• Journal of Preventive Medicine and Public Health
• /
• 제51권5호
• /
• pp.227-233
• /
• 2018

Objectives: Chronic diseases, including back pain, result in significant patient morbidity and societal burden. Overall improvement in physical fitness is recommended for prevention and treatment. Walking is a convenient modality for achieving initial gains. Our objective was to determine whether neighbourhood walkability, acting as a surrogate measure of physical fitness, was associated with the presence of chronic disease. Methods: We conducted a cross-sectional study of prospectively collected data from a prior randomized cohort study of 227 patients referred for tertiary assessment of chronic back pain in Ottawa, ON, Canada. The Charlson Comorbidity Index (CCI) was calculated from patient-completed questionnaires and medical record review. Using patients' postal codes, neighbourhood walkability was determined using the Walk Score, which awards points based on the distance to the closest amenities, yielding a score from 0 to 100 (0-50: car-dependent; 50-100: walkable). Results: Based on the Walk Score, 134 patients lived in car-dependent neighborhoods and 93 lived in walkable neighborhoods. A multivariate logistic regression model, adjusted for age, gender, rural postal code, body mass index, smoking, median household income, percent employment, pain, and disability, demonstrated an adjusted odds ratio of 2.75 (95% confidence interval, 1.16 to 6.53) times higher prevalence for having a chronic disease for patients living in a car-dependent neighborhood. There was also a significant dose-related association (p=0.01; Mantel-Haenszel chi-square=6.4) between living in car-dependent neighbourhoods and more severe CCI scores. Conclusions: Our findings suggest that advocating for improved neighbourhood planning to permit greater walkability may help offset the burden of chronic disease.

• 천문학회보
• /
• 제40권1호
• /
• pp.42.3-43
• /
• 2015

Using a large sample of 32,000 type 2 AGNs out to z = 0.2, we present the statistical results on the ionized gas outflows, based on the analysis of the velocity shift of narrow emission lines with respect to the systemic velocity measured from the stellar absorption lines. Considering the projection effect, the fraction of type 2 AGNs with the [O III] velocity offset, which is ~50%, is comparable to that of type 1 AGNs. The velocity dispersion of [OIII] is typically larger than that of Ha, suggesting that outflow is prevalent in type 2 AGNs. A weak correlation of the OIII luminosity with velocity shift and velocity dispersion indicates that outflow velocity is stronger for higher luminosity AGNs. Based on our 3-D biconical outflow models with simple assumptions on the velocity structure, we simulate the projected 2-D velocity and velocity dispersion maps, which are spatially integrated to reproduce the measurements of SDSS AGNs. By comparing the distribution of the measured velocity and velocity dispersion of OIII, with the model grids, we constrain the intrinsic outflow velocities. The outflow velocity ranges from a few hundreds to a thousand km/s, implying a strong feedback to ISM.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• 전자공학회논문지CI
• /
• 제45권1호
• /
• pp.37-47
• /
• 2008

DSP에서 제공되는 주소 생성 유닛은 데이터 패스와 병렬적으로 주소 연산을 수행할 수 있게 해 줌으로써, DSP 코드 생성에 중요한 역할을 한다. 프로그램 변수들의 메모리 레이아웃을 결정하는 문제는 주소 생성 유닛의 기능을 이용하여 주소 연산용 명령어를 줄이는 최적화이다. 메모리 레이아웃 생성 단계와 주소 포인터 할당 단계로 구분 되는 이 최적화에서 본 논문은 주소 연산 코드의 수가 최소가 되도록 DSP용 코드 생성의 효과적인 주소 포인터 할당 문제를 다룬다. 제안하는 알고리즘은 고정된 메모리 레이아웃을 가질 때 주소 포인터 할당을 수행하는 기존의 알고리즘의 시간 복잡도를 줄이는 기법이다. 메모리 크기와 수행 시간을 줄이기 위해 알고리즘을 수행할 때 핵심적인 요소들만을 고려하도록 강한 가지치기 방법을 사용하였다. 또한 주소 포인터 할당 문제는 메모리 레이아웃에 영향을 크게 받는 문제이기 때문에 본 논문은 주어진 메모리 레이아웃을 갱신하여 반복적으로 성능을 개선하는 방법을 제안한다. 약 3,000여개의 실제 프로그램으로부터 얻은 변수 접근 시퀀스를 제공하는 OffsetStone 벤치마크를 이용한 실험결과를 통해 본 논문에서 제안한 기법과 알고리즘을 테스트 했다. 제안한 방법은 전통적인 방법보다 평균 25.9%의 적은 주소 코드를 생성해 냄을 보인다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.25-33
• /
• 1986

