• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.345-354
• /
• 2024

The bit walk-off effect caused by fiber dispersion and carrier reuse in the base station (BS) are two key problems in radio-over-fiber (ROF) systems. In this paper, a novel frequency-octupling ROF system based on the Mach-Zehnder modulator (MZM) is proposed, which can overcome the bit walk-off effect and realize carrier reuse by inserting pilot signals. Theoretical analysis and simulation verification of the system are carried out. Under the condition of a Q factor greater than 6, the optical fiber transmission distance of the upper and lower links is more than 290 km and 80 km, respectively. The influence of the main device parameters of the system on the Q factor is analyzed when they deviate from their designed values. The system designed in this paper can not only effectively overcome the bit walk-off effect, but also solve the problem of downlink performance degradation and the limitation of tunability caused by conventional carrier reuse in ROF. The system can greatly increase the transmission distance and improve the performance of the system and has an important application prospect in ROF.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.74.2-74
• /
• 2002

$\textbullet$ Roll Control $\textbullet$ Switched Reluctance Motor $\textbullet$ Field Programmable Gate Array $\textbullet$ Single Pulse Mode Current Control $\textbullet$ OR/Off Angle Control

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.255-256
• /
• 2007

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.300-302
• /
• 2002

In this paper the high-speed fault current detector for superconducting fault current limiter is described. Detecting and interrupting the fault currents as quickly as possible is required in order not to exceed the thermal capacity of superconducting fault current limiter. A detecting method of an instantaneous fault current magnitude is adopted in the equipment described in this paper and a current signal through an analog/digital(A/D) converter would be compared with the reference in the digital signal processor(DSP). Around 20ms has elapsed for detecting the fault current. It is necessary to establish the appropriate trade-off between the reliability and detection speed.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.9-16
• /
• 2010

In this paper, we have proposed a new dimmable magnetic ballast for HID(High Intensity Discharge) lamps consisted of AC switches to variate inductance value by using Silicon Controlled Rectifiers and the isolated zero current detector on inductor. Conventional dimming ballast has used relays or Solid State Relays in AC switches. However, a relay is difficult to zero current switching, because it has long operating time(10[ms]), and price competitiveness of SSR is very low. The proposed AC switches are suitable to switch at zero inductor current and it is accurately detected by using a opto-coupler. SCR is cheaper than SSR, and it is suitable to switch at zero inductor current because SCR is automatically turned off under holding current at no gate signal. Operating principles, simulation results and experimental results of the proposed ballast are described.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.149-156
• /
• 2017

Various kinds of accessories(e.g., clock, radio, automatic door locks, alarm devices, etc.) or unit components (e.g., black box, navigation system, alarm, private audio, etc.) require dark current even when the vehicle power is turned off. However, accessories or unit components can be the causes of excessive dark current generation. It results in battery discharge and the vehicle's failure to start. Therefore, immediate detection of abnormal dark current and response are very important for a successful repair job. In this paper, we can increase the maintenance efficiency by presenting a standardized diagnostic process for the measurement of the dark current and the existing problem. As a result of the absence of a system to block the dark current in a vehicle, diagnosis and repair were performed immediately by using a standardized dark current diagnostic process.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.220-226
• /
• 2014

Input current ripple and harmonic components of the power device are main causes of electromagnetic interference (EMI). Although the discontinuous conduction mode (DCM) operation can reduce harmonic components of the power device by reducing reverse recovery current of diode and turn-off voltage spikes of the switch, input current ripple increases due to high peak to peak inductor current. Therefore, in this paper, frequency control algorithm is proposed to reduce the input current ripple of DCM operated interleaved boost converter. In the proposed algorithm, duty ratio is fixed either 0.33 or 0.67 to minimize the input current ripple and the switching frequency is controlled according to operating conditions. 600 W 3-phase interleaved boost converter prototype system is built to verify proposed algorithm.

