• 한국추진공학회지
• /
• 제21권4호
• /
• pp.89-95
• /
• 2017

본 논문에서 극저온 추진제를 사용하는 액체추진기관의 재순환예냉 시스템 설계의 유연성을 확보하기 위한 연소기 산화제 개폐밸브 재순환예냉 유로의 유량계수 개선 내용을 소개하였다. 밸브의 재순환 예냉 출구 포트 크기와 밸브 내부 유로 형상 변경에 의한 재순환예냉 유로의 유량계수 값을 예측하기 위해서 기존 밸브에서 측정한 재순환예냉 유로의 유량계수 값들을 활용하였으며, 액체질소를 운용유체로 사용하여 측정한 유량계수와 예측값과의 비교를 통해 밸브 내부 형상 변경에 의한 유량계수 개선정도를 확인하였다. 연소기 산화제 개폐밸브의 재순환예냉 유로의 유량계수는 기존 밸브에 비해 2배가량 향상되었으며, 결과적으로 연소기 산화제 개폐밸브에 할당되었던 설계 요구 차압의 75%가량을 재순환예냉 시스템에서 추가적으로 소요될 수 있는 잠재적인 차압과 재순환예냉 시스템의 다른 구성품의 추가 차압으로 활용될 수 있을 것으로 기대된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.279-282
• /
• 2011

가스 발생기 산화제 개폐 밸브에 사용되는 벨로우즈의 구조 해석 및 시험이 수행되었다. 해석은 상온 및 극저온에서 EJMA (Expansion Joint Manufacturing Association) 표준 및 상용 유한 요소 해석프로그램인 Abaqus v6.9를 이용하여 수행되었다. 스프링 강성, 응력 및 피로 수명 해석 결과들이 비교되었고 유한 요소 해석 결과에서 접촉 및 재질의 소성에 의한 영향을 살펴보았다.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.113-120
• /
• 2018

The one-way gas valve developed in this study was designed to prevent the breakage of packages from increased internal pressure, which is a problem in packaged Kimchi, and simultaneously reduce the outflow of the offodor release. The effect of the one-way gas valve on the headspace atmospheric compositions was investigated in the packaging system. The changes of atmospheric compositions and quality factors of Kimchi, such as $CO_2$ accumulation, pH, titratable acidity, and salinity, were measured during a 4-week storage period at $4^{\circ}C$. The Kimchi package with the one-way gas valve dramatically reduced pressure build-up in the pouch by allowing the controlled flow of gas to the atmosphere. In addition, the package design allows the possibility of controlling the gas generated from Kimchi by adjusting the viscosity of the open pressure control oil. The one-way gas valve did not affect the sensory characteristics of Kimchi products during the storage period. Furthermore, the deodorizing capability of the activated carbon contained in the one-way gas valve effectively reduced the off-odor of Kimchi products released along with carbon dioxide. The novel one-way gas valve is considered to be an active packaging system that can solve major problems of expansion and off-odor leakage in the packaging of Kimchi.

• Journal of Chest Surgery
• /
• 제11권3호
• /
• pp.303-315
• /
• 1978

During the full 10-year period from June 1968 through June 1978, 112 consecutive patients underwent isolated or double valve replacement. A total of 130 valves were used in aortic, mitral or tricuspid positions: 63 prosthetic valves in 56 and 67 glutaraldehyde-preserved porcine aortic valves in 56 patients. There were 31 early and 9 late deaths with a cumulative mortality rate of 35.7 percent. Eighty-five patients survived longer than 10 days postoperatively were studied for the occurrence of thromboembolism and complications related to anticoagulant therapy. At the end of follow-up period, 68 patients were on Coumadin; 74 were on Persantin with or without Coumadin; 11 were off any antithrombotic drugs with 6 of them being off electively after 6 months of tissue valve replacement. Thromboembolism occurred in 7 [8.2%] of 85 patients or 10.9%/patient-year. Embolic rates were as follows: one of 18 patients anticoagulated [5.6%] or 6.1%/patient-year and 4 of 16 patients not anticoagulated [25.0%] or 17.8%/patient-year for the prosthetic valve replacement; and one of 40 patients anticoagulated [2.5%] or 7.9%/patient-year and one of 11 patients not anticoagulated [9.1%] or 7.9%/patient-year for tissue valve replacement. Three complications of major bleeding were experienced by 3 patients during the follow-up period, being related to Coumadin therapy. The importance of proper anticoagulation were stressed for the successful management of patients after cardiac valve replacement, both prosthetic and tissue valves.

