• Journal of Welding and Joining
• /
• 제9권3호
• /
• pp.41-51
• /
• 1991

The thermomechanical coupling phenomena in the resistance welding process is complicated due to interactions of mechanical, thermal and electrical factors. Although experimental investigations of resistance spot welding have been carried out, but there are a few by computer simulation. so the purpose of this research is to decrease the time and cost much required in experimental investigation by carrying out the analysis of the resistance spot welding process through computer simulation based on the finite element method. The tool used in the computer simulation is the commercial ANSYS program package. A two dimensional axisymetric model is used to simulate the resistance spot welding for two stainless steel sheets of equal thickness and parametric study is carried out for variable welding current, workpieces of unequal thickness and dissimilar materials. The results from the computer simulation are in good agreement with the experimental one. Through these results, such items as stress distribution, temperature profiles, thermal expansion and weld nugget formation are predicted. Reliability and applicability of finite element models have been demonstrated to simulate and to analyze the resistance spot welding process.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.263-272
• /
• 2003

여러 가지 형식의 지오신세틱스가 개발되고 있는데, 설계 수명에 대한 신뢰성, 화학적 생물학적 내구성, 그리고 천공(꿰뚫림)에 대한 저항성 등에 대한 문제가 있는데도 불구하고 이들의 적용 분야는 증가 추세에 있다. 토공구조물이나 차수구조물에서 천공(꿰뚫림) 저항에 대한 문제는 해결되어야 할 중요한 문제로 드러나고 있다. 본 연구에서는 차수구조에 사용되는 여러 가지의 지오신세틱스의 천공(꿰뚫림) 저항성에 대하여 모형실험을 통하여 비교 분석하였다. 지오신세틱스에 천공(꿰뚫림)을 발생시키는 기구로서 두 가지 형식의 기구와 강자갈 그리고 쇄석을 사용하였다. 연구결과에 따르면, 천공기구의 형태는 재료의 천공(꿰뚫림)저항성에 큰 영향을 끼치고, 천공(꿰뚫림)강도의 크기는 천공(필뚫림) 발생기구의 형태와 재료에 따라 불규칙적인 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1358-1366
• /
• 2006

In order to study the effects of shell contents on the liquefaction resistance of the shelly sand, NGI cyclic simple shear tests were performed for the shelly sands with shell contents of 0%, 5%, 10%, 20% and 30% under the effective vertical stress of 50kPa, 100kPa and 150kPa for 40% and 55% of relative density, respectively. Cyclic simple shear test results showed that for the low effective vertical stress, liquefaction resistance increased rapidly with the increase of shell contents in both 40% and 55% relative density. On the other hand, for the high effective vertical stress, the liquefaction resistance increased slightly in 40% relative density whereas the resistance was almost same in 55% relative density. Liquefaction resistance decreased with increasing effective vertical stress for both 40% and 55% relative density. In the same effective vertical stress and shell contents, liquefaction resistance increased with the increase of relative density of sands.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.349-349
• /
• 2010

Great performance of many semiconductor devices requirs the use of low-resistance ohmic contact. Typically, transmission line method (TLM) patterns are used to measure the specific contact resistance between silicon and metal. In this works, we investigate contact resistance for metal dependent (Cr/Ag, Ni) using TLM pattern based on silicon-on-insulator (SOI) wafer. The electrode with Ni linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in accumulation part, but non-linearly increase in inversion part. In additional, the electrode with Cr/Ag linearly increases contact resistance as the pattern distance increase from $15{\mu}m$ to $75{\mu}m$ in inversion part, but non-linearly increase in accumulation part.

• Human Ecology Research
• /
• 제58권3호
• /
• pp.401-416
• /
• 2020

Service providers have introduced interactive devices such as self-service kiosks to provide convenient and efficient services to consumers. Self-service kiosks are one of the most diverse technological forms of self-service technologies that provide control and freedom to consumers as well as reduce the frustration of line-ups. This study explores the predictors of consumer resistance and continued use intention with regard to self-service kiosks. It adopts three constructs on the following variables: perceived innovation characteristics, consumer characteristics, and gamification. An online self-administered survey was conducted, and 343 users of self-service kiosk services, aged between 20 and 59, were included in the analysis. The study used the SPSS 23.0 program to perform a descriptive analysis along with, t-test, ANOVA, correlation analysis, and regression analysis. First, convenience, controllability, and gamification negatively influenced consumer resistance to self-service kiosks. Second, human alienation and sociability positively influenced consumer resistance to self-service kiosks. Third, convenience and gamification positively influenced the continued use intention with regard to self-service kiosks. Last, the risk of functionality, human alienation, and sociability negatively influenced continued use intention with regard to self-service kiosks. The results contribute to the literature because few studies have examined what drives the resistance of users and continued use intention with regard to self-service kiosks. It also provides service providers and practitioners with insights and strategies on how to overcome consumer resistance.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.879-888
• /
• 2018

