• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.410-415
• /
• 2011

A cylindrical type of self-controlled restrictor is designed for hydrostatic bearing of crank shaft for a grinding wheel spindle. The effect of operation parameters, clearance between spindle and housing on bearing stiffness are analyzed to determine the optimum conditions of operation parameters. The lowest values of the supply pressure and the loads by the theoretical and experimental results assuming oil film thickness and shape of pocket are compared.

• The Korean Journal of Pharmacology
• /
• v.1 no.1 s.1
• /
• pp.47-52
• /
• 1965

There are several methods used for screening and evaluating anti -inflammatory agents. Among these, 'Granuloma pouch' technic introduced by Hans Selye is considered as a simple and reliable method. The procedure of 'Granuloma pouch' technic is as follows: Rats were used as experimental animals. An air pocket was produced in the subcutaneous tissue of the mid-dorsal portion between the shoulders by the injection of 25ml of the air which was immediately followed by injection of 1 ml of 1% croton oil as irritant. Inflammatory exudate accumulated in the pouch during the succeeding 14 days. After sacrificing the rats on the last day of the experiment, the amount of the exudate in the pouch and the weight of the granuloma tissue was measured. The author observed and compared the anti-inflammatory activities of the several steroid compounds when they are given by different methods. 1. In the control rats, the amount of inflammatory fluid and the weight of the granuloma tissue after 14 days were 9ml and 3gm respectively. 2. Injection of hydrocortisone 1.5mg subcutanenusly, 24 hours prior to pouch formation into the area where the pouch is to be formed, successfully prevented the inflammatory processes. 3. Injection of hydrocortisone 1.5mg in the air pocket formed 24 hours prior to croton oil injection was ineffective. 4. Injection of hydrocortisone into the pouch at a distance of 5mm apart from the pouch formation did not prevent the development of inflammation. 5. Anti-inflammatory activities of hydrocortisone administered systematically(injected intramuscularly into the area which is not related to the area of pouch formation) for 10 days were proportional to the doses of hydrocortisone administered. 6. DOCA, testosterone, and progesterone did not show the anti-inflammatory activity.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.137-144
• /
• 2000

In order to achieve systematical method for improving motion accuracy of hydrostatic table, an algorithm using finite element method is proposed in this paper. Quantification of averaging effect of oil film on motion error is performed theoretically by analysis on the relationship between spacial frequency of rail form error and motion error of table. Influences of film stiffness and pocket size on the motion error of table are also analyzed theoretically. Validity of the algorithm is verified experimentally from the test on the motion error of table with three types of rail which have different form profile. Experimental results show that the algorithm is very effective to analyze theoretically the motion error of hydrostatic table.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.9-14
• /
• 2001

A new model utilizing a transfer function is introduced in the present paper for analizing motion errors of hydrostatic tables. Relationship between film reaction force in a single hydrostatic pad and form error of a guide rail is derived at various spacial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called averaging effect of the oil film quantitively. For example, it is found that the amplitide of the film reaction force is reduced as the spacial frequency increases or relative width of the pocket is reduced. Motion errors of a multiple pad table is estimated from transfer function, geometric relationship between each pads and form errors of a guide rail, which is named as Transfer Function Method. Calculated motion errors by TFM show good agreement with motion errors calculated by Multi Pad Method, which is considered entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.156-158
• /
• 2008

Along the various gap distance between shoe and swash plate and pocket diameter, lifting force of piston shoe during the compressing stage was calculated. The flow in piston, orifice, shoe, and back space was considered to be 2-dimension axisymmetric and analysed by Fluent, a commercial CFD Software. The wall boundary condition was given as nonslip and adiabatic, while the change in fluid viscosity was considered as linear along temperature. Calculated lifting force and oil leakage of shoe was used in the design of a pump to confirm the shape of the shoe.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• The Korean Journal of Pharmacology
• /
• v.23 no.2
• /
• pp.151-157
• /
• 1987

