• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.156-163
• /
• 2007

This study was conducted to evaluate the liquefying efficiency of mixed organic fertilizer in different conditions. The organic fertilizer was composed of sesame oil cake, rice bran, fish meal, ground bone meal etc, and made by fermenting process. It included $23g\;kg^{-1}$, $17.0g\;kg^{-1}$, $23.9g\;kg^{-1}$, $290g\;kg^{-1}$ of N, $P_2O_5$, $K_2O$, organic matter, respectively. In one test, the mixed organic fertilizer was added in the proportion of 10% to water 90% and aerated continuously, for 2, 8 hours per day, and not aerated as control. In the other test, ratios of organic fertilizer to water were 5%, 10%, 20% and aerated for 2 hours a day. With the increase of liquefying time, pH, EC and $NH_4-N$ increased without relation to aeration time. After 10 days, liquid organic fertilizer aerated for 2 hours a day contained $634mg\;N\;kg^{-1}$, $68.1mg\;P_2O_5\;kg^{-1}$, $453mg\;K_2O\;kg^{-1}$, which was not significantly different from 8 hours a day or continuous aeration. Then extraction ratios of inorganic contents were 27.6%, 4.0% and 18.9%, respectively. Continuous aeration resulted in increasing the viable number of aerobic bacteria, spore forming bacteria and fungi in liquefied solution. Higher ratio of organic fertilizer to water increased EC, $NH_4-N$ and other inorganic matter contents, but decreased extraction ratio of nutrients in liquid fertilizer. The liquid organic fertilizer of 20% contained $1,140mg\;N\;kg^{-1}$, $35.4mg\;P_2O_5\;kg^{-1}$, $544mg\;K_2O\;kg^{-1}$ after 10 days. Then extraction ratios were 24.8%, 2.4% and 13.6%, respectively. The ratio of organic fertilizer to water was positively correlated with only spore forming bacteria, Pseudomonas spp. among microorganisms.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1143-1148
• /
• 2010

We investigated the separation of nitrogen heterocyclic compound (NHC) contained in a model coal tar fraction comprising four kinds of NHC [indole (In), quinoline (Q), iso-quinoline (iQ), quinaldine (Qu)], three kinds of bicyclic aromatic compound (BAC) [1-methylnaphthalene (1MN), 2-methylnaphthalene (2MN), dimethylnaphthalene (DMN) mixture with ten structural isomers (DMNs; regarded as one component)], biphenyl (Bp) and phenyl ether (Pe) by liquid membrane permeation (LMP). A batch-stirred tank was used as the permeation unit. An aqueous solution of saponin and n-hexane were used as the liquid membrane and the outer oil phase, respectively. Yield and selectivity of individual NHC was much larger than that of BAC, Bp and Pe. Increasing the initial mass fraction of the saponin to the membrane solution ($C_{sap,0}$) and the initial volume fraction of O/W emulsion to total liquid in a stirred tank (${\phi}_{OW,0}$) resulted in deteriorating the yield of individual NHC, but increasing the stirring speed (N) resulted in improving the yield of each NHC. With increasing $C_{sap,0}$, the selectivity of each NHC based on DMNs increased. Increasing ${\phi}_{OW,0}$ and N resulted in decreasing the selectivity of individual NHC based on DMNs. At an experimental condition fixed, the sequence of the yield and selectivity in reference to DMNs for each NHC was Q > Qu = iQ > In. Furthermore, we compared LPM method with methanol extraction method in view of the separation efficiency (yield, selectivity) of NHC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.785-790
• /
• 2000

The effect of formaldehyde treatment of solvent and mechanical extracted cottonseed meal on the performance, digestibility and nitrogen balance was assessed in lambs. Four total mixed rations viz., A, B, C and D containing 40% untreated and treated solvent and mechanical extracted meal were prepared. Sixteen male lambs with average BW of 20-22 kg were randomly allocated to experimental rations and were fed individually during ninety days growth trial. The treatment of solvent extracted cottonseed meal resulted in a linear decrease in ruminal protein degradation. Maximum decrease (64%) in protein degradation was observed at 4 h incubation time with 0.3% formaldehyde treatment. Highest daily BW gain was observed in lambs fed on rations Band D compared to lambs fed on rations A and C. Daily BW gain was higher on rations having 0.3% for fromaldehyde treated cottonseed meals. Higher DM digestibility was observed on ration D compared to other rations. Higher (p<0.05) CP and CF digestibility was observed on rations Band D compared to rations A and C. Nitrogen retention as % age of nitrogen intake was (p<0.05) higher for lambs fed rations B and D compared to rations A and C. Similar pattern was observed for nitrogen retention as percent of nitrogen absorbed. The present study suggested that oil extraction methods of cottonseed did not alter their meal utilization in lambs, however, formaldehyde (0.3%) treatment of meals enhanced its efficiency for growth, digestibility and nitrogen balance in lambs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.250.1-250.1
• /
• 2010