본 연구에서는 선단요소 해법의 방법을 토대로 소형컴퓨터를 위한 비선형 유한요소의 개발을 시도한 것이다. 주로 참조한 선단요소 해법의 프로그램은 Hinton과 Owen이 작성한 프로그램이며 원판메모리를 최대로 활용하여, 활동변수를 최소화 시키므로써, 실제 소형컴퓨터인 HP-3000II(512KB) 컴퓨터에서 총 자유도가 1000정도 되는 유한요소까지는, 해석이 가능하도록 만들어지게 되었다. 이와같이 완성된 프로그램의 응용성과 신뢰성을 검토해 보기 위해서 표준 CT 시편의 유한요소 를 작성하여(124 element, 428 node, 941 freedom) 크랙선단에 형성되는 소성역의 형상과 소성변형 크기를 수치적으로 추적하여 본 결과, 실험결과와 매우 잘 일치함을 볼 수 있어서 프로그램의 신뢰성을 확인 할 수 있었다. 이때 실험은 SUS-304스테인 레스강단의 소성역을 형성시킨다음, 재결정 방법에 의해 소성역의 형상과 크기를 가시 화 및 정량화 하여서 계산결과와 비교 하였다.

• 대한핵의학회지
• /
• 제38권3호
• /
• pp.259-267
• /
• 2004

목적: 전신용 PET에 대한 표준 성능 평가 방법으로 NEMA NU2-2001이 확립되어 제안되었다. 따라서 새로이 설치되는 PET 스캐너뿐 아니라 기존에 사용 중인 스캐너에 대한 성능 평가가 이 표준 방법에 따라서 새로이 이루어 져야 한다. 이 연구에서는 NEMA NU2-2001 방법을 이용하여 CTI ECAT EXACT 47 PET 스캐너의 공간해상도, 민감도, 산란분획, NECR 등을 측정하였다. 대상 및 방법: 공간해상도를 평가하기 위하여 축 방향 시야의 정 가운데와 축 방향 시야 길이의 1/4을 벗어난 횡단면에 F-10을 채운 유리관(내경 1.1 mm)을 횡단면의 중심에서 1, 10 cm 떨어진 지점에 축 방향과 평행하게 위치시킨 후 PET 영상을 얻었다. 민감도를 측정하기 위하여 폴리에틸렌 및 알루미늄 관에 F-18을 채운 후 불응시간 손실이 1%를 넘지 않는 것을 확인한 후 영상을 획득하였다. 산란분획 및 최적 영상 획득 조건을 얻기 위하여 NECR을 NEMA 산란 팬텀을 이용하여 측정하였다. 결과: FBP재구성 방법(화소 크기: $0.515{\times}0.515mm^2$)으로 영상을 재 구성했을 때 스캐너의 중심에서 1cm 벗어난 지점에서 축방향, 횡축방향 공간 분해능은 0.62, 0.66 cm (FBP, 2D와 3D), 0.67, 0.69 cm (FBP, 2D와 3D)이었고 중심에서 10 cm 벗어난 지점에서 축방향, 횡축반경방향, 횡축접선방향 공간 분해능은 0.72, 0.68 mm (FBP, 2D와 3D), 0.63, 0.66 mm (FBP, 2D와 3D), 0.72, 0.66 mm (FBP, 2D와 3D)이었다. 민감도는 스캐너의 횡축방향 708.6 (2D), 2931.3 (3D) counts/sec/MBq, 횡축방향 중심에서 10cm 벗어난 지점에서 728.7 (2D), 3398.2 (3D) counts/sec/MBq 이었다. 산란 분획은 0.19 (2D), 0.49 (3D)이었고 최고 참 계수율과 NECR은 2차원 영상 획득 모드에서 40.1 kBq/mL 일 때 64.0 kcps, 40.1 kBq/mL 일 때 49.6 kcps, 3차원 영상 획득 모드에서 4.76 kBq/mL 일 때 53.7 kcps, 4.47 kBq/mL 일 때 26.4 kcps이었다. 결론: 이 실험에서 NEMA NU2-2001로 측정한 PET스캐너의 물리적 특성은 PET스캐너에 대한 객관적 평가 및 최적화 된 영상 획득과 분석에 유용할 것이다.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 International Conference on Digital Policy & Management
• /
• pp.145-168
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister in January 2001, commits an additional $3 billion overfive years to encourage and support innovation. The Australian Government aims to build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $400-million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• 한국정보시스템학회지:정보시스템연구
• /
• 제13권1호
• /
• pp.135-159
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Rrsearch is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments'industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime MinisterJanuary 2001, commits an additional ${\$}$3 billion over five years to encourage and support innovation. The Australian Government aims toworld competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity. It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around ${\$}$400mi11ion a year. This cost is expected to rise to over hall a billion by 2005-06 (commonwealth or Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 춘계학술대회
• /
• pp.95-118
• /
• 2004

