In order to compare with domestic underground distribution cables, the foreign cable which was manufactured in USA, 1982 and has been serviced in field for 13 years was characterized with several tests. Water trees, voids, and convolutions are not found in insulation. In hot oil test, insulation is very clean and there was no separation of insulation and conductor shield. The results of degree of crosslinking, FTIR, and DSC are also usual. Specially, the distribution of OIT is very good, which is different from that of domestic cables. The content of impurities is relatively small. This cables was manufactured with good state and no extraordinary degradation is found.
The fault current through the earth originated from a power line ground fault might cause arcing through the soil to an adjacent pipeline, which might bring about not only a catastrophic accident such as gas explosion and oil leakage but also a hazard to the safety of workers responsible for the maintenance and repair of the pipeline. In this paper we experimented on the soil breakdown test using the fixture and outlined the standards for the separation distance of a buried pipeline adjacent to the power line tower.
Kim, Jungil;Lee, Youngkeun;Kim, Yongmin;Yun, Seiyoung
한국응용과학기술학회지
/
제35권4호
/
pp.1478-1486
/
2018
Liquid crystals offer plenty of useful activities as improving the stability of emulsion, increasing moisturizing power, drug release, improving skin feeling and visual effect for cosmetics fields. In order to prepare stable semi-transparent gel emulsion, liquid crystal emulsification method was used. The emulsion stabilities of systems containing glycerin, fatty alcohols, surfactants, water and oil were investigated at various temperatures as time passed. The stabilities of all emulsions were evaluated by means of a polarizing microscope, SEM, rheometer, colorimeter and DSC. Even though the samples stored at $50^{\circ}C$ thermostatic chamber were occurred the reduction of hardness, turbidity and ${\Delta}H$ and the peak shift, the semi-transparent gel emulsion was very stable without separation between water and oils phase in emulsion.
Using mixed nonionic surfactants Span/Tween, we investigated the effects of HLB value on the O/W emulsion stability and rheological behaviors. In this study, MS-01 (Span 60 & Tween 60) and MS-02 (Span 80 & Tween 80) was used as mixed nonionic surfactants. We considered required HLB value 10.85 and selected corresponding HLB value range 8-13. The droplet size distributions, droplet morphology, rheological properties, zeta-potential and creaming index of the emulsion samples were obtained to understand the mechanism and interaction of droplets in O/W emulsion. The results indicated that optimal HLB number for O/W emulsions was 10.8 and 10.7, while using MS-01 surfactant and MS-02 surfactant respectively. MS-01 (HLB = 10.8) sample and MS-02 (HLB = 10.7) sample showed smallest droplet size and highest zeta-potential value. Rheological properties are measured to understand rheological behaviors of emulsion samples. All emulsion samples showed no phase separation until 30 days storage time at $25^{\circ}C$.
Drilling Mud Treatment Systems are widely used for Oil Gas drilling mud circulation, horizontal directional drilling mud recycling, geothermal drilling, mining, coal exploration drilling, water well drilling. Degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. For small amounts of entrained gas in a drilling fluid, the degasser can play a major role of removing small bubbles that a liquid film has enveloped and entrapped. As with the desander, its purpose is to remove unwanted solids from the mud system. The smaller cones allow the desilter to efficiently remove smaller diameter drill solids. In this study, a simulation study is conducted on the degasser of the facility in the Mud Treatment System to conduct a performance review on the gas separation in the mud.
