• Journal of the Korean Society of Safety
• /
• v.19 no.3 s.67
• /
• pp.78-83
• /
• 2004

The channel-type lining board that partial welded on many partition frames is used to normal servicing lining board type. On this study is to investigate existing channel-type lining board's capacity by using the static loading test. From this study, to develop new-type lining board which reflect well cross section area and sectional modulus of existing channel-type lining board. Six types FEM model are adopted. The accumulated test results of stress conditions and deflections by section shapes will be used to analyzed the relation between the capacity and the section shape. With the comparing the results of static loading test and FEM analysis.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.233-246
• /
• 2020

This paper investigates the effect of the involvement of the board chairman in the audit committee (AC) on earnings management (EM). It examines Bursa Malaysia-listed companies with the lowest positive earnings for the years 2013 to 2015. The Modified Jones Model by Kasznik (1999) was used to determine discretionary accruals. An AC that includes its board chairman as an ordinary member is associated with greater discretionary accruals. However, a board chairman who is also the chairman of the AC does not seem to influence discretionary accruals. This paper supports the agency theory and policy-makers' efforts to prevent board chairmen from sitting on ACs. It is the first study that uses the agency theory to describe the association between the board chairman's involvement in the both AC and EM. This study alerts policy-makers, stakeholders and researchers to the influence of a board chairman serving on the AC in curbing EM. Furthermore, it provides empirical evidence that the majority of Malaysian companies whose board chairmen are involved in the AC appoint the chairman as an ordinary member of the AC. This indicates that executive directors may affect such actions. Hence, more policies are needed to improve AC independence.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1499-1504
• /
• 2013

As oil price and demand for environment friendly vehicle rapidly increase, research on electric car is being widely carried out. Especially, NEV(Neighborhood Electric Vehicle) is a pollution-free vehicle that can be mass-produced which the time of development for related technologies is urgently needed. In this paper the On-Board charger for mid- and large- sized secondary cell is applicable in aerospace and other general industries, and the Off-Board standing charger is expected to be employed in creating charging infrastructure.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.3
• /
• pp.9-16
• /
• 2018

In this paper, I purpose one of the development methods for portable Automatic field Test Equipment(ATE) with VME form factor. Almost portable ATE have not used to standards form factor and they are connected by mechanical non-rigid general connectors and wire harnesses among the components. Furthermore, it is hard to reuse developed board. So, it decreases to reusability of developed board and it is hard to maintenance of ATE. Even those things have weakness for vibration and drop test especially in portable ATE. The XK9A1 ATE using VME form factor has environmental reliability through vibration, drop, temperature test. It consists of 5 developed board called the control board, the wire & wireless communication board, the power supply board, the load board and the mother board. It is connected by two wire harnesses between mother board and extern circular connectors. The control board send the data and address to other board though each 16-bit data and 20-bit address line. You can develop the function board what you want to using those data & address line when it comes to needing other function board.

• Asia-Pacific Journal of Business
• /
• v.13 no.1
• /
• pp.89-102
• /
• 2022

Purpose - We examine empirically the relationship between the board of directors and the corporate performance using board characteristics related variables. Design/methodology/approach - We empirically test the hypotheses using fixed effects models (FEM), using data of 3,703 listed non-financial companies in China from 2010 to 2019. Findings - First, the ownership of board of directors is positively related to ROA. Second, the size of the board of directors is positively related to ROA. Third, there is no evidence that interaction between characteristic variables related to the board of directors affect the corporate performance. Research implications or Originality - These results show that as the board of directors has larger ownership, the degree of identity of interest between stock holders and the board becomes bigger to reduce agency cost, then it lets the board make decisions to improve the corporate performance. In addition, as the board of directors becomes bigger, the board has strong independence to play the role of monitoring and advising, then it leads to improvement of corporate performance.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.914-917
• /
• 2008

This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

• Physical Therapy Korea
• /
• v.9 no.1
• /
• pp.53-61
• /
• 2002

The purpose of this study was to compare the body alignment during standing on level and wedge board. Twenty healthy college students (8 females, 12 males) were evaluated in this study. Diagnostic contourline potographic imaging system (Model JTC-1, Jodang Trading Co.) was used to measure body alignment. Sagittal and frontal plane images were used to analyze the body alignment. The result showed that the cervical and lumbar lordotic curve significantly decreased during standing on wedge board when compared with standing on level. On the other hand, thoracic kyphosis significantly increased during standing on wedge board. There was no significant difference in body alignment according to gender, weight, and height. Clinically, patients with low back pain and severe lordosis may be affected by heel wedge. Further study is needed to identify whether the standing on wedge board can change the body alignment in patients with low back pain and spinal deformity.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.17-25
• /
• 1994

This study was carried out to compare the properties of Com-Ply Boards with those of OSBs. These two kinds of boards were made of same flakes. Com-Ply Boards were covered with three different thickness veneers, such as 4mm, 3mm, and 2.5mm. All manufactured Com-Ply Boards and OSBs were 12mm thick. In MOR, all Com-Ply Boards were higher than OSB, and especially 3mm-veneer and 2.5mm-veneer Com-Ply Board were highest. But OSB showed 420kg/$cm^2$. 3mm-veneer Com-Ply Board showed the highest internal bonding 7.0kg/$cm^2$ and then 2.5mm-veneer showed 6.8kg/$cm^2$, and OSB showed 6.6kg/$cm^2$. Screw holding strength showed the high value 23.9kg/$cm^2$, 25.5kg/$cm^2$, and 29.3kg/$cm^2$ respectively at 3mm-veneer, 2.5mm-veneer Com-Ply Board and OSB. Thickness swelling of Com-Ply Boards was lower than that of OSB, but Water absorption of OSB was lower. Finally it was very encouraging that all properties of OSB without veneer, whose cost is higher than flake and whose properties is better, were not worse than those of Com-Ply Board with veneer. It seems That more researches on OSB will be required.