• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.247-253
• /
• 2015

The components of an aero-engine gas path cannot be monitored in a timely way due to a lack of real-time monitoring technologies. As an attempt to address this problem, we have conducted research on a condition monitoring technology based on the charging characteristics of particles in an aero-engine gas path, and emphatically analyze the formation of particles in an aero-engine gas path, the charging mechanism of carbon particles and the factors that influence the charge quantity and polarity. The verification experiments are performed on the simulated experiment platform and a turbo-shaft engine test bench. The results show the carbon particles' carry charge, and an obvious change in the total electrostatic charge level in the aero-engine gas path due to the increased carbon particles produced by burning or abnormal metal particles; the charge number is related to the size of particles, and the bigger carbon particles carry a negative charge and metal particles carry a positive charge; the change in engine power can lead to an obvious change in the level of electrostatic charge in the gas path, and the change in electrostatic charge results from the extra carbon particles formed in the rich-oil burning process. The research provides a reference for establishing the baseline of electrostatic charge while the engine runs on different power. The study also demonstrates the validity of the electrostatic monitoring technology and establishes a base for developing the application of electrostatic monitoring technology in aero-engines.

• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.287-295
• /
• 2006

PAHs (Polycyclic Aromatic Hydrocarbons), one of the carcinogenic materials in environment, were investigated in this study. The standardized analysis conditions were tested, and then various factors which affect to the ambient PAHs concentration in Seoul were estimated. Moreover, the emissions of PAHs from major stationary sources were investigated to determine the quantitative relationships between ambient PAHs concentrations and emission sources. From the factor analysis, three factors relevant to the ambient PAHs in Seoul were found. Factor 1 was related to the concentrations of chrysene, pyrene, indeno (1, 2, 3-cd)pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo prerylene which were mainly emitted from gasoline and diesel fueled cars. Factor 2 showed higher loadings in phenanthrene and anthracene which were due to LNG and BC oil combustion in industry and home. And factor 3 included dibenz(a, h)anthracene and acenaphthene which were emitted from open burning and municipal solid waste incineration. Conclusively, all of three factors were consisted in 82% of total variance. The contribution of mobile sources in ambient air in Seoul was estimated at 64%, that of industrial and home sources at 17%, and that of open burning and municipal incineration at 1%.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.294-305
• /
• 2012

The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.317-330
• /
• 2004

The Purpose of this study was to develop the P $M_{2.5}$ source Profiles, which are mass abundances (fraction of total mass) of a chemical species in P $M_{2.5}$ source emissions. The source categories studied were soil, road dust, gasoline and diesel vehicles, industrial source, municipal incinerator, coal-fired power plant, biomass burning, and marine. The chemicals analyzed were ions. elements. and carbons. From this study, soil source had the crustal components such as Si, hi, and Fe. In the case of road dust. Si, OC, Ca, Fe had large abundances. The abundant species were S $O_4$$^{2-}$, C $l^{[-10]}$ , N $H_4$$^{+}$, and EC in the gasoline vehicle and EC, OC, C $l^{[-10]}$ , and S $O_4$$^{2-}$ in the diesel vehicle. The main components were S $O_4$$^{2-}$, S N $H_4$$^{+}$, and EC in the industrial source using bunker C oil as fuel, C $l^{[-10]}$ , N $H_4$$^{+}$, Fe, and OC in the municipal incinerator source, and Si, Al, S $O_4$$^{2-}$, and OC in the coal -fired power plant source. In the case of biomass burning, OC, EC, and C $l^{[-10]}$ were mainly emitted. The main components in marine were C $l^{[-10]}$ , N $a^{+}$, and S $O_4$$^{2-}$.EX> 2-/.

• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.641-649
• /
• 2011

The aim of this study is to understand the characteristics of exhausting particulate matters (PM) and to control emitted PM from meat cooking restaurants. We found that $PM_{2.5}$, $PM_{5.0}$ occupy 69.2% and 98.6% of total PM from pork cooking, respectively. Therefore, we can see that it is not easy to remove PM generated from a pork cooking process. The collection efficiencies of various control devices, which are a condensing scrubber, a cyclone, an impactor, an oil filter and an electrostatic precipitator (ESP), were measured and compared. ESP had the highest collection efficiency (88.6%) and condensing scrubber had the lowest one (68.0%). However, the system recovering property should be considered to choose a control device because PM from meat cooking process are extremely stickiness. Therefore, we can recommend that ESP following an impactor or a cyclone is the best combination to remove PM generated from meat cooking restaurants.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.1016-1022
• /
• 2010

액상 중유 연료를 사용하는 고용량 증기 보일러에서 발생되어 연소기기 내부에 침적되는 슈트, 슬래그, 크랭커, 회분, 산화물의 on-line 세정을 위한 세정제 제조에 대한 연구를 수행하였다. 액상 중유 연료를 사용하는 보일러 및 가열로에 생성되는 슈트, 슬래그, 크랭커, 회분, 산화물을 제거하는 기존 기술은 보일러 및 가열로의 가동 중단 후 작업자들에 의한 기계적인 처리를 통하여 침적물을 제거하는 기술을 사용하고 있다. 기존 기술을 대치할 수 있고 보일러의 중단이 없는 상태에서 침적물을 세정할 수 있는 세정제의 최적 조성을 도출하였다. 질산암모늄과 질산마그네슘의 혼합물이 주 세정제로 도출되었으며, 각종 전이금속 화합물에 의한 영향을 영향을 연구하여, 세정에 의한 부식을 방지할 수 있으며, 연소효율의 증대를 얻을 수 있는 전이금속화합불 첨가제를 도출하였다.

