• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.119-126
• /
• 1992

Most civil engineering structures such as bridges, power plants, and offshore platforms are apt to suffer structural damages over their service lives caused by adverse loadings, such as earthquakes, wind and wave forces. Accumulation of structural damages over a long period of time might cause catastrophic structural failure. Therefore, a methodology for monitoring the structural integrity is essential for assuring the safety of the existing structures. A method for the damage assessment of structures by the second order inverse modal perturbation technique is presented in this paper. Perturbation equation consists of a matrix equation involving matrices of structural changes(stiffness and mass matrix changes) and matrices of modal property changes(natural frequency and mode shape changes). The damages of a structure are represented as changes in the stiffness matrix. In this study, a second order perturbation equation is formulated for the damage assessment of structures, and solved by an iterative procedure. The effectiveness of the proposed method has been investigated through a series of example analysis. The estimated results for the structural damage indicated that the present method yields resonable estimates for the structural changes.

• Analytical Science and Technology
• /
• v.31 no.2
• /
• pp.57-64
• /
• 2018

The biodegradation of toluene vapor was investigated using a new type of biofilter equipped with a laboratory-scale evaporative cooler model packed with wood wool fibers (area: $360cm^2$). For the purpose of this study, the biofilter system was inoculated with Pseudomonas sp. RSST (MG 279053). The performance of this biofilter, assessed in terms of toluene removal efficiency (and elimination capacity), was as high as 99 % at a loading rate of $6g/h{\cdot}m^2$. The toluene removal efficiency decreased in an exponential manner with the increase in the loading rate. The cooler model-based biofilter was able to remove more than 99 % of toluene using Pseudomonas sp. RSST (MG 279053) as an effective inoculum. This biofilter is designed to operate under batch conditions for the removal of toluene in confined environments (e.g., automotive plants, boiler rooms in manufacturing facilities, and offshore drilling platforms).

• Journal of Korea Foundry Society
• /
• v.37 no.1
• /
• pp.1-13
• /
• 2017

The purpose of this study is to increase the part recovery rate (to more than 70%) during the casting of a ductile cast iron turbo charger housing using a heater around the riser. Before creating a casting mold, various runner and riser systems were designed and analyzed with a casting simulation analysis tool. The design variables were the heater temperature, top insulation, riser location, riser diameter and the riser shape. During the feeding from the riser to the part, the reverse model was better than the forward model. When heating the riser (above $600^{\circ}C$), solidification of the riser was delayed and the feeding effect was suitable compared to that without heating. At a higher heating temperature, less solidification shrinkage and porosity were noted inside the part. On the basis of a casting simulation, eight molds were fabricated and casting experiments were conducted. According to the experimental conditions, external and internal defects were analyzed and mechanical properties were tested. The ultimate tensile strength and elongation outcome were correspondingly more than 540MPa and 5% after a heat treatment. In addition, a maximum part recovery rate of 86% was achieved in this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2235-2242
• /
• 2016

The electric power system based on fuel cell is applied in various forms to the ship and offshore plants. In particular, a research on the hybrid power system of the fuel cell combined with battery in connection topology has been researched actively. Fuel cell-based hybrid ship has not been carried out research, it is not carried out research in the integrated monitoring system. In this paper, we developed an integrated monitoring system to increase the convenience and stability for the hybrid fuel-cell ship operator. Research into integrated monitoring system based on GUI (Graphic User Interface), in consideration of the stability of the user convenience and ship operations, and developed communication and hardwired signal with the main equipment of the ship, to see in realtime state of the ship. The collected ship operation data is stored and it can be seen after the ship operating.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.421-428
• /
• 2013

This study aims at numerically investigating the angle of attack characteristics of the rudder behind a rotating propeller. The rotating propeller of 5 blades and the full spade rudder are placed in the numerical water tunnel with a uniform flow condition to consider propeller-rudder interaction. The turbulence closure model is employed to simulate the three-dimensional unsteady incompressible viscous turbulent flow around the propeller and the rudder. The present numerical method are well verified by comparing with the experimental results. In order to identify the dependence of the angle of attack of the rudder on the rudder angle, a wide range of rudder angles is considered. The present study carried out the quantitative and qualitative analysis of the angle of attack in terms of the pressure distribution, streamlines and the evaluation of the flow incidence, resulting in that the angle of attack increases as we move from the root and the tip to the center of the rudder, regardless of the rudder angle. The distribution of the angle-of-attack along the span is strongly affected by rotating propeller flow and rudder angle. Consequently, the distribution of the angle-of-attack of the oncoming flow against the rudder leading edge plays a role in determination of rudder performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1131-1136
• /
• 2014

