• The Korean Journal of Food And Nutrition
• /
• v.36 no.6
• /
• pp.479-488
• /
• 2023

In this study, quality properties of rapeseed oil by different roasting temperatures (140, 160, 180, and 200℃) were investigated. Roasted-pressed oil (RPO) showed a decrease in lightness and an increase in redness and yellowness with an increase in temperature compared to cold-pressed oil (CPO). In addition, the β-carotene and tocopherol content also increased in RPO as the roasting temperature increased. The tocopherol content increased by 18~20% in RPO at 200℃ compared to CPO. This increase in bioactive components led to improved radical scavenging activity dependent on roasting temperature, and RPO at 200℃ showed a 2.7-fold improvement compared to CPO. Finally, it was observed that higher roasting temperatures resulted in an extended oxidation induction period, increasing by up to 3.3 times. In conclusion, roasting is an effective method for enhancing the oil functionality of domestic rapeseed varieties. This study provides basic data for producing high-quality oil.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.73-77
• /
• 2010

One of the important trends for condition monitoring in the 21st century is the development of smart sensors that will permit the cost-effective continuous monitoring of key machine equipments. In this study, an integrated in-line oil monitoring sensor assigned for continuous in situ monitoring multiple parameters of oil performance is presented. The sensor estimates oil deterioration based on the information about chemical degradation, total contamination, water content of oil and oil temperature. The oil oxidation is estimated by "chromatic ratio", total contamination is measured by the changes in optical density of oil in three optical wave-bands ('Red', 'Green' and 'Blue') and water content is evaluated as relative saturation of oil by water. In order to evaluate the sensor's effectiveness, the sensor was applied to several used oil samples in steel making industry and the results were compared with those measured by standard test methods.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.219-227
• /
• 2020

Among insect species, black soldier fly larvae (BSFL) is a promising ingredient for animal feed as a dietary source. Moreover, BSFL contains a high content of lauric acid (C12:0), which has antimicrobial effects. Therefore, this study evaluated the effect of BSFL oil (BSFLO) as a partial or total replacement of soybean oil (SBO) on the cecal microbiota in broilers. A total of 210 male broiler chickens (Ross 308) at one-day of age were randomly allotted to 3 dietary treatments (10 replicates and 7 birds/group): a basal control diet (CON), the basal diet in which SBO was replaced by 50% (50 BSFLO) or 100% (100 BSFLO) BSFLO. At the end of the study (d 35), 18 birds (6 broilers/treatment) were randomly selected and slaughtered. Samples of cecal digesta were collected to verify their cecal microbiota. Overall, 235,978 gene sequences were generated, and a total of 4,398 operational taxonomic units were identified in the three groups. At the phylum level, Firmicutes was the dominant phyla in all three groups. At the genus level, Faecalibacterium was the dominant genera in all the treatments. There were no significant differences in the relative abundances of all the genera between the BSFLO groups and CON. However, the genus Erysipelatoclostridium was more abundant in the 50 BSFLO group than in the CON (p < 0.05). In conclusion, the substitution of SBO with BSFLO in broiler diets had no negative effect on the cecal microbiota of broilers.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.320-325
• /
• 1992

For natural antioxidant test, the Rhus javanica $Linn\'{e}$ was extracted by 75% ethyl alcohol and fractionated it by chloroform and ethyl acetate using separatory funnel and column chromatography. In the Rhus javanica L. extract, the effective material was disolved easily in ethyl acetate and chloroform. When 600 ppm of ethyl acetate fraction of the extract was added to palm oil and lard, AI(antioxidant index) of each oil was 1.60 and 3.90 respectively. The $CHCl_3$ and EtOAc fractions were more effective than whole extract of Rhus javanica L. The palm oil, lard and soybean oil containing different levels of the Rhus javanica L. extract were stored at $60^{\circ}C$ to compare their antioxidative activity. Peroxide value, acid value and TBA value of each oil were monitored. The Rhus javanica L. extract was very effective to retard oxidation of palm oil and lard. This result coincided with Ranimat test.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.495-500
• /
• 2011

This paper deals with development of an oil boom computation program (OBC Program) for effective response to oil spill. Currently, programs for showing required minimum quantities of oil skimmers and temporary storage tanks have been developed. However, a program for oil boom has not developed, which causes difficulties in oil spill management. The OBC program was developed using LabVIEW 2010 for solving above problems. The OBC program has following strengths: 1. Both experts and non-experts can calculate required quantities of oil booms, 2. The program can save response time, 3. It can reduce damage to properties and marine environment in proportion to reduced response time.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2010

This paper presents a numerical simulation of the radar backscattering from oil spills on ocean surface. At first, a one-dimensionally rough sea surface is numerically generated for a given wind speed at HEBEI SPIRIT accident. Then, an oil-spilled sea surface is represented with a two-layered medium, which is generated by adding a thin low-dielectric oil layer on the randomly-rough highdielectric sea surface. The backscattering coefficients of various oil-spilled sea surfaces are obtained using the Method of Moments and Monte Carlo technique for various surface roughness, oil-layer thicknesses, frequencies, polarizations and incidence angles. The numerical method is verified with theoretical models for simple structures. The reduction of the backscattering coefficients due to the lowdielectric oil-layers on sea surfaces has been analyzed. These numerical results will help to detect any oil spills on sea surfaces, and consequently, to classify SAR images.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.359-359
• /
• 2006

This study deals with development of new bio-based polymeric materials from epoxidized soybean oil (ESO). The curing of ESO in the presence of organophilic montmorillonite produced an oil polymer-clay nanocomposite ("green nanocomposite") showing flexible property. A green nanocomposite (oil polymer-silica nanocomposite) coatings were synthesized by an acidcatalyzed curing of ESO with 3-glycidoxypropyltrimethoxysilane. The curing of ESO in the presence of a biodegradable plastic, poly(caprolactone), produced a composite with semi-IPN structure. The mechanical properties of the composite was much superior to those of polyESO. These new oil-based materials have large potential for applications in various fields.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.268-276
• /
• 2004

As recent demands for cold rolling oil for steel, not only better lubricity, but cost reduction and improvement of work environment are increasingly required. In order to respond these demands, Nihon Parkerizing has developed rolling oils with completely new emulsification system. Comparing with conventional oils, the new system indicates better iron fine removability to maintain oil concentration, due to better iron fine dispersion, and superior mill stain resistance by spray stain test.

• Tribology and Lubricants
• /
• v.17 no.6
• /
• pp.447-452
• /
• 2001

In development process of engine lubrication system, many failure cases are related with aeration problem. Therefore, it is very important to clarify the aeration in the engine oil circuit system. As of today, many factors have been introduced as the major cause in the engine oil aeration. However, still many test data related with those are required to clearly understand it. In this paper the aeration measurement system and calculation method are introduced. And also using this system we measured engine oil aeration for various cases. From these results some conclusions are reduced.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.216-219
• /
• 2001

Experimental studies were carried out to develop oil-absorbent using curdlan solution or gel. Curdlan sponge was prepared by freeze drying. Surface of curdlan sponge was observed with Scanning electron microscopy(SEM). Curdlan sponge absorbed more than 9 times oil and curdlan was recovered by gellation. Curdlan solution gelled at higher temperature than 50$^{\circ}C$ and dissolved at pH 11.0 and viscosity of curdlan solution increased at 40∼50$^{\circ}C$.