• 한국정보전자통신기술학회논문지
• /
• 제12권6호
• /
• pp.582-590
• /
• 2019

우리나라는 저출산·고령화가 진행함에 따라 전체 인구의 14%를 웃도는 고령사회에 진입함으로써 1인 세대의 증가라는 사회변화에 직면해 있다. 고령사회에서 1인 세대 증가로 인한 가스화재 사고를 예방할 수 있는 효과적인 방법은 컨트롤 밸브를 설치하여 설정시간이 지나면 강제적으로 가스를 차단하는 방법이다. 본 연구에서는 밸브 핸들을 돌리지 않고 택트 스위치를 눌러 모터를 이용하여 웜기어와 헬리컬 기어로 동력을 전달하여 밸브를 좌우 회전하여 개폐 할 수 있게 개발하였고, 컨트롤러와 탈부착이 쉽게 전용 밸브를 개발함으로써 조립 및 검사가 용이하고, 부품 수 및 제품 사이즈를 줄여 원가 절감을 통해 경쟁력을 강화할 수 있도록 개발하였다. 또한 내구성 시험을 통해 12초에 한 번씩 ON/OFF 반복하여 34시간 동안 10,000번을 수행하는 동안 안정적으로 동작 할 수 있도록하여 9년 이상을 사용할 수 있도록 개발하였다. 개발 방법은 Solid works와 Altium Designer 툴을 활용하여 기구 및 PCB 설계를 진행하였고, Firmware 개발은 IAR Embedded Workbench 환경에서 개발하였다.

• 한국유체기계학회 논문집
• /
• 제13권4호
• /
• pp.11-17
• /
• 2010

The developed control valves, installed on the hot water distribution manifolds for the floor heating system, consist of the balancing valves and the shut-off valves. The balancing valve was designed to improve the flow control performance and to reduce the noise emitted from the valve by modification of the general V port. The port of the shut-off valve was designed with two ceramic plates, working by rotating upper plate, to improve the duration and to reduce the noise. For the evaluation of the new valves, the flow rate was measured and noise level test was carried out. The test results showed that the error of the flow rate accuracy test for the flow balance of each manifold circuit was less than ${\pm}3%$ and the noise level was less than 35 dB(A).

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.923-930
• /
• 2008

The butterfly valve is widely used in the industrial field as an on-off or a flow control valve. When the butterfly valve is used as a flow control valve. cavitation sometimes occurs in the range of high flow rate because of the small valve opening. Therefore. the pressure loss and the cavitation characteristics are investigated by use of a commercial CFD code. The results show that the possibility of cavitation occurrence in the cryogenic butterfly valve is very high in the case of valve opening angle below 10 degree and incident velocity over 6m/s. By increasing the inlet velocity at 10 degree of valve opening angle. the value of loss coefficient increased. However. by increasing the inlet velocity at 50 degree of valve opening angle. the value of loss coefficient decreased.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.41-46
• /
• 2007

Butterfly valves are commonly used as control valves in applications where the pressure drops required of the valves relatively low. As the shutoff valve (on/off service) or throttling valves (for flow or pressure control), the higher order and the better precision of butterfly valves are required. The it's more and more essential to know the flow characteristic around the valve. Due to the fast progress of the flow visualization and numerical technique, it becomes possible to observe the flows around a valve and to estimate the performance of a valve. Researching these results did not gave only access to understand the process of the valve flows at different valve opening angles, but also was made to determine the accuracy of the employed method. Furthermore, the results of the three-dimensional analysis can be used in the design of butterfly valve in the industry.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.294-298
• /
• 2001

Satellite propulsion system is employed for orbit transfer, orbit correction, and attitude control. The monopropellant feeding system in the low-earth-orbit satellite blowdowns fuel to the thrust chamber. The thrust produced by the thruster depends on fuel amount flowed into the combustion chamber. If the thruster valve be given on-off signal from on-board commander in the satellite, valve will be opened or closed. When the thrusters fire fuel flows through opened thruster valve. Instantaneous stoppage of flow in according to valve actuation produces transient pressure due to pressure wave. This paper describes transient pressure predictions of the KOMPSAT2 propulsion system resulting from latching valve and thrust control valve operations. The time-dependent set of the fluid mass and momentum equations are calculated by Method of Characteristics (MOC).

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.102-113
• /
• 1996

An experimental and theoretical study on a pneumatic servo system has been conducted using on-off valves and a pneumatic cylinder. A V/I converter has been designed for rapid rising and falling of the solenoid current, which significantly improves the positioning accuracy and settling time of the servo system by shortening the valve opening time. Pulse width modulation was modified to operate on-off valves effectively. A state feedback controller which feeds back position, velocity and acceleration is used to control the system. The influence of controller gains on the system performance is studied to develop a scheme that automatically adjusts the gains using fuzzy logic theory. It is shown experimentally that the proposed fuzzy logic tuner works satisfactorily. A new method for measurements of valve effective areas is proposed, and a partially polytropic model is applied to simulation of the pneumatic system. Simulated results show good agreement with experimental data.