현재 기후 온난화의 주요원인 이산화탄소의 배출은 전 세계적으로 문제가 되고 있다. 이에 따라, 기존에 존재하는 화력 발전소 및 철강 공장과 같은 다량의 이산화탄소를 발생시키는 공장에서는 이산화탄소의 격리와 저장 등의 기술이 필요해졌고, 현재 많은 공장에서 실제 분리가 일어나고 있다. 또한 이러한 직접적인 배출량 감소 말고도 간접적으로 이산화탄소의 배출을 줄일 수 있는 일산화탄소, 수소 등의 환원가스의 재사용에 대해서도 여러 방식으로 연구가 이루어지고 있다. 이에 따라, 대표적인 가스 분리공정 중 하나인 Pressure swing adsorption(PSA)나, 최근 몇몇 공장에서 실 사용이 이루어지고 있는 막 분리공정을 사용하여 이산화탄소, 일산화탄소 및 수소를 분리하는 많은 연구들이 수행되어 왔다. 또한, 이 두 종류의 공정을 합친 하이브리드 공정에 대한 연구도 존재했다. 하지만 분리 목표 가스가 두 가지 이상인 다성분 기체에 대하여 연속공정 모델을 만들고, 이 모델 전체에 대해 조업 최적화 및 경제성 평가를 다룬 연구는 진행되어 오지 않았다. 본 논문에서는 이산화탄소, 일산화탄소, 수소 및 다른 기체들을 포함한 다성분 기체를 대상으로 환원가스로 사용 가능한 일산화탄소, 수소와 분리 저장이 필요한 이산화탄소를 분리하는 PSA와 막 공정을 사용한 연속공정 모델을 개발하고, 이 모델을 사용하여 가능한 시나리오들을 생성한 뒤 조업 최적화를 진행해 경제성을 평가하였다. 그 결과, 수소 가스의 조성이 초기에 14% 정도일 경우 수소를 분리하는 것보다 연료로 사용해야 하며, $CO_2$와 CO의 조성이 30% 정도로 유사할 경우 $CO_2$를 먼저 분리하는 것이 유리하다는 결과를 얻을 수 있었다. 본 연구에서 진행한 결과를 통해 분리 대상 기체의 분리 경제성을 분석하여 가스 분리 여부 결정에 도움을 줄 수 있을 것이다.
실리콘 웨이퍼공정에서 발생하는 실리콘 슬러지로부터 실리콘 및 탄화규소를 분리한 다음, 전해법으로 원소형태의 실리콘을 회수하는 연구를 수행하였다. 실리콘 슬러지의 주요 불순물은 절삭유, 금속불순물, 실리콘 및 실리콘 카바이드를 들 수 있다. 기계적 선별법으로 분리한 실리콘, 탄화실리콘 복합물을 $1000^{\circ}C$에 1시간동안 염화 배소하여 응축하고 회수한 사염화실리콘을 이온성액체인 $[Bmpy]Tf_2N$에 용해하여 전해액으로 사용하였다. 순환전위법으로부터 $[Bmpy]Tf_2N$의 안정한 전압구간과 사염화실리콘을 용해한 $[Bmpy]Tf_2N$ 전해액에서 실리콘의 환원으로 추정되는 환원피크를 얻을 수 있었다. 정전위법(-1.9 V vs. Pt-QRE)에서 1시간동안 금 전극 상에 전해한 다음, 전극표면을 XRD, SEM-EDS 및 XPS 분석을 통하여 실리콘이 원소형태로 전착되었음을 확인하였으며, 미량의 산소가 검출되는 것은 분석과정에서 시편이 공기 중에 노출되었기 때문으로 판단된다.
본 연구에서는 홍삼농축액의 유화특성을 조사하였다. 먼저, 홍삼농축액의 표면활성능을 조사하였으며, 이어서 홍삼농축액 유화액을 제조하고 이의 이화학적 성질을 조사하였다. 홍삼농축액의 물/기름 계면에서 계면장력은 홍삼농축액 농도의 증가와 더불어 감소하였다. 홍삼농축액을 이용하여 유화액을 제조한 결과, 첨가 농도의 증가와 더불어 유화 지방구 크기는 감소하였으며, 홍삼농축액 농도가 3.5 wt% 이상일 경우 일정한 지방구 크기($d_{43}$ ≒ $0.39{\mu}m$)의 안정한 유화액을 형성하였고, separation analyzer($LUMiFuge^{(R)}$)를 이용한 유화안정도 평가 결과에서도 이와 유사한 안정도 변화 경향을 확인할 수 있었다. 또한 홍삼농축액 유화액 중 지방구 크기는 pH 및 NaCl 농도변화에 의존하였는데, pH가 감소함에 따라 지방구 크기는 증가하고 음의 제타전위 값[-67.0 mV (pH 9.0) ${\rightarrow$ + 2.1 mV (pH 2.0)]은 낮아지는 경향을 보였으며, NaCl 농도(0.1 M ${\rightarrow$ 0.5 M)가 높을수록 지방구 크기는 증가하였다. 본 실험을 통해 홍삼농축액의 유화능을 확인할 수 있었다.
