• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.121-122
• /
• 2023

Existing modular research has been mainly focused on S (shelter structure) and I (infill interior finishing material), and considerable research has been conducted, and the results are being proposed. However, in the case of the rest (exterior materials and windows, etc.), existing construction methods and materials are borrowed, and supporting hardware members and insulation materials are constructed on site, which acts as a factor hindering overall shortening of the construction period. That is, since the advantages and characteristics of modularity cannot be utilized in the absence of modular cladding, manufacturing of cladding is required. Therefore, it is necessary to develop a cladding system that can drastically reduce the construction period in factories while considering the structural characteristics of PC modulars.

• 대한안전경영과학회지
• /
• 제7권4호
• /
• pp.13-25
• /
• 2005

As there are more accidents which are more serious in construction site than other industries, it needs the safety management system to be SLIM on the same time, There are still lots of difficulties to prevent those accidents exactly, so it also needs a safety supervision team to prevent the accident, unsafe operation and condition before happening, which is also called as a Man-to-Man safety management method. The range of the job site in one personnel's management is very big and large, so it needs the personnel to keep watch the safety operation and prevent any unsafe/fire accidents. Also the personnel also should find out the unsafe points in the job site, and carefully supervise the dead angle site, then support the totally safety management POINT and realize the ZERO accident.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.33-38
• /
• 2013

Limited resources for construction material in the Mae-Hae region, a remote Northern Thailand, acted as an impetus to introduce a new way for constructing their dwellings. The new construction material brought new construction methodology, namely, using earth and bamboo which are indigenous materials, readily available for them to use. Using indigenous material at Mae-Hae region was most ecological and logical method for establishing sustainable dwellings both in terms of monetary and ecological reasons. Prior to the construction at Mae-Hae, Thailand, series of experimental tests on the strength of rammed earth were performed off site at our university and also brought soil samples from the actual job site at Mae-Hae for detailed soil analysis. Through the tests, integrity of the earth and characteristics of the soil were established to build a small senior citizen center as an example. This appropriate technology is expected to contribute to the sustainable construction at Mae-Hae.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.29-37
• /
• 2019

Since construction sites are exposed to outdoor environments, working conditions are significantly dangerous. Thus, wearing of the personal protective equipments such as safety helmet is very important for worker safety. However, construction workers are often wearing-off the helmet as inconvenient and uncomportable. As a result, a small mistake may lead to serious accident. For this, checking of wearing safety helmet is important task to safety managers in field. However, due to the limited time and manpower, the checking can not be executed for every individual worker spread over a large construction site. Therefore, if an automatic checking system is provided, field safety management should be performed more effectively and efficiently. In this study, applicability of deep learning based computer vision technology is investigated for automatic checking of wearing safety helmet in construction sites. Faster R-CNN deep learning algorithm for object detection and classification is employed to develop the automatic checking model. Digital camera images captured in real construction site are used to validate the proposed model. Based on the results, it is concluded that the proposed model may effectively be used for automatic checking of wearing safety helmet in construction site.

• 한국건축시공학회지
• /
• 제23권2호
• /
• pp.175-185
• /
• 2023

OECD 국가를 대상으로 건설업의 노동생산성을 분석한 결과, 한국 건설업의 2019년 취업자당 노동생산성은 PPP 적용시 주요 선진국보다 낮은 수준이다. PPP 적용시 상대국을 100 기준으로 했을 때, 미국의 76.9, 일본의 88.4, OECD 평균의 85.1로 미흡한 수준이다. 특히 OECD 국가의 2019년도 건설업 취업자당 노동생산성을 분석한 결과, 한국은 25위 수준으로 OECD 35개 국가에서 차지하는 순위는 낮은 수준이다. OECD 국가의 건설시장규모와 건설업 노동생산성을 비교·분석한 결과, 건설시장규모가 큰 국가가 건설업 노동생산성이 높다고는 볼 수 없다. 따라서 본 연구는 건설업의 노동생산성을 향상 시키기 위해서 첫째, 스마트 건설기술을 건설현장에 접목하여 적극 활용하는 방안, 둘째, 건설현장 작업보다는 OSC 기술로 공장작업을 통한 현장 설치작업의 활성화 방안을 제안하였다. 마지막으로 모듈러 공법, 기술개발을 확대할 필요가 있다고 제안하였다. 향후에는 첨단 로봇과 공장자동화를 통한 탈현장 생산방식 및 모듈 개발을 확대하면, 건설산업도 제조업과 같은 생산방식의 개편으로 노동생산성이 높아질 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.888-895
• /
• 2020

건설산업에서 근로시간 및 인력 수급의 변화로 탈 현장 공장기반 건설(OSC : Off Site Construction)형태의 생산방식이 주목받고 있다. 과거 1991년에 PC(Precast Concrete) 공동주택의 보급 및 확대 정책이 있었지만, PC 공동 주택은 품질문제 등으로 중단된 후 현재까지 활성화되지 못하고 있는 실정이다. 본 연구는 공동주택 부문에 OSC 기반 PC 적용을 활성화하기 위한 정책과제를 분석하고 전문가 심층 면접조사(FGI : Focused Group Interview)를 실시하여 정책 방향을 도출하고자 하였다. 과거 정책 벤치마킹을 통해 공공부문 우선 적용을 통한 PC 공동주택 물량제공, 공공택지 우선공급, 용적률 우대, 자금지원, 세제지원, 업역 구조개선, 발주방식 개선, 공장인증시스템, 전문인력 양성 등 9개 정책과제를 도출하고 FGI를 실시한 결과로 얻은 시사점은 다음과 같다. 첫째, PC 공동주택 활성화를 위해서는 공공부분의 선도적인 노력이 필요하다. 둘째, 업역의 개편이나 새로운 발주방식의 도입보다는 협업 강화를 유도하는 정책방향이 바람직하다. 셋째, 적정공사비와 품질확보를 위한 제도적 토대 위에서 PC 활성화가 추진되어야 한다.

