On-Board Control System으로서의 RTCSC의 설계 및 그 구현에 대하여 소개한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.384-389
• /
• 2008

In this paper, we propose a UML modeling of ATO on-board software. An automatic train operation (ATO) system is a real-time control system, which operates a train without a manual operation by a driver. For the safe and comfortable service, real-time embedded software for ATO on-board equipment should have both of high performance and reliability. UML-based object-oriented modeling technique is introduced and used widely to design software that satisfies this requirement. We used Rhapsody, which is a modeling tool for real-time embedded software, to model the construction and the behavior of ATO on-board equipment. As a result, ATO on-board software which performs the profile calculation and the real-time speed control is designed and implemented. The brief modeling result including behavioral characteristics and the simulation results are presented.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.