Recently, power converters installed on the specialized vessels such as LNG Carrier and Icebreaker and offshore plants mainly use diode rectifier. However, such devices cause distortion of supply voltage waveform by involving much harmonics to input current of non linearity load in rectifying operation. Distortion of supply voltage waveform can be problems such as false operation of generator, transformer and load device and deterioration of power quality. This thesis is focusing with a view to producing accurate sinusoidal AC waveform with certain load through improvement of distortion of current waveform causing under operation of rectifier by using accurate circuit of DC shaping. The result of computer simulation proved that harmonics involved in current and voltage waveform of power system can be reduced.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.121-148
• /
• 1997

The Japanese fishery management system has been established on the basis of various experience accumulated over many years. The fishery management system in Japan, one of the oldest fishery management systems in the world, is aimed at ensuring comprehensive utilization of the water surface and developing fishery productivity, by giving protection of the breeding environment of aquatic animals and plants, enabling the appropriate use of fishery grounds, preventing and solving disputes over fishery grounds and making other fishery adjustments. Japanese Fishery Law has been changed largely into (1) The Feudal Era(to 1900), (2) The Oldest Fishey Law(1901~48), (3) Current Fishery Law(1949 to present). Japanese fishery legislation is designed as a single package combining coastal, offshore and distant-water fisheries. During the period of the old fishery law, numerous conflicts arose over the joint use of fishing grounds and fish stocks. Such conflicts occurred among users of the same gear as well as between users of different gears or of different sizes of fishing craft. Large scale conflict sometime occurred between neighbouring fishing communities due to a lack of fairness in principle and coordination in practice. Therefore, the new fishery law enacted in 1949. This law was designed primarily to realize the most effective and rational use of fishing grounds and fishery resources, the basic philosophy being that, through democratic organization by fishermen themselves, productivity would be stimulated and incomes and living standards eventually improved. Nowadays, Community Based Fisheries Management through democratic organization by fishermen themselves have to enforce at coastal fisheries. This Community Based Fisheries Management manage to fishery resources by fishermen themselves and harvest in collaboration with that resources. Therefore, this paper is intended to briefly to describe the entire system and the historical development of Japanese fishery legislation in order to assist in reform of our country fisheries management regime.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.353-362
• /
• 2016

As ships become larger and construction of offshore plants increases recently, the amount of outsourcing has increased accordingly in the shipyard. Consequently, the system integration in terms of SCM (Supply Chain Management) of information and material flows has become much more important. Especially, since the SCM in the shipbuilding industry is operated in accordance with the production planning in connection with design, purchasing and production process which are the main components of the supply chain, the best production plan has to be established over the whole scheduling activities from the long-term planning to the short-term planning. The paper analyzes the characteristics of the SCM and the production planning system and suggests the need and the direction of APS (Advanced Planning System) development specialized in the supply chain management only for shipbuilding industry. Furthermore, propose a new SCP-Matrix (Supply Chain Planning Matrix), which is the basis of the APS development, appropriate for the shipbuilding industry and draw the core function of the APS module for the practical production plan.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.567-575
• /
• 2013

A POD analysis based on time-resolved PIV measurements in a circulating water channel has been conducted to identify the skin friction reduction mechanism of outer-layer vertical blades. A recent PIV measurement indicated 2.73% and 7.95% drag reduction in the blade plane and the blade-in-between plane, respectively. In the present study, the influence of vertical blades array upon the characteristics of the turbulent coherent structures was analyzed by the POD method. It is observed that the vortical structures are cut and deformed by the blades array and that their temporal evolution is strongly associated with the skin-friction drag reduction mechanism in the turbulent boundary layer flow.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.1
• /
• pp.37-44
• /
• 2016

Recently researchers are conducting a lot of research related to EEDI in order to satisfy IMO resolution MEPC. Especially they are interested in design of energy saving device. This paper is to design the asymmetric pre-swirl stator for 160K LNG carrier in order to reduce energy. Two types of the asymmetric pre-swirl stator are taken into account; constant and variable pitch angle stators. “constant” and “variable” mean state that the pitch of stators change by radius. The dimensions of the stators are initially determined using potential-flow code. The propulsion performances of the stators are predicted using viscous-flow code. The model test is carried out in towing tank in PNU. Prediction of ship performance generally follow ITTC recommended. Ship wake prediction was done by two method, ITTC 1978 and ITTC 1999. Therefore propulsion performances were compared ITTC 1978 with ITTC 1999 methods. Comparison components are delivered power and thrust deduction coefficient of the model. Final pre-swirl stator is selected by comparing experiment and CFD.