Cyclobuxine D, a steroidal alkaloid, was extracted from Buxus microphylla var. koreana Nakai. The effects of cyclobuxine D on carrageenin-induced pleurisy and croton oil-induced granuloma pouch in rats was investigated and compared with those of aspirin, hydrocortisone ana dexamethasone. Intrapleural injection of 2% carrageenin caused the accumulation of exudate. The rate of plasma exudation, measured by the exuded dye amounts for 20 min in the pleural cavity after intravenous injection of pontamine sky blue, showed a peak at 5 hr. Cyclobuxine D (5, 20 and 50 mg/kg, i.p.) suppressed dose-dependently the accumulation of the pleural exudate and the exudation of dye. Among several methods used for screening and evaluation anti-inflammatory agents, granuloma pouch technic introduced by Hans Selye (Hans seyle, 1953) is considered as a simple and reliable method. An air pocket was produced in the subcutaneous tissue of the interscapular region by injection of 1 ml of 1% croton oil as irritant. Inflammatory exudate accumulated in the pouch during the succeding 14 days. Cyclobuxine D (5 and 20 mg/kg) decreased fluid volume in pouch and weight of pouch wall in granulomatous inflammation.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.1
• /
• pp.25-31
• /
• 2023

Objectives: This study performed a comparative evaluation of the effects of oil pulling on the periodontal health of smokers. Methods: The experimental (15 subjects) and control (15 subjects) were provided coconut oil and distilled water, respectively. We evaluated the pocket depth (≥4 mm), bleeding on exploration, and Patient Hygiene Performance (PHP) index in both groups following the interventions. Clinical parameters were assessed at baseline, after 4 weeks, and after 8 weeks. Dry mouth and oral health-related quality of life were evaluated at baseline and after 8 weeks. Results: Bleeding on exploring in the control group decreased from 26.17 to 18.33 and from 26.07 to 12.53 in the experimental group (p=0.030), with significant differences in measurement time (p<0.001), and the interaction between group and measurement time (p=0.002). The PHP index in the control group decreased from 24.50 to 16.17 and from 24.00 to 9.83 in the experimental group (p=0.027), with significant differences in measurement time (p<0.001), and the interaction between group and measurement time (p=0.001). Furthermore, the experimental group showed a significant decrease in dry mouth (p<0.001) and a significant increase in oral health-related quality of life (p=0.025). Conclusions: The coconut oil intervention positively affected the periodontal health of smokers.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.99-103
• /
• 2011

Many parameters influence the frictional behavior of steel sheet during stamping. The contact pressure between a die and a sheet during stamping is one of them. Thus, this parameter is investigated for high strength steel (HSS) sheets, which are widely used for auto body panels due to their potential for weight reduction. Since HSS extend the limits of contact pressure for mild steel, the effect of this parameter on friction cannot be ignored. To investigate the influence of contact pressure on the frictional behavior of steel sheets, a flat type of friction test was conducted on three different steel sheets under various contact pressures. For bare steel sheets, the curve representing the relationship between contact pressure and friction coefficient exhibits a U shape. Coated steel sheets show a similar tendency except at low contact pressure. For these materials, when the contact pressure is very low, the friction coefficient slightly increases with pressure before it starts to decrease. The test results show that the effect of contact pressure on frictional behavior of steel sheet is not negligible even for contact pressures that are lower than the strength of HSS sheet.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.56-63
• /
• 2002

A new model utilizing a transfer function is introduced in the present paper for analizing motion errors of hydrostatic tables. Relationship between film reaction force in a single hydrostatic pad and form error of a guide rail is derived at various spacial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called averaging effect of the oil film quantitively. For example, it is found that the amplitide of the film reaction farce is reduced as the spacial frequency increases or relative width of the pocket is reduced. Motion errors of a multiple pad table is estimated from transfer function, geomatric relationship between each pads and form errors of a guide rail, which is named as Transfer Function Method(TFM). Calculated motion errors by TFM show good agreement with motion errors calculated by Multi Pad Method, which is considered entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.