최근 석유공급 불안정성과 이산화탄소 배출 규제 움직임에 대응하기 위한 수단으로 바이오연료의 공급이 전세계적으로 증가하고 있다. 이와 같은 바이오디젤의 보급 활성화는 식물성 기름의 가격 상승과 수급 불안정 문제, 그리고 식량자원과의 충돌 문제를 야기하고 있다. 국내 바이오디젤 생산 원료로 사용되는 대두, 유채, 해바라기, 팜 등은 모두 식용시장과 수급 균형을 형성하고 있어 바이오디젤의 생산이 증가하게 되면 식용 오일 시장의 수급균형이 깨져 오일곡물 가격의 변동을 초래하게 될 것이다. 과거에는 수거비용을 들여 폐기하던 폐식용유 마저 이제는 돈을 주고 구입해야하는 실정에 다다랐다. 바이오디젤 생산비의 70~80%를 차지하는 원료유의 부족 현상에 따라 바이오디젤 업계에서는 soapstock, trapped grease, 폐식용유 등의 저급유지 활용 방안을 강구하고 있으며 자트로파와 같은 비식용 작물의 해외플랜테이션도 진행하고 있다. 본 연구에서는 커피찌거기에 남아 있는 오일을 속슬렛추출장치를 이용해 추출하고 전이에스테르화 반응을 수행하여 반응 특성과 커피오일 바이오디젤의 지방산 조성을 알아보고 바이오디젤 원료유로서의 사용가능성에 대해 알아보았다. 석유에테르를 용매로 속슬렛 추출장치를 이용해 추출시 원료대비 약 17%(w/w)의 오일을 추출할 수 있었다. 추출된 오일의 산가는 18.79mgKOH/g으로 매우 높아 직접 전이에스테르화 반응이 불가능하다. 고체 산 촉매 하에서 전처리 반응을 실시하여 유리지방산을 전환 제거한 후 염기촉매를 이용해 전이에스테르화 반응을 진행한 결과 약 80%의 바이오디젤(FAME) 함량을 얻을 수 있었다. 지방산 조성 분석 결과 리놀레익산(Linoleic acid, C18:2), 올레익산(Oleic acid, C18:1), 팔미틱산(Palmitic acid, C16:0)이 대부분을 차지하며 이 중에서도 리놀레익산이 44.17%로 가장 많은 함량을 보였다. 이는 커피찌꺼기 추출 오일이 바이오디젤 원료유로 활용 가능성을 나타내는 결과로, 색소성분 등의 불순물을 효율적으로 제거하여 증류정제 전단계에서의 바이오디젤 순도와 생산 수율을 증대시키기 위한 추가 연구가 필요한 것으로 판단된다.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.761-768
• /
• 2016

Recently, swine production costs have increased due to increased feed cost, especially the price of corn and soybean meals. Soybean meal is traditionally an expensive ingredient, but the price of corn has dramatically increased because of increased biofuel production. This change has resulted in the swine industry looking for alternatives in order to reduce feed cost, resulting in decreased production costs. Thus, various alternatives have been used as feed ingredients to replace corn, soybean meal, or other expensive ingredients. One othercandidate may be palm kernel co-products that are a by-product of oil extraction from palm fruits. Palm kernel co-products have not been used in swine diets due to high fiber content and imbalanced amino acids compared with corn and soybean meal. However, recent studies showed that palm kernel co-products did not have any negative effects on growth performance of pigs when they replaced some proportions of corn and soybean meal. In addition, palm kernel co-products may provide some physiological properties to pigs by modifying gut microbiota and/or immunity of pigs, resulting in improvement of growth and health of pigs. Therefore, the value of palm kernel co-products were reviewed as one of the alternatives for corn, soybean meal, or other major ingredients in swine diets.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.1
• /
• pp.15-23
• /
• 2016

The effects of austenitizing temperature and cooling rate on precipitation behavior and tensile properties were investigated in an Mn-Mo-Nb-V pressure vessel steel. During austenitizing, it was shown that the austenite coarsening was somewhat suppressed by undissolved NbC. After cooling from austenitizing, the microstructure of all the steels mainly consisted of upper bainite. However, the steel comprised a little lower bainite and martensite in the case of aqua oil quenching from $1000^{\circ}C$, which would be due to increased hardenability by partly dissolved Nb and comparatively large austenite grains. The average size of NbC in austenite at higher temperature was analyzed to be smaller than that at lower temperature because of the more dissolution. It was found that the NbC did not grow much during fast cooling from austenitizing. Meanwhile, the NbC grew much during slow cooling, probably due to wide temperature range of cooling and sufficiently long time for NbC to grow. It was conjectured the V precipitates newly formed and/or grew during cooling from austenitizing and during tempering. On the other hand, the formation of NbC was almost completed before tempering and little more precipitated during tempering. Among the tempered steels, the steel which was fast cooled from $1000^{\circ}C$ showed the highest tensile strength, which seemed to come from the microstructure of fine upper bainite and some low temperature phases as well as the comparatively fine NbC precipitates.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.409-416
• /
• 2017

