• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.343-347
• /
• 2013

BACKGROUND: Control of alternate bearing satsuma mandarin in Jeju is very important to maintain the optimum price of fruit and get the sustainable income of farmers. Unlike orange, Satsuma mandarin is well known to sensitive on alternate bearing. We carried out the experiment to know the effect of foliar application of $GA_3$ on the flowering and fruit quality of satsuma mandarin (C. unshiu Marc. cv. Miyagawa). METHODS AND RESULTS: To experiment, the treatments consist of control, different concentration of $GA_3$ (25, 50 and 100 mg/L), machine oil emulsion 100 times and mixture of various concentration of $GA_3$ (25 and 50 mg/L) with machine oil emulsion 100 times which it was applied on 15 year-old Miyagawa satsuma mandarin at December 29, 2011. Foliar application of $GA_3$ in winter reduced the flowering of satsuma mandarin. Flower-leaf ratio was significantly reduced at 100 mg/L $GA_3$, while no differences observed in low concentration of $GA_3$ (25 and 50 mg/L). However, it was significantly decreased to 0.19 in application of $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixture. Number of leaves per fruit was significantly increased as foliar application of $GA_3$ also it reduced the fruits remarkably. Soluble solid contents and Hunter's a of peel color ratio showed no difference among $GA_3$ single treatments, but it was reduced in $GA_3$ 25 and 50 mg/L with machine oil emulsion 100 times mixtures significantly. From the results, it has been found that higher $GA_3$ concentration can reduce the number of flowers on the alternate bearing of satsuma mandarin. However, it was found that lower concentration of $GA_3$ with machine oil emulsion mixture 100 times can reduce flowering. CONCLUSION(S): The foliar application of $GA_3$ (100 mg/L) can alleviate alternate beraring. Also, mixture of lower concentration of $GA_3$ with machine oil emulsion 100 times can retard flowering more significantly while it needs further confirmation.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2010

Purpose : To investigate the effects of the lavender, lemon and eucalyptus oil mixture on the atopy dermatitis skin lesions induced on NC/Nga Mice by dinitrochlorobenzene (DNCB). Material and Method : For this purpose, we fabricated the oil mixture blending three essential oils (lavender, lemon, eucalyptus : ELL) with one carrier oil (jojoba) and apply it on the atopic dermatitis skin lesions of NC/Nga Mice. Atopic dermatitis in NC/Nga Mice was induced by DNCB treatment on the dorsal skin of mice for 8 weeks. The mixture of ratio of each essential oil drop was 1 (eucalyptus) : 2 (lemon) : 2 (lavender) and this mixture was blended with jojoba oil 50ml (0.025%). The ELL-ointment was supplied for 8 weeks. We evaluated the effects of ELL on cell viability of mouse lung fibroblast, clinical skin features and severity, the level of serum Immunoglobulin (Ig) E & Ig G1, Interleukin (IL)-4, IL-13 and Interferon (IFN)-$\gamma$. Results : ELL showed safety on the cell viability of mouse lung fibroblast compared with control group. The cell viability was measured by SRB method. The effects of ELL on clinical skin features and severity in DNCB-induced dermatitis model of NC/Nga mice was significant compared with control group. EEL also showed significant effects on clinical symptom score compared with control group. Serum IgE & IgG1 level and development of atopy dermatitis skin lesions were evaluated. Serum IgE & IgG1 production was significantly down-regulated in EEL group compared with control group. ELL also down-regulated the levels of IL-4 and IL-13, and up-regulated the level of IFN-$\gamma$ compared with control group significantly. Conclusion : ELL was effective on atopy dermatitis by modulating Th2 related factors.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.35-44
• /
• 2006

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure, then the friction and load of journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.207-218
• /
• 2007

Turbocharger bearings are under the circumstance of high temperature, moreover rotated at high speed. It is necessary to be designed overcoming the high temperature. So the type of oil inlet port, the inlet oil temperature and the sort of engine oil should be designed, controlled and selected carefully in order to reduce the bearing inside temperature. In this study, the influence of aerated oil on a high-speed journal bearing is also examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil inlet port's type, oil aeration level and shaft speed. It is found that the type of oil inlet ports and shaft speed play important roles in determining the temperature and pressure distribution, then the friction in a journal bearing at high speed operation. Also, the results show that, under extremely high shaft speed, the high shear effects on aerated oil and the high temperature effects are canceled out each other. So, the bearing load and friction show almost no difference between the aerated oil and pure oil.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.111-112
• /
• 2002

The influence of aerated oil on a high-speed proceeding bearing is examined by using the classical thermohydrodynamic lubrication theory coupled with analytical models for viscosity and density of air-oil mixture in fluid-film bearing including the live surface tension of aerated oil. Convection to the walls and mixing with supply oil and re-circulating oil are considered. The considered parameters for the study of bubbly lubrication are oil aeration level, air bubble size and shaft speed. The results show that, if the live surface tension is considered, the effect of air bubbles on the bearing load capacity is reduced due to temperature engagement comparing with that under the condition of a constant surface tension.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1984.12a
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.2
• /
• pp.31-39
• /
• 1997

Between 40,000 and 60,000 liters of light oil were spilled when an underground pipe broke at a newly constructed landfill site in coastal area, Korea. Methods were presented to examine the subsurface distribution of the contaminants in hydrocarbon-contaminated soil. As results, large quantities of oil and grease were found to have migrated horizontally at the site. Oil and grease plume at concentrations of 38-88 mg/kg was formed horizontally through silty sand with gravel fill and the vertical movement of the contaminants was thought to be limited to groundwater level between 2 and 4 m corresponding to sea water level. Right after finding the leakage area, the early action of excavation and pumping out the mixture of groundwater and oil was taken and it was proved to be very effective for preventing further contamination. Two months after the leakage, oil and grease in sea water sample near contaminated area was not detectable.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.1-5
• /
• 2001

A study on the new active type oil-water separation system including the oil-water separation system of magnetic film was carried out. Separation system is composed of several active types of circulating oil separation steps and one magnetic film separation step at final stage. At the magnetic separation step, ferrofluid easily forms a weak magnetic mixture with oil, which is from the water by magnetic field gradient. The vessel has been designed to run at the maximum speed of 25 knots. And two typical forms of SWATH and Catamaran have been studied as a new type of oil recovery vessel.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.20-24
• /
• 1995

When the slurry of water and coal which is produced from hydraulic coal mining was dehydrated by COM(Coal Oil Mixtue), the effects of flocculant were measured by light transmittance of supernatant liquid, The experimental results obtamed m this study are summarized as follows; The efficient flocculant is anionic flocculant(AllO), and in this case, the required concentration is about l00g/t. When diesel oil is used with flocculant, COM is formed in lower impeller speed than when only diesel oil is used. The amout of diesel oil required to form COM is 10% of that of coal.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.