• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.185-190
• /
• 2006

유류탱크 구조물을 대상으로 기 실시한 유류탱크 정밀안전진단 결과를 중심으로 구조적 문제점을 도출하고 이를 근간으로 내구년수를 결정하는 기법에 대하여 제시하고자 하였으며 추가로 구조적 개선사항도 제안하였다. 정밀안전진단 결과 폐기된 유류탱크를 분석하면 시공년도와는 상관없이 시공, 유지관리 등의 정도에 따라 상이한 것으로 분석되며, 탱크형식별로는 매립형의 건전성이 가장 취약한 상태이다. 또한 손상원인별로 분석한 결과 강재 부분에 대해서는 강재의 두께, 용접 불량이 가장 많은 상태이며, 기초의 영향에 따른 부등침하의 원인도 다수 조사되었다. 또한, 유류탱크의 수명은 일반적으로 30년 정도를 예상수명으로 관리하고 있으며 연구 결과 내구년수는 30년으로 추정 할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.780-783
• /
• 2003

In this study, As The Tae Yang Metal company manufactured oil tank inserts welding structure bogie, it is Contributed in stability security of freight car of oil tank through static load test, dynamic characteristics analysis. vibration performance test etc. to verify intensity of bogie frame ＆ body structure

• Coupled systems mechanics
• /
• 제2권4호
• /
• pp.389-410
• /
• 2013

Three-dimensional Lagrangian fluid finite element is applied to seismic response analysis of an oil storage tank with a floating roof. The fluid element utilized in the present analysis is formulated based on the displacement finite element method considering only volumetric elasticity and its element stiffness matrix is derived by using one-point integration method in order to avoid volumetric locking. The method usually adds a rotational penalty stiffness to satisfy the irrotational condition for fluid motion and modifies element mass matrices through the projected mass method to suppress spurious hourglass-mode appeared in compensation for one-point integration. In the fluid element utilized in the present paper, a small hourglass stiffness is employed. The fluid and structure domains for the objective oil storage tank are modeled by eight-node solid elements and four-node shell elements, respectively, and the transient response of the floating roof structure or the free surface are evaluated by implicit direct time integration method. The results of seismic response analyses are compared with those by other method and the validation of the present analysis using three-dimensional Lagrangian fluid finite elements is shown.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.400-412
• /
• 2022

This paper provides the results of numerical and theoretical predictions of oil outflows from damaged single-hull and double-hull ships.Theoretical equations derived from the unsteady Bernoulli equation and a CFD method for multi-phase flow analysis were used to estimate the oil outflow rate from cargo tank. The predicted oil outflow rate from a single-hull cargo tank damaged due to grounding and collision accidents showed a good agreement with the available experimental results in both numerical and theoretical analyses. However, in the case of the double-hull conditions, the time variation of the amount of water and oil mixture inside the ballast tank predicted by the theoretical equation showed some different behavior from the numerical results. The reason was that the interaction of the oil flow with the water inflow in the ballast tank was not reflected in the theoretical equations. In the problems of the initial pressure condition in the cargo and ballast tanks, the oil outflow and water inflow were delayed at the pressure condition that the tanks were sealed. When the flow interaction between the oil and water in the ballast tank was less complicated, the theoretical and the numerical results showed a good agreement with each other.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1540-1545
• /
• 2007

In these days, many kinds of tank car such as Oil tank car, Asphalt tank car, Sulfuric Acid tank car and Propylene tank car are used for carrying hazardous materials. Although they have a lot of dangerous possibilities when they meet with accidents examples of collisions and derailments there are not prescribed methods or standards for structural analysis using FEM. In this study, the structural stress analysis for an Asphalt tank car(Non-pressurized tank) and a Propylene tank car(Pressurized tank) was performed using the FEM refer to the test method in JIS E 7102(Design Methods for Tanks of Tank Cars). And then we suggested the tank car analysis procedures and considered the results.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2000