Probability-based design codes have been developed to sufficiently confirm the safety level of structures. One of the most acceptable probability-based approaches is Load Resistance Factor Design (LRFD), which measures the safety level of the structures in terms of the reliability index. The main contribution of this paper is to calibrate the load and resistance factors of the design code for tunnels. The load and resistance factors are calculated using the available statistical models and probability-based procedures. The major steps include selection of representative structures, consideration of the limit state functions, calculation of reliability for the selected structures, selection of the target reliability index and calculation of load factors and resistance factors. The load and resistance models are reviewed. Statistical models of resistance (load carrying capacity) are summarized for strength limit state in bending, shear and compression. The reliability indices are calculated for several segments of a selected circular tunnel designed according to the tunnel manual report (Tunnel Manual). The novelty of this paper is the selection of the target reliability. In doing so, the uniform spectrum of reliability indices is proposed based on the probability paper. The final recommendation is proposed based on the closeness to the target reliability index.

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.153-163
• /
• 1997

본 논문은 규사 분말을 치환한 모르터의 내화학성에 관한 실험적 연구이다. 모르터 시험체에 대하여 모르터의 내화학성능 개선용 혼화재로서 규사 분말의 활용성 및 콘크리트 시험체의 내화학적 특성에 관한 예측 모델로서의 모르터 모델의사용 가능성 등을 검토하였다. 그결과 다음과 같은 결론을 얻을 수 있었다. 모르터 모델의 콘크리트 내화학성 예측 모델로서 사용 가능성 검토 결과, 혼화재의 종류 및 치환량에 따른 내화학성 실험 결과가 콘크리트의 실험 결과와 유사하게 나타나므로 콘크리트 시험체의 내화학성 예측 모델로서 활용이 가능하리라 사료된다.

• 복식
• /
• 제58권6호
• /
• pp.24-34
• /
• 2008

The purpose of this study was to create a database of information on fabric factors(i.e., fabric insulation, fabric weight, clothing weight, fabric thickness, air permeability, and water vapor resistance) of clothing used for insulations, to compare them according to clothing types, and to estimate thermal resistance of clothing using these factors. A total of 25 kinds of clothing were selected(9 types for suits, 6 types of jacket, 5 types for shirts, and 5 types for trousers). The results of this study were as follows; Thermal insulation of clothing showed the highest positive correlation(0.85, p>0.01) with thermal insulation of fabric and very high positive correlation with water vapor resistance, fabric thickness, fabric weight, and clothing weight, respectively, 0.77, 0.77, 0.73, 0.71(p>0.01). Fabric weight of jacket was higher than that of shirts and trousers. Air permeability of shirts was the highest of clothing types. Clothing insulation of jacket was higher than that of shirts and trousers and its fabric insulation was also the highest of clothing types. Regression analysis showed that fabric thickness, water vapor resistance, and fabric weight would be useful factors for estimating the thermal resistance of clothing.

• 한국작물학회지
• /
• 제47권4호
• /
• pp.319-322
• /
• 2002

Soybean cyst nematode (Heterodera glycines Ichinohe; SCN) is an important soybean pest and the use of resistant cultivars is the effective method to reduce or eliminate SCN damage. However, breeding for SCN resistance is difficult and expensive by the oligogenic nature of the resistance and genetic variability in the pathogen. Fortunately, SCN resistance loci, rhg1 and Rhg4 are generally accepted as a necessity for the development of resistant genotypes using any source of resistance. In this study, resistance of 44 Korean soybean cultivars to SCN was tested using two molecular markers. Seonheukkong and Pokwangkong were the homozygous to rhg1 locus. Seven cultivars were susceptible to SCN based on Satt309 marker linked rhg1 locus. All Korean cultivars estimated in this study were recessive homozygous to Rhg4 locus and were susceptible in the PCR reaction using primer 548/563 linked to the Rhg4 locus conferring resistance to SCN race 3. Among 44 cultivars estimated, seven cultivars were susceptible to SCN in both Satt309 and primer 548/563 markers. Based on both Satt309 and primer 548/563 markers, there is no resistant cultivar to SCN in Korea. Therefore, SCN resistant cultivars need to be developed in the future. These two markers can be used for improving SCN resistant cultivars.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.27-35
• /
• 2009

주요 철골구조체는 일정한 시간동안 내화성능을 발휘하기 위한 내화조치를 필요로 한다. 본 연구는 철골기둥의 내화피복 국내인정 제품의 내화성능을 분석 평가함을 목적으로 한다. 대상제품은 보드피복과 뿜칠피복 두 종류의 제품을 대상으로 하여 샘플연구를 하였다. 국내기준과 유럽기준에 기초하여 제품의 내화성능을 분석하였다. 또한 국내기준을 유럽기준의 성능설계관점에서 분석 고찰하였다. 온도적 측면에서 국내기준의 내화성능은 일반적으로 안전하다고 사료되지만, 재료의 물성치 자료확충, 강재온도 산정방법, 프로필계수, 화재시 내력검증 등의 특성을 반영할 필요가 있다고 사료된다.