• 한국조경학회지
• /
• 제28권2호
• /
• pp.108-121
• /
• 2000

This study seeks what kind of factors influence to locate dwellings and to establish scenic spots in nature by a case study focused on a meandering stream. The study specially concentrates on the interrelationship between both residences and beautiful sceneries and a meander cut-off-area that reveals a special topographical characteristics, located at Samji village in Youngyang-eup, Youngyang-gun, Koungsangbuk-do. The meander cut-off area, developed at the middle or upper reaches of a river, often makes up specific landscapes such as precipitous cliffs, sheer cliffs and caves. And the area where is specially created by sudden change of flow due to erosion ;perceived by the cut surface to be the most beautiful scenic spot. These beautiful landscapes were used to be called as Dae, Dam or Gul and managed by Confucian scholars who enjoy refined taste and devote themselves to the study in nature. Moreover, the Ku-Hado-literary means the area of ex-flow-made the scholars' lving with a well prepared basis for agriculture where supplied a cornucopia of organic matters and water. The merit of agriculture made it possible that the scholars became economically independent, and the fact might be the essential point why the meander cut-off area took noticed. Actually, Cho-family has been in Smaji Village for generations, producing a large number of scholars and keeping the actual power of the region. The physical shape of the meander cut-off area, cozily surrounded by mountains, is considered as a good place for the dwelling due to the influence of traditional sight of view for location and P'ungsuchiri which is known as Feng Shui in China and geomancy in the western world. It is a fruit in it own way that we could find the ancestors' discernment and wisdom from this study, who have lived their lives adapting themselves to the given natural environment and also utilizing the nature wisely. But this is a current-argued study on the meander cut-off area. Follow-up studies have to be continued about the landscapes of the meander streams and the meander cut-off areas scattered all over the country except Samji Village and draw the characteristics from the comparative analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.741-744
• /
• 2014

본 연구에서는 비대칭 이중게이트(double gate; DG) MOSFET의 하단 게이트전압에 대한 문턱전압이동 현상에 대하여 분석하였다. 비대칭 DGMOSFET는 4단자소자로서 상단과 하단의 게이트단자에 별도의 전압을 인가할 수 있으므로 하단게이트전압의 변화가 문턱전압에 영향을 미칠 것이다. 그러므로 단채널효과로 알려져 있는 문턱전압이동현상이 하단게이트전압에 의하여 감소할 수 있는지를 관찰하고자 한다. 이를 위하여 문턱전압 이하영역에서의 차단전류모델을 제시하였으며 차단전류가 채널폭 당 $10^{-7}A/{\mu}m$일 경우의 상단게이트 전압을 문턱전압으로 정의하여 채널길이 및 채널두께의 변화에 따라 하단게이트 전압의 변화에 대한 문턱전압의 이동현상을 관찰하였다. 결과적으로 하단게이트전압은 문턱전압이동현상에 커다란 영향을 미치는 것을 알 수 있었으며, 특히 단채널효과가 심각하게 발생하고 있는 채널길이 및 채널두께 영역에서는 더욱 큰 영향을 미치고 있다는 것을 알 수 있었다.

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.581-588
• /
• 2019

본 논문에서는 슬롯화된 ALOHA 센서 네트워크에서 노드의 전송 공평성을 향상하기 위한 변형된 백오프 알고리즘을 제안한다. 계층화된 네트워크 구조에서 하위 노드들에 의해 전송된 데이터를 종합하여 처리해야하는 경우 하위 특정 노드의 성능 저하는 전체 시스템의 성능 저하를 야기할 수 있다. 따라서 네트워크에 참여하는 모든 노드에게 공평한 전송 성능을 보장하는 것이 중요하다. 제안하는 기법에서는 현재의 전송 결과 뿐 아니라 과거의 전송 결과를 고려하여 노드의 전송 대기 시간을 선정한다. 또한 연속적으로 전송에 실패한 노드에게는 점차 짧은 대기시간을 부여하고 연속적으로 전송한 성공한 노드에게는 점차 긴 대기시간을 부여한다. 이를 통해 전송 공평성을 향상시킨다. 시뮬레이션을 통해 제안하는 기법의 성능을 대표적인 백오프 알고리즘인 BEB(binary exponential back-off) 알고리즘과 비교, 분석한다. 실험 결과 제안하는 기법을 적용했을 때 BEB에 비해 전송용량은 다소 저하(최대 5.8%, 최소 2.0%, 평균 3.0%)되지만 공평성은 크게 향상(최대 13.4%, 최소 3.6%, 평균 9.0%)됨을 확인하였다.