• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.637-642
• /
• 2000

IEEE 1149.1 boundary scan architecture is used as a standard in board-level system testing. The simplicity of this architecture is an advantage in system testing, but at the same time, it it makes a limitation of applications. Because of several problems such as 3-state net conflicts, or ambiguity issues, interconnect testing for multi-drop multi-board systems is more difficult than that of single board systems. A new approach using IEEE 1149.1 boundary scan architecture for multi-drop multi-board systems is developed in this paper. Adding boundary scan cells on backplane bus lines, each board has a complete scan-chain for interconnect test. This new scan-path insertion method on backplane bus using limited 1149.1 test bus less area overhead and mord efficient than previous approaches.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.27-36
• /
• 2004

Software summarized packaging technology related is needed for low cost and high efficiency in production and packaging design of corrugated board, and in development of these softwares, distribution and packaging environment of one's country must be reflected, well. In domestic occasion, software related to corrugated board packaging dont's exist nearly, and in many industrial fields, the more higher role and importance of packaging in various industrial field is, the more higher necessity of that is. In this study, on the base of preceeding studies (Park, 2001; 2003; 2003), software to optimize board combination that is most importance and sensitivity in composition of cost elements in production and packaging design of corrugated board was developed. This software was composed of input module, output module, database and management module, and calculation module, and efficiency of this software was analyzed on the both sides of sensitivity in design result and effectiveness in a case analyse. In the inward design results having same strength, board combination balance, bursting strength, box weight, and cost were greatly different. Therefore, optimum inward design according to user's design specifications is possible, and in a case analysis for actual products, obtained the more profitable results than before design.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.29-34
• /
• 2012

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt papermaking system(CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium Carbonate(AZC) and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.241-250
• /
• 2020

This study examines the relationship between the attributes of board structure and the likelihood of financial distress for the non-financial sector of an emerging market characterized by concentrated ownership and family-controlled business. The present study utilized panel logistic regression to estimate the relationship between board structure attributes and the likelihood of financial distress. We used Altman Z-Score as a proxy for firm financial distress, as this tool measures the financial distress inversely. The study finds a significant relationship between board size and the likelihood of financial distress. The results show that a one-unit increase in board size would decrease the probability of financial distress by 3.4%. Further, we observe that a greater level of board independence is associated with a lower likelihood of financial distress. A one-unit increase in board independence would decrease the probability of financial distress by 20.4%. We also find a significant positive impact of leverage on the likelihood of financial distress. The present study contributes to the body of literature on board structure attributes and likelihood of financial distress in emerging markets, like Pakistan. Furthermore, the findings would be beneficial for corporate policymakers and investors in formulating corporate financial strategy and predicting business failure.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.461-469
• /
• 2017

A segment of the wave board has been expressed as a submerged line segment in the two dimensional wave flume. The lower end of the line segment could be extended to the bottom of the wave flume and the other opposite upper end of the board could be extended to the free surface. It is assumed that the motion of the wave board could be defined by the sinusoidal motion in horizontal direction on either end of the wave board. When the amplitude of sinusoidal motion of the wave board on lower and upper end are equal, the wave board motion could express the horizontally oscillating submerged segment of piston type wave generator. The submerged segment of flap type wave generator also could be expressed by taking the motion amplitude differently for the either end of the board. The pivot point of the segment motion could play a role of hinge point of the flap type wave generator. Simplified analytic solution of oscillating submerged wave board segment in water of finite depth has been derived through the first order perturbation method at two dimensional domain. The case study of the analytic solution has been carried out and it is found out that the solution could be utilized for the design of wave generator with arbitrary shape by linear superposition.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.339-347
• /
• 2021

Piston type wave makers or flap type wave makers are usually adopted as a wave maker which disturbing the fluid domain with sinusoidal motion. Recently hybrid wave maker which could be operated as not only piston type and/or flap type but also swing type wave maker have been devised by utilizing the link mechanism. The wave board of hybrid wave maker has been devised to be independently controlled by the horizontal actuators on upper and lower end of the wave board. The wave board could operate as a flap type wave board when the lower hinge is in a stationary condition and the upper hinge is operated with sinusoidal motion. On the contrary, the swing type wave board could be obtained by the lower hinge is activated and the upper hinge is in a stationary condition. When both end of the wave board is activated in a synchronized condition, the wave board motion become piston motion. In addition the hybrid wave maker could enhance the piston motion with flap motion or swing motion by selecting control parameters. Various wave board motion of hybrid wave maker and relevant wave form have measured on the wave board and departed location. It is appeared that the novel hybrid wave maker could be utilized for the improvement of wave qualities in experiments.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.37-42
• /
• 2014

