• 한국해양공학회지
• /
• 제28권2호
• /
• pp.160-166
• /
• 2014

Because of industrial development, industrial facilities are becoming more complex and diversified. Plant industries are focused on productivity improvement, cost reduction, and product uniformity by simplifying production processes using automated control. Furthermore, plant industries require higher pressures and temperatures to improve energy efficiency. For this reason, the valves used in plants are operated under harsh conditions. Globe valves and gate valves are mainly used for high pressure these days. However, these valves have various problems, including low maintainability and high cost, due to structural problems. Therefore, butterfly and ball valve applications are increasing in industrial plants. This paper suggests a quadruple-offset butterfly valve that is applicable to bi-direction use, and the principle design parameters are suggested. The selected design parameters are an eccentric flange center line and shaft centerline(Offset 1), an eccentric seat centerline and disc shaft centerline(Offset 2), the angle between the flange centerline and seat wedge angle(Offset 3), the angle between the vertical direction of the disc shaft centerline and seat centerline(Offset 4), and the seat engagement angle. To analyze the interaction effect of the design parameters, ANOM and ANOVA were performed with an orthogonal array. The parameters were found to have effects in the following order: Offset 2, Offset 1, engagement angle, Offset 3, and Offset 4. The interaction between the parameters was insignificant.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.68-76
• /
• 2014

This paper presents an offset error compensation algorithm for the accurate phase angle of the grid voltage in single-phase grid-connected inverters. The offset error generated from the grid voltage measurement process cause the fundamental harmonic component with grid frequency in the synchronous reference frame phase lock loop (PLL). As a result, the grid angle is distorted and the power quality in power systems is degraded. In addition, the dq-axis currents in the synchronous reference frame and phase current have the dc component, first and second order ripples compared with the grid frequency under the distorted grid angle. In this paper, the effects of the offset and scaling errors are analyzed based on the synchronous reference frame PLL. Particularly, the offset error can be estimated from the integrator output of the synchronous reference frame PLL and compensated by using proportional-integral controller. Moreover, the RMS (Root Mean Square) function is proposed to detect the offset error component. The effectiveness of the proposed algorithm is verified through simulation and experiment results.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.73-82
• /
• 2015

This paper proposes an ripple reduction algorithm and analyzes the effects of offset and scale errors generated by voltage sensor while measuring grid voltage in grid-tied single-phase inverters. Generally, the grid-connected inverter needs to detect the phase angle information by measuring grid voltage for synchronization, so that the single-phase inverter can be accurately driven based on estimated phase angle information. However, offset and scale errors are inevitably generated owing to the non-linear characteristics of voltage sensor and these errors affect that the phase angle includes 1st harmonic component under using SRF-PLL(Synchronous Reference Frame - Phase Locked Loop) system for detecting grid phase angle. Also, the performance of the overall system is degraded from the distorted phase angle including the specific harmonic component. As a result, in this paper, offset and scale error due to the voltage sensor in single-phase grid connected inverter under SRF-PLL is analyzed in detail and proportional resonant controller is used to reduce the ripples caused by the offset error. Especially, the integrator output of PI(Proportional Integral) controller in SRF-PLL is selected as an input signal of the proportional resonant controller. Simulation and experiment are performed to verify the effectiveness of the proposed algorithm.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.914-921
• /
• 2014

In this paper, an algorithm is suggested to detect an offset angle of the absolute rotor position sensor after the initial assembly of a PMSG. Unlike previous studies in a stationary state, this one is not designed to detect an electrical angle but rather the absolute position of the rotor is detected while operating the generator. Also,a position sensor, current sensors and voltage sensor were used to ensure reliability. This technique completes the detection of the sensor offset in two steps. In the first step, a zero-crossing of the EMF is measured using a voltage sensor to detect the electrical angle offset when the alternator is actuated by the engine. In the second step, a high frequency current is injected along the d-axis on-line during the control of the generation, eventually to obtain the inductance using a DFT (Discrete Fourier Transform), and then to ultimately extract the final electrical angle offset through the comparison of the inductance magnitude. The suggested algorithm was validated with PSIM simulation and, furthermore, was tested with actual experiments on a dynamometer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.717-718
• /
• 2008

• 대한치과교정학회지
• /
• 제28권4호
• /
• pp.601-609
• /
• 1998

한국인에 적합한 preadjusted bracket을 개발하기 위하여 한국인 성인 정상 교합자 14명을 대상으로 crown angulation, inclination, in and out, molar offset angle을 구했다. 정상 교합자 14명의 cast를 3차원 스케닝한 후 스케닝한 모델을 대상으로 컴퓨터 프로그램을 이용하여 측정하였다. 이는 기존의 모델을 직접 수작업으로 측정할 때보다 정확하고 빨리 측정할 수 있었다. 다음과 같은 결론을 얻었다. 1. 한국인 정상교합자의 각 치아의 치축 경사(angulation), 치관 경사도(inclination), in and out, molar offset angle을 구하였다. 2. 3차원 스케너와 컴퓨터를 이용하여 측정하였기 때문에 보다 정확하고, 빠르게 측정할 수 있었다.