In industrialised countries, innovation is a key source of economic growth. Research is a key driver of technological innovation and involves the process of systematic investigation and/or experimentation to discover new knowledge. The Governments' industry innovation policy supports a business focus on Research and Development (R&D) through a range of programs in order to achieve these aims. The Innovation Statement (DISR 2000, 20010, launched by the Australian Prime Minister?in January 2001, commits an additional $3 billion over five years to encourage and support innovation. The Australian Government aims to?build world competitive firms and strong research capability in industry to strengthen Australia's international competitiveness and increase national prosperity.?It develops policies and programs to enhance investment in innovation. The Australian Government has established a number of R&D funding support programs aimed at increasing the level of R&D in Australia. The backbone of these programs is the tax concession program, which is made up of the 125 per cent R&D tax concession, the 175 per cent premium tax concession and the tax offset. Over 4000 businesses take advantage of the tax concession scheme, which costs the government around $400?million a year. This cost is expected to rise to over half a billion by 2005-06 (Commonwealth of Australia, 2003). Ensuring these resources are invested where they provide significant national economic benefits is a major policy issue. In this sense, this paper looks at the appropriateness, effectiveness and efficiency of the R&D tax concession with costs and benefits analysis.

• 한국중재학회지:중재연구
• /
• 제21권1호
• /
• pp.157-181
• /
• 2011

The term of defense procurement is used indifferently from defence acquisition. It consists of two sectors : domestic defense procurement and foreign defense procurement. For efficient and transparent defense procurement, Defence Acquisition Program Law in Korea suggests some principles including the purchase of domestically manufactured munitions in the first instance, and the Defense Acquisition Program Administration(DAPA)'s direct procurement of munitions, etc. By reviewing the characteristics, process, current situation and model contracts of defense procurement, it is found that domestic procurement contracts only propose the legal approach instead of arbitration and foreign procurement contracts suggest confusedly both the legal approach and arbitration for amicable disputes settlement. Therefore, it is quite recommended for arbitration organizations such as the Korean Commercial Arbitration Board(KCAB), the Korean Arbitrators Association(KAA), and the Korean Association of Arbitration Studies(KAAS) to foster a variety of strong awareness campaign, education and consulting programs, etc. for the popular use of arbitration clause. It will contribute to settle any disputes and controversies between the parties more speedy, economically and rationally, thereby reducing the costs, time and pains for solving them.