목 적 : Belly board를 사용한 골반부 치료 시 엎드린 자세로 인해 set-up의 재현성이 다른 치료부위에 비해 떨어진다. 이에 본 연구에서는 기존의 belly board만 사용 시 발생했던 단점들을 보완하기 위해 VLT belly board(Vac-lock type belly board)를 자체 제작하여 그 유용성을 검증하고 set-up의 재현성을 높이고자 한다. 대상 및 방법 : 기존의 belly board를 사용하여 치료한 환자의 OBI 영상과 자체 제작한 VLT belly board를 사용하여 치료한 환자의 OBI 영상을 비교하였다. OBI는 전체 치료과정 중 3번을 시행하였는데, AP 방향, LAT 방향에서 각각 실시하였다. 2차원정합을 이용하여 X축 좌 우방향, Y축 상 하방향, Z축 전 후방향에서 발생하는 set-up에 대한 오차를 측정하여 비교 분석하였다. 결 과 : 영상 2차원 정합을 이용한 set-up의 평균 오차는 X축 방향으로는 0.32 cm에서 0.12 cm으로, Y축 방향으로는 0.41 cm에서 0.19 cm으로, Z축 방향으로는 0.29 cm에서 0.17 cm으로 VLT belly board 사용한 결과의 평균 오차가 감소하였다. 또한 VLT belly board 사용 시 0~0.29 cm의 오차가 48%에서 83%로 증가되고 0.5 cm 이상의 오차가 21%에서 2%로 감소를 보였다. 결 론 : VLT belly board 사용은 기존의 belly board 사용에 대한 효과를 유지하면서 환자 개인의 특성에 맞는 Vac-lock 제작을 통하여 set-up의 오차를 줄여줄 수 있음을 확인했다. 따라서 엎드린 자세로 골반부 치료 시 VLT belly board는 매우 유용할 것이라고 사료된다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권12호
• /
• pp.191-201
• /
• 2021

The objective of this research is to investigate how the board of directors' characteristics influence sustainability disclosures with the mediating effect of corporate governance. The independent variables are the characteristics of the board of directors, which consist of the presence of women on the boards, presence of directors aged over 50 years old, education level, education field, board tenure, and compensation. The dependent variable is sustainability disclosures, which is measured by the GRI standard disclosure, whereas the mediator variable is the CG score. Research samples are 460 companies listed on the Stock Exchange of Thailand (SET). Path Analysis is used to examine the correlation between the board of directors' characteristics, CG score, and GRI standard disclosure. The research findings show that senior boards, the education field, and compensation motivation have an effect on sustainability disclosures, whereas corporate governance is a mediator of the effect of the education field of boards on sustainability disclosures. This finding should help shareholders to choose individuals with suitable characteristics to serve on the board of directors, and, as a result, shareholders should anticipate a profitable result to be generated, while the business of the company is conducted in a sustainable way.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.243-253
• /
• 2021

This study aims to examine (1) the association between the chief executive officer tenure and audit quality, (2) the relationship between chief executive officer duality and audit quality, (3) the association between board independence and audit quality, (4) the relationship between board size and audit quality, and (5) the role of controlling variables (client size, leverage debt, and business complexity) in controlling these relationships. The research sample includes 325 financial reports from manufacturing firms listed in Amman Stock exchange over the 2014-2018 period. The study relationships are tested by using logistic regression. The results revealed a negative relationship, but not significant between CEO tenure and independent directors with audit quality. In addition, the results showed there is a negative effect of CEO duality on audit quality; also the results revealed that there is a statistically significant effect on the board of directors (board size) on the AQ. In general, the coefficient estimates of controlling variables show that client size and leverage debt positively affect audit quality, and on the contrary, business complexity has an insignificant positive relationship with audit quality. The summary of the study findings play an active role to external auditor opinion on business practice in towered the corporate governance system.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.65-78
• /
• 1990

For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.