The high prevalence of pediculosis capitis, commonly known as head lice (Pediculus humanus capitis) infestation, has led to the preparation of a community-based pediculicidal ointment, which is made of common household items and the extract of Tinospora crispa stem. The present study aimed to evaluate the safety, efficacy, and physicochemical characteristics of the T. crispa pediculicidal ointment. The physicochemical properties of the ointment were characterized, and safety was determined using acute dermal irritation test (OECD 404), while the efficacy was assessed using an in vitro pediculicidal assay. Furthermore, the chemical compounds present in T. crispa were identified using liquid-liquid extraction followed by ultra-performance liquid chromatography quadruple time-of-flight mass spectrometric (UPLC-qTOF/MS) analysis. The community-based ointment formulation was light yellow in color, homogeneous, smooth, with distinct aromatic odor and pH of $6.92{\pm}0.09$. It has spreadability value of $15.04{\pm}0.98g{\cdot}cm/sec$ and has thixotropic behavior. It was also found to be non-irritant, with a primary irritation index value of 0.15. Moreover, it was comparable to the pediculicidal activity of the positive control $Kwell^{(R)}$, a commercially available 1% permethrin shampoo (P>0.05), and was significantly different to the activity of the negative control ointment, a mixture of palm oil and candle wax (P<0.05). These findings suggested that the community-based T. crispa pediculicidal ointment is safe and effective, having acceptable physicochemical characteristics. Its activity can be attributed to the presence of compounds moupinamide and physalin I.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.453-460
• /
• 2018

Owing to rising oil prices and anthropogenic global warming, focused attempts are being made toward production of industrially important compounds by using renewable biomass. In this context, algal biomass as third-generation biomass is important because it doesn't compatible with food resource, has high yield, and helps abate greenhouse gases. Here, we investigate whether Undaria has the highest sugar content, which would make it the most suitable biomass for lactic acid production among the four algal biomasses tested. For effective pretreatment of Undaria, the response surface methodology was used. The amount of solid loaded and catalyst concentration were related to the extraction rate of total sugar. Lactic acid was produced by pretreatment of Undaria by using four Lactobacilli, and L. alimentarius and L. brevis were found to be suitable for lactic acid production.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.21-25
• /
• 2002

The contribution of lipid to thermal flayer generation from glucose-protein reaction was accomplished by isolating flavor compounds from casein-glucose (CG)and casein-glucose-coin oil (CGL) which were stored for 2 and 4 weeks at 6$0^{\circ}C$ and then reacted at 16$0^{\circ}C$ for 1hr. The volatiles from the reactant mixtures were isolated by a solvent extraction method with methylene chloride and analyzed by gas chromatography and gas chromatography-mass spectrometry. Pyrazine, methylpyrazine, 2,5-dimethylpyrazine, 2-dimethylpyrazine ,2-ethy-5- methyIpyrazine and 2-acetylpyrrole originated from interaction of thermal degradation of casein and lipid oxidation were identified in the CGL samples. It was also found that 3-methyl-1-butanol, 2-cyclopene-1,4-diode, heptanal, nonanal, and 2-heptanone were derived from lipid source. Two additional fatty acids, heptanoic acid and octanoic acid were also identified in the CGL samples. 5-Hydroxymethyl-2-furfural, the most abundant volatile, was responsible for the formation of sugar degradation product. The results suggested that the presence of lipid in the samples had more effect on the contribution of volatile formation of glucose-protein thermal reaction than the absence of lipid in the samples.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.367-381
• /
• 2019

We investigate pore pressure conditions and reservoir compaction associated with oil and gas production using 3 different permeability models, which are all based on one-dimensional radial flow diffusion model, but differ in considering permeability evolution during production. Model 1 assumes the most simplistic constant and invariable permeability regardless of production; Model 2 considers permeability reduction associated with reservoir compaction only due to pore pressure drawdown during production; Model 3 also considers permeability reduction but due to the effects of both pore pressure drawdown and coupled pore pressure-stress process. We first derive a unified stress-permeability relation that can be used for various sandstones. We then apply this equation to calculate pore pressure and permeability changes in the reservoir due to fluid extraction using the three permeability models. All the three models yield pore pressure profiles in the form of pressure funnel with different amounts of drawdown. Model 1, assuming constant permeability, obviously predicts the least amount of drawdown with pore pressure condition highest among the three models investigated. Model 2 estimates the largest amount of drawdown and lowest pore pressure condition. Model 3 shows slightly higher pore pressure condition than Model 2 because stress-pore pressure coupling process reduces the effective stress increase due to pore pressure depletion. We compare field data of production rate with the results of the three models. While models 1 and 2 respectively overestimates and underestimates the production rate, Model 3 estimates the field data fairly well. Our result affirms that coupling process between stress and pore pressure occurs during production, and that it is important to incorporate the coupling process in the permeability modeling, especially for tight reservoir having low permeability.