• 한국건설관리학회논문집
• /
• 제20권4호
• /
• pp.114-125
• /
• 2019

OSC (Off-Site Construction)는 공장 생산 기반의 새로운 건설 방식이다. 생산성과 경제성, 품질면에서 기존 방식에 우위에 있기 때문에 미국, 영국 등 세계 각지에서 OSC 관련 설계 및 생산 표준화, 운반 방법 등과 같은 연구들이 활발하게 진행되고 있다. 새로운 분야의 출현으로 합리적인 관리가 요구됨에 따라 건설사업관리 범위에 대한 분석이 필요한 실정이다. 따라서 이 연구는 CM/PM범위의 "작업 단계 수준"에서 연구 동향 및 관계를 분석하여 연구의 영역, 연구 간 관계, 현재의 연구에서 부족한 부분 등을 파악하였다. 이 연구에서는 2018년 9월3일까지 작업 단계의 수준 94개의 논문으로, OSC (CM/PM)연구에 대한 포괄적인 문헌 검토를 수행하였으며, 분석 결과 다음과 같다. (1) 2006년부터 작업 단계 수준의 연구가 빠르게 증가하고 있다. (2) Non-volumetric pre-assembly유형은 작업 단계에서 가장 크게 기여하고 있다. (3) 건축물 유형에서는 주거용: 주거의 생활, 품질 문제, 비주거: 경제 문제, 공장: 생산성 문제를 다루는 것으로 확인되었다. (4) Non-volumetric pre-assembly 유형은 주거용 및 비주거용 건축물에서 경제성에 대한 내용을 다루고 있었으며, 반면, Modular building 유형은 조립 품질에 관련된 연구가 수행되었다. (5) 2006년부터 프로젝트 관리 영역(예 : 품질, 인적 자원, 위험)이 확장되었다. 이 연구를 활용하면 OSC 새로운 연구 영역을 찾는데 도움이 될 것으로 예상된다. 추후 산업, 기업, 프로젝트 단계 수준까지 분석을 진행한다면, OSC 산업의 전반적인 연구 흐름 및 분야별 영역을 파악할 수 있을 것으로 판단된다.

• 신재생에너지
• /
• 제18권4호
• /
• pp.22-37
• /
• 2022

Large-scale offshore wind power is emerging as a viable solution to achieve carbon neutrality and solve climate change. As power generation complexes require ample space for construction, they create conflicts with residents near the construction site. To resolve the issue with residents, Korea, along with other countries, has developed policies that focus on influencing public perception. However, as the contents of such policies changed several times in a short period in Korea, they were differently applied depending on the timing of the project. This study examines how Korean offshore wind power site development policies, particularly the ones focusing on swaying public perception, were applied differently by regions.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.81-89
• /
• 2021

Recently, interest in OSC(Off Site Construction) is increasing due to the trend of a decrease in skilled workers and an increase in labor costs. In this regard, PC(Precast Concrete) is being reviewed for apartments, the most common type of housing in Korea. As the biggest concern for PC apartment houses, civil complaints such as inter-floor noise and leakage were presented. In this study, the details of the joints were reviewed based on the past cases of PC apartments, and the details of the recently constructed or planned PC apartments were investigated. Through this, the leakage path in the past was analyzed through the existing research literature and data. And wall type RC and PC apartment joint leakage test was performed and we found the needs for a detail of waterproof steps, sealant. Also, joint details were investigated for a rahmen type apartment housing under construction. At last, A discussion was conducted on the direction for a detailed proposal of an improved joint in the future.

• 한국BIM학회 논문집
• /
• 제11권3호
• /
• pp.45-54
• /
• 2021

The augmented reality (AR) has recently became an attractive technology in construction industry, which can play a critical role in realizing smart construction concepts. The AR has a great potential to help construction workers access digitalized information about design and construction more flexibly and efficiently. Though several AR applications have been introduced for on-site made to enhance on-site and off-site tasks, few are utilized in actual construction fields. This paper proposes a new AR framework that provides on-site managers with an opportunity to easily access the information about construction resources such as workers and equipment. The framework records videos with the camera installed on a wearable AR device and streams the video in a server equipped with high-performance processors, which runs an object detection algorithm on the streamed video in real time. The detection results are sent back to the AR device so that menu buttons are visualized on the detected objects in the user's view. A user is allowed to access the information about a worker or equipment appeared in one's view, by touching the menu button visualized on the resource. This paper details implementing parts of the framework, which requires the data transmission between the AR device and the server. It also discusses thoroughly about accompanied issues and the feasibility of the proposed framework.