• Tribology and Lubricants
• /
• v.9 no.1
• /
• pp.45-54
• /
• 1993

The lubrication characteristics of line contacts between the vane and cam ring in an oil hydraulic vane pump with intravanes have been investigated. Variations of the radial acting force of a vane were calculated from previously measured results of dynamic internal pressures in four chambers surrounding a vane, and variations of the film thickness were estimated in both the rotational speed range from 500 to 1500 rpm and in the delivery pressure range from 1 to 14 MPa. The results indicate the variations of the radial acting force and film thickness. It is found that the regimes of lubrication in the vane tip contacts lover rigid-isoviscous to rigidvariable viscosities.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.83-84
• /
• 1957

I have studied on the Enzymes of rice bran during preservation heating at various periods at constant temperatures and under atmospheric pressure. I found following facts through experiments. 1. It increases A. V. ratio of rice bran oil at above 120$^{\circ}C$., but it does not effect on its fat by heating. 2. It increases A. V. ratio of rice bran oil rapidly at below 90$^{\circ}C$., while it does not effect on its fat during preservation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.305-308
• /
• 1996

An analyzing method for pressure fluctuation in oil hydraulic pipe network was developed in this study. The object pipe network has multi-branch configuration, and the pipeline of it is composed of steel tubes, flexible hoses. Also, accumulators, orifices and lumped oil volume components are attached on it. Transfer matrix method, in other words impedance method, was used for the analysis. The reliablity and usefulness of the analyzing method was confirmed by comparing and investigating computed results and experimental results got in this study.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.72-74
• /
• 1998

The adaptive skill of the human operator is now being simulated and reproduced by computer that have become more powerful and less expensive. This paper is concerned with an investigation of the effects of dynamic load of hydraulic oil on pressures with three different circuit(meter-in, meter-out and bleed-off). The experimental results showed that pressures increase with an increase in dynamic load in bleed-off circuit, but there is no variation of pressure in meter-in and meter-out circuits.

• Journal of Chest Surgery
• /
• v.26 no.2
• /
• pp.71-74
• /
• 1993

For Percutaneous control of the degree of constriction after pulmonary artery banding, we developed an adjustable banding device that was operated by oil pressure. This consists of a stainless steel snare, a polyethylene tube with silicone oil, and a screw adjuster. Five dogs underwent banding of the pulmonary artery or the descending aorta with this device. This band could be effectively and finely adjusted. Although these studies are preliminary, they suggest that a reversible pulmonary artery band can be performed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.495-497
• /
• 1999

In order to determine what influences the interfacial breakdown in EPDM/XLPE laminates, We made the breakdown test ceil and this was pressure controllable breakdown test cell. We make the needle electrode (tip radius: about 10 micrometer) using electrochemical method. We studied the interfacial silicone oil was higher than that with silicone grease. As a function of heat treatment time in a vacuum, interfacial breakdown strength increased much in XLPE/EPDM laminates pasted with silicone grease but increased a little in that with silicone oil.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.5
• /
• pp.199-201
• /
• 1984

It has been found that $Rh(ClO_4)(CO)(P(C_6H_5)_3)_2$ catalyzes the hydrogenation and isomerization of soybean oil at room temperature under the atmospheric pressure of hydrogen. The hydrogenation occurs at the olefinic groups to produce saturated groups leaving the ester groups intact, and the isomerization converts $-CH = CH- CH_2-CH = CH-$ units to conjugated dienes and the dienes separated by more than two $-CH_2-$ groups. The rate of the hydrogenation is faster than that of the isomerization.

• Carbon letters
• /
• v.25
• /
• pp.95-102
• /
• 2018

We examined the pressure effects on petroleum pitch synthesis by using open and closed reaction systems. The pressure effects that occur during the pitch synthesis were investigated in three pressure systems: a closed system of high pressure and two open systems under either an atmosphere or vacuum. A thermal reaction in the closed system led to the high product yield of a pitch by suppressing the release of light components in pyrolysis fuel oil. Atmospheric treatment mainly enhanced the polymerization degree of the pitch via condensation and a polymerization reaction. Vacuum treatment results in a softening point increase due to the removal of components with low molecular weights. To utilize such characteristic effects of system pressure during pitch preparations, we proposed a method for synthesizing cost-competitive pitch precursors for carbon materials. The first step is to increase product yield by using a closed system; the second step is to increase the degree of polymerization toward the desired molecular distribution, followed by the use of vacuum treatment to adjust softening points. Thus, we obtained an experimental quinoline insolubles-free pitch of product yield over 45% with softening points of approximately $130^{\circ}C$. The proposed method shows the possibility to prepare cost-competitive pitch precursors for carbon materials by enhancing product yield and other properties.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.189-193
• /
• 2008

In this study, the effect of reaction conditions on the transesterification of soybean oil and methanol was investigated in a high-pressure-fixed-bed-reactor-system with zinc aluminate catalysts. Without catalysts, high-pressure-reaction at $300^{\circ}C$ and 1,200 psi brought 19% yields of methyl esters, which was caused by the approach of reaction condition to supercritical point of methanol. However, except the specific reaction condition, the yields in the reaction with no catalyst were very low below 4.5%. The zinc aluminate was prepared as catalyst by coprecipitation and characterized with $N_2$ gas adsorption/desorption and X-ray diffraction. With catalyst, the effect of the reaction parameters such as temperature, pressure, and molar ratio of reactants on biodiesel production was demonstrated. The higher temperature, pressure, and methanol molar ratio to soybean oil, the more yields of methyl esters. It was proved that among the reaction parameters, the reaction temperature be the most influential variable on methyl ester yields.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.11a
• /
• pp.77-82
• /
• 2001