본 연구에서는 물성, 세정성, 헹굼액의 유수분리성을 고려하여 유기용매의 종류 및 함량, 계면활성제의 종류 및 함량, 부조계면활성제/계면활성제 (cosurfactant/surfactant, A/S) 비율 등의 변수로 하여 수계/준수계 세정제를 개발하였다. 개발된 세정제들은 대부분 평균 액적크기가 10 ~ 20 nm의 미세 나노입자를 형성 하였으며, 30.2~32.5 dyne/cm의 낮은 표면장력과 낮은 점도 값을 보여 주었다. 플럭스에 대한 용해력은 계면활성제의 소수성이 증가할수록 높게 나타났으며 terpene을 함유한 세정제들이 hydrocarbon 함유 세정제와 대응 시판세정제에 비해 우수한 용해력을 보여 terpene계 세정제가 대체세정제로의 적합성을 보여주었다. 또한, 개발된 세정제들을 함유한 헹굼액은 시판세정제에 비하여 우수한 유수분리성을 보여 헹굼액의 재활용이 가능하여 경제적인 부담과 수질오염을 줄일 수 있음을 보여주었다. 그리고 이렇게 개발된 세정제를 L 전자 회사의 전자부품 생산라인 SMT(surface mount technology) 세정공정에 적용시켜 보았다. 그 결과 solder cream 제거에 있어서 에탄올, 이소프로필알콜(IPA), glycol ether과 같은 물질이 함유된 기존의 세정제에 비하여 세정성능이 2 배이상 향상되었고 생산현장에서 악취와 VOC의 문제를 해결시킬 수 있었다.
폴리디메틸실록산(PDMS)은 화학적 증기 증착 방법을 통해 다양한 물질에 5 nm 두께 이하의 박막 형태로 증착될 수 있다. $SiO_2$, $TiO_2$, ZnO, C, Ni 및 NiO와 같은 다양한 종류의 나노입자 표면에도 PDMS 박막은 증기 증착을 통해 고르게 형성될 수 있으며, PDMS가 증착된 표면은 완벽한 소수성을 갖게 된다. 이 소수성 박막은 안정성이 높아 산, 염기 및 자외선 노출 시에도 잘 분해되지 않으며, 또한 PDMS로 코팅된 나노입자는 다양한 환경 분야에 응용될 수 있다. PDMS 코팅된 소수성 $SiO_2$ 입자는 기름/물 혼합액에서 기름과 선택적으로 반응하고, 기름 유출 사고 시 유류 확산을 억제할 수 있으며, 유출된 기름을 물에서 물리적으로 쉽게 분리할 수 있게 해준다. PDMS 코팅된 $TiO_2$를 진공 상태에서 열처리 할 경우 $TiO_2$ 표면은 완전하게 친수성으로 개질되며, 이때 $TiO_2$가 가시광선을 흡수하여 반응할 수 있게 하는 산소 빈자리 또한 발생하게 된다. PDMS 코팅 후 열처리한 $TiO_2$는 아무 처리하지 않은 $TiO_2$에 비해 가시광 하에서 수중의 유기 염료를 분해하는데 더 뛰어난 광촉매 활성을 보인다. 우리는 해당 연구에서 제시하는 간단한 PDMS 박막 코팅 방법이 다양한 환경 과학 및 공학 분야에서 응용될 수 있음을 소개하고자 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.