The ocean is now increasingly suffering from pollution mainly caused by oil spill accidents roil increasing marine transportation. It cause not only the deterioration of ocean resources but also critical damage on the ocean ecosystem. Present study is an experimental one for the development of the oil skimmer which can collect spilled-oil actively and effectively from the sea surface. As an effort of achieving it, a new type of water wheel attached nil skimmer was devised, based upon the concept of orifice. The shapes of the water wheel, blades and oil storing tank are found to be very important factors on the oil skimming performance through systematic experimental analysis. Real oil recovery test was also carried out in square tank using the oil skimmer with their optimal shapes. Quite satisfactory result are obtained from the test which showed 99% and 98% recovery rates for light oil and heavy oil in still water condition, respectively.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.309-314
• /
• 2015

A sunken ship often involves an oil spill. This paper was carried out to minimize environmental and cost damages stemming from oil spil of sunken shipl. Through the analysis of both the standards of the oil tank system and installation, we have identified potential oil spill sites and proposed a remedy of prevention. The result of study, the air pipes of the oil tank are a vulnerable point for oil spill. Also, the remote control devices of emergency shut-off valve have poor accessibility at abandon ship, making it difficult to shut off the emergency shut-off valve. Thus, we propose the addition of a remote quick closing valve in the air pipe and the building of a central control system.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.867-872
• /
• 2020

유류 저장탱크는 화학 산업단지의 주요한 구조물로서, 자연재해나 관리 부실로 인한 구조물의 손상은 화학물질의 유출, 화재, 폭발 등의 추가적인 피해를 야기하기 때문에 변형에 대한 파악이 필수적이다. 본 연구에서는 3D 레이저스캐너를 이용하여 유류 저장탱크에 대한 데이터를 취득하고, 설계 데이터와 비교하여 저장탱크 관리를 위한 다양한 분석을 수행하였다. 3D 레이저스캐너로 취득된 데이터와 설계 도면을 이용하여 유류 저장탱크의 모델링을 수행하고, 중첩하여 유류 저장탱크의 검사를 효과적으로 수행할 수 있었다. 또한 시설물 변형에 대한 가시적인 데이터 생성을 위해 변형에 대한 단면도 및 전개도를 생성하였으며, 정량적인 분석을 통해 유류 저장탱크가 최대 -7.16mm의 변형이 발생하였음을 제시하였다. 변형이 크게 일어난 부분에 대한 정밀 검측대상 도면을 생성하여 추가적인 업무에 활용할 수 있는 데이터를 생성하였으며, 향후 3D 레이저스캐너를 이용한 유류 저장탱크의 검사는 유류 저장탱크 변형에 대한 정량적이며, 가시적인 자료를 제공함으로써 시설물 관리의 효율성을 크게 향상시킬 것이다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.85-89
• /
• 2013

In the engine room and the aft body, there are so many fluid tanks such as fresh water tank and oil tank. The vibration analysis for the fluid tank structures has to consider the added mass effect due to the fluid. However, it is known that the result of the fluid tank has the difference according to the boundary condition of the fluid field such as infinite fluid and finite fluid. In this paper, a numerical case study is carried out for the research about the vibration characteristics of the fluid tank with various fluid field. In addition, an experimental study is carried out to verify the validity of the vibration analysis for the fluid tank structure.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.71-80
• /
• 2016

This study is on safety improvement measures through analysis of accident cases during plant storage tank construction. Storage tank is a general term for artificial ground facility constructed to store oil, water, gas, and other chemicals. Some companies have clustered storage tanks (tank farm). The construction methods vary according to the component and types of fluids. Because most of the construction procedures include lifting heavy weight materials using heavy construction equipment and are carried out at high places, storage tank construction contains more risk factors than normal aerial construction. Recently, major accidents such as storage tank collapse have occurred often, and cost many lives due to the characteristics of the structure. In this study we would like to analyze the cause of these accidents and propose measures to improve safety.