• 해양환경안전학회지
• /
• 제17권3호
• /
• pp.257-264
• /
• 2011

2010년 4월 20일, 반잠수식 시추선 Deepwater Horizon호가 폭발, 침몰하는 사고가 발생하였으며, 이로 인해 490만배럴(약 77.8만톤)의 원유가 미국 멕시코만으로 유출되었다. 이 사고로부터 1년 이상이 경과함에 따라 정부 측과 오염행위자 측의 각종 분석보고서와 사고로부터 얻은 교훈 등이 발표되고 있다. 본 연구에서는 미국 버락 오바마 대통령의 지시로 구성된 "Deepwater Horizon 기름유출과 원해 석유시추에 관한 국가위원회"의 최종보고서와 미국 해안경비대(USCG)와 미국 에너지 관리 규제 집행국(BOEMRE) 합동조사반의 중간보고서를 바탕으로 기름오염 사고 원인과 사고대응에 대한 측면을 중점적으로 검토 분석하였다. 또한, 분석결과를 토대로 우리나라 정부에서 유출구 봉쇄조치 지도감독 능력 강화, 현장소각과 임시방제정 프로그램의 도입검토 및 향후 미국의 연구개발성과에 대한 지속적인 모니터링 등 국가방제정책의 개선방안을 제시하였다.

• 한국대기환경학회지
• /
• 제20권5호
• /
• pp.685-695
• /
• 2004

Size-segregated measurements of aerosol composition are used to estimate the transport of natural and anthropogenic aerosols at Gosan site during May 2002. The results of measurement show that not only soil dust but also anthropogenic aerosols, including sulfur and enriched trace metals such as Pb, Zn, Cu, are transported to Gosan. This study combines the size- and time-resolved aerosol composition measurements with factor analysis in order to identify some source materials. As a result, coarse particles (2.5${\mu}m$~12${\mu}m$) are influenced by soil, sea-salt, coal, coal combustion, and nonferrous sources. But fine particles have different sources. The fine particles, which the diameter is from 0.56${\mu}m$ to 2.5${\mu}m$, are more affected by road dust, oil combustion, industry. municipal incineration, and ferrous metal sources. The very fine particles, from 0.09${\mu}m$ to 0.56${\mu}m$, mainly supplied by biomass burning, oil combustion, nonferrous and ferrous metal sources.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.699-708
• /
• 2005

To characterize the elemental composition of fine particles in urban area, $PM_{2.5}$ was collected by a 3-stage DRUM impactor at Gwangju during spring and summer. Time and size resolved concentrations for 19 trace elements were obtained by synchrotron X-Ray fluorescence analysis. Trace elements in summer were distributed in smaller size range compared to those in spring. Almost trace element concentrations in fine particles were highly increased during the Asian dust. In spring, soil elements such as Si, K, Ca, Ti and Fe had low enrichment factors indicating the dominant influence of soil dust. However, all elements had high enrichment factors in summer implying that these elements could be emitted from the anthropogenic sources. Factor analysis was conducted with the elemental composition data in order to identify anthropogenic sources of aerosols in urban area during spring and summer. Fine particles in spring have several sources such as soil dust originating from China continental region, coal and oil combustion, biomass burning, sea salt, ferrous and nonferrous metal sources. On the other hand, fine particles in summer were influenced by road dust, gasoline vehicle as well as coal and oil combustion, sea salt, ferrous and nonferrous metal sources.

• 한국대기환경학회지
• /
• 제2권2호
• /
• pp.9-18
• /
• 1986

For identification and apportionment of sources emitting particulate matters in environment, the multi-elemental characterization of size-density fractionated particulate matters was carried out. Eight types of samples were tested; soil, flyash released from burning of bunker-Coil, diesel oil, coal, and soft coal, urban road-way dust, urban dust fall, and airborne particulate matter. The fractions of particulate matters obtained by heavy liquid separation methos with a series of dichloromethane-bromoform were then analyzed using atomic absorption spectrophotometry for Ni, Cr, Cu, An, Fe, Al, and Mg. Each sample showed a different concentration profile as a function of density, and a number of useful conclusions concerning characterization of elemental distribution were obtained. From the density distributions of elements in soil, the maximum value was found for all elements in the density range of 2.2 $\sim 2.9g.cm^{-3}$, including the density of $SiO_2$. However, the distribution of metallic compounds with the density lower than $2.2g.cm^{-3}$ was prevalent in urban roadway dust, urban dust fall, and airborne particulate matter. And the density distribution curves of these urban dusts also have the higher distribution at the density of 2.2 - 2.9g.cm^{-3}$, including the density of wind-blown silica. This tendency generally was prevalent in the natural source elements, such as Al, Fe, Mn, and Mg. The maximum values were found in the density ranges of 1.3 $\sim 2.2g.cm^{-3}$ from the density distribution of elements in oil fired flyash. These distributions of anthropogenic source elements, such as Zn, Ni, Cu, and Cr were higher predominately than those of natural source elements. And the higher distribution was found in the density range of $2.2 \sim 2.9g.cm^{-3}$ from the density distribution of elements in coal and soft-coal fired flyash. These distributions showed similar patterns to soil. But anthropogenic source elements somewhat predominated at the density ranges of $1.3 \sim 2.2g.cm{-3} and 2.9g.cm^{-3}$ to soil. Therefore the higher distribution of anthropogenic source elements in the density ranges of $1.3 \sim 2.2g.cm^{-3} and 2.9g.cm^{-3}$ was considered as anthropogenic origin.