• Computers and Concrete
• /
• 제18권6호
• /
• pp.1135-1151
• /
• 2016

For investigating the effect of the pre-existing joints on the initiation pattern of hydraulic fractures, the numerical simulation of circular holes under internal hydraulic pressure with a different pattern of the joint distributions are conducted by using a finite element code, FRANC2D. The pattern of hydraulic fracturing initiation are scrutinized with changing the values of the joint length, joint offset angle. The hydraulic pressures with 70% of the peak value of borehole wall breakout pressure are applied at the similar models. The simulation results suggest that the opening-mode fracture initiated from the joint tip and propagated toward the borehole for critical values of ligament angle and joint offset angle. At these critical values, the crack grow length is influenced by joint ligament length. When the ligament length is less than 3 times the borehole diameter the crack growth length increases monotonically with increasing joint length. The opening-mode fracture disappears at the joint tip as the ligament length increases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.200-209
• /
• 1998

Experiments have been conducted to determine heat transfer characteristics for a two-dimen-sional turbulent wall attaching offset jet at different oblique angles to a flat surface. The local Nusselt number distributions were measured using liquid crystal as a temperature sensor. Wall static pressure coefficient profiles were measured at the Reynolds number Re 53200(based on the nozzle width, D) the offset ratio H/D from 2.5 to 10 and the oblique angle a from $0^{\circ}$, to $40^{\circ}$ It is observed that the maximum Nusselt number point occurs slightly upstream of time-averaged reattachment point for all oblique angles. The correlations between the maximum Nusselt number and Reynolds number offset ration and oblique angle are presented.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.794-806
• /
• 2004

본 논문에서는 IEEE 802.11a의 OFDM 통신시스템에 대한 송수신 주파수편차의 교정기법을 연구하고 편차주파 수들의 교정오차에 의한 잡음을 분석한다. 반송주파수편차에 의한 심볼당 회전위상을 짧은 훈련신호(short preamble)의 자기상관에서 추정한다. 잡음의 영향을 줄이기 위하여 짧은 훈련신호(short preamble)를 과도표본화 (over-sampling)한다. 파일롯(pilot) 신호를 도입하여 추정된 반송주파수편차의 오차와 표본화 주파수편차에 의한 OFDM 심볼당 회전위상을 추정한다. 이러한 회전위상의 추정과 교정에 CORDIC(Coordinated Rotational Digital Computer) 프로세서 또는 각도와 복소수의 환산표를 사용하고 이것들의 구현기법과 장단점을 비교한다. 복소수와 위상은 CORDIC 프로세서와 환산표에서 한정된 비트(bit) 개수로 계산되므로 각도양자화 오차가 있게 된다. 비트개수에 따른 각도양자화 오차를 OFDM 신호의 SNR로 나타내고 IEEE 802.11a의 편차주파수 교정에서 요구되는 최소한의 비트 개수를 제시한다. 끝으로, 모의실험을 통하여 짧은 훈련신호로 반송주파수편차를 추정하고 CORDIC 프로세서와 환산표에서 사용된 비트 개수에 따른 양자화 잡음을 검증한다.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.43-48
• /
• 2018

파라볼라 오프셋 안테나는 위성 신호 송수신을 위하여 널리 사용된다. 한편, 파라볼라 안테나를 급전하기 위해 혼 안테나를 파라볼라 안테나로부터 이격된 일정 위치에 고정하여야 한다. 하지만 혼 안테나를 고정하기 위한 구조물에 의해 파라볼라 안테나의 방사 패턴에서 부엽 이득이 왜곡되는 문제점이 있다. 따라서 파라볼라 안테나 설계 시 안테나 방사 패턴에서의 부엽 수준을 예측할 수 있어야한다. 기존 시뮬레이션 방법을 이용하면 장시간이 소요되거나 고가의 소프트웨어가 필요하다. 이를 간단하게 해결하기 위해서 광선 추적기법을 이용하여 파라볼라 오프셋 안테나 지오메트리 상에서 계산하여 고각 부엽 각도를 예측한다. 본 논문에서는 광선추적기법을 이용하여 부엽 각도를 계산하고, 계산된 부엽 각도와 시뮬레이션 결과를 비교하여, 예측 방법의 정합성을 보이며 임의의 산란체의 위치 및 각도에 따라 오프셋 파라볼라 안테나의 고각 패턴에 어떠한 영향을 주는지 확인한다.