• 한국해안해양공학회지
• /
• 제16권3호
• /
• pp.171-177
• /
• 2004

디지털 영상을 이용한 새로운 파고계를 연구ㆍ개발하였으며 실험실의 조파 수조를 사용하여 검증하였다. 본 연구는 비디오 동영상이 1/15초의 일정한 간격으로 영상을 촬영하는 규칙성과 아날로그 영상에서 디지털 영상으로의 변환, 그리고 큰 용량의 저장 매체를 활용하였다. 본 파고계는 수면의 움직임에 따라 동일하게 움직이는 부이를 촬영한 영상에서 그 움직임을 자동으로 추출하는 방법으로 파고 관측을 하였으며 참값과 비교 검증하였다. 차후 개선 연구를 통하여 해안에 근접한 천해역에서 파랑 관측을 하는데 활용할 수 있을 것으로 보인다.

• Journal of information and communication convergence engineering
• /
• 제6권3호
• /
• pp.249-254
• /
• 2008

Moored ocean buoys are technically feasible approach for making sustained time series observation in the oceans and will be an important component of any long-term ocean observing system. The 3M disc buoy carried Zeno 3200, MCCB, Orbcomm, Global Star and Bluetooth module. The deployments have relied on Orbcomm and Global Star as the primary satellite communications system. In addition to detailing our practical experience in the use of Orbcomm and Global Star as high latitudes, we will present some of scientific sensor results regarding real-time oceanographic and meteorological parameters such as wind speed, wave height and etc. In this paper we present the design and implementation of a small-scale buoy sensor network. One of the major challenges is that the network is hard to access after its deployment and hence both hardware and software must be robust and reliable.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.139-146
• /
• 1998

This paper introduces a network system for monitoring coastal oceanographic data. The network system consists of three parts such as the buoy to observe oceanographic data, the local site to collect data transferred from buoys, and the host site to construct the oceanographic data-base and to share the information for monitoring coastal oceanographic data. The buoy has a one-board microcomputer to manage and to acquire coastal environment data in real-time. A wireless and wire communication technique is employed in order to transfer data measured by buoys and to link local and host sites, respectively. In measuring coastal environment data, this system shows more cost-effective way than the presents conventional. In addition, the realtime monitoring system continuously from various sites with the network systems.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.92-99
• /
• 1996

Longline type aquaculture facilities are being used for scallpop culture in 30 m of water 2.5 km off the coast of Joomoonjin, Kangwon-do. In this paper, the facilities are modeled by the cabele-buoy-weight system, subject to the nonlinear behaviors of the mooring lines and the effects of current. Its static configuration is shown as a solution of 3-D nonlinear static equation and Runge-Kutta $4^{th}$ method is employed.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.135-141
• /
• 1994

In order to investigate remotely the behavior and distribution of fishes, the telesounder system which was composed of two parts with a buoy station at sea and a base station on land was manufactured trial. The buoy station at sea consists of fishfinder, transmission interface and transceiver. On the other hand, the base station on land consist of transceiver, receiving interface, trigger/signal separator and color display monitor. The system simulation for the performance of telesounder was carried out by use of echo simulator which could input echo signal into fishfinder. The received power (dBm) of transceiver at 29.4MHz decreased almost in proportion to distance between transmitter and receiver, and the electric field intensity was 12.12mV/m at 100 meters distance from transmitter. The image of color display monitor at the base station on land was very well coincident with the records of fishfinder from the buoy station located at sea. Therefore, it is concluded that the telesounder system is very useful in the analysis of the information on the behavior and the distribution of fishes detected from sea.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.393-401
• /
• 2018

This paper reports a novel mobile-type wave energy harvesting system. The proposed system adopts a wave glider's propulsion mechanism. A wave glider's blades were mounted on a circular layout and generated a rotational motion. Combining the wave converting system with the wave glider, a mobile floating-type robotic buoy system was developed. It enabled the relocation of the buoy position, as well as station-keeping for long term operation. It had a small size and could efficiently harvest wave energy. A feasibility study and modeling were carried out, and a prototype system was constructed. Various tank tests were performed to optimize the proposed wave energy harvesting system.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.20-21
• /
• 2016

항로표지란 해상교통의 안전을 도모하고 선박운항의 능률성을 향상시키기 위한 해양교통안전시설로서 국제적으로 IALA 규정 및 권고사항에 따라 적용하고 있다. 그 중 "새로운 위험물(New Danger)"는 항해용 해도 등의 수로서지에 미기재된 것으로 새로이 발견된 위험장해물을 라고 정의하고 있으며, 사주나 암초 등의 자연적 장해물 또는 침선과 같은 인위적 장해물을 포함한다. 이러한 새로운 위험물은 측방표지, 방위표지, 고립장해표지 등을 이용하거나 비상침선표지(Emergency Wreck Marking Buoy)를 사용하여 적절하게 표시하여야 한다. 그러나, 침선표지의 경우 설치의 신속성, 정확성, 부표의 특성 등의 문제로 인해 실질적인 설치 운영상의 문제가 제기 되고 있으며, 선박 침몰 사고의 경우 기상악화, 해역의 특성, 사고 위치의 확인이 어려워 신속한 신위험물표지(New Danger Mark) 설치가 어려운 실정이다. 이 연구는 선박 상갑판에 부착된 소형 침선표지가 선박의 실종 전복 침몰 등 해양사고 발생 시 일정수압에 의해 자동으로 이탈(Auto Release) 후 자기 부상(Auto Buoyance)하여 사고 발생 지점에 신속하고 정확하게 설치되도록 하는 시스템을 개발하고자 한다.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.85-92
• /
• 2013

This paper deals with the resonant type of a WEC (wave energy converter) and the determination method of its geometric parameters which were obtained to construct the robust and optimal structure, respectively. In detail, the optimization problem is formulated with the constraints composed of the response surfaces which stand for the resonance period(heave, pitch) and the meta center height of the buoy. Use of a signal-to-noise ratio calculated from normalized multi-objective results with the weight factor can help to select the robust design level. In order to get the sample data set, the motion responses of the power buoy were analyzed using the BEM (boundary element method)-based commercial code. Also, the optimization result is compared with a robust design for a feasibility study. Finally, the power efficiency of the WEC with the optimum design variables is estimated as the captured wave ratio resulting from absorbed power which mainly related to PTO (power take off) damping. It could be said that the resultant of the WEC design is the economical optimal design which satisfy the given constraints.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권5호
• /
• pp.583-591
• /
• 2007

This paper reports the performance of a 150W PV-wave hybrid system with battery storage in buoy. This system was originally designed to meet a new hybrid ower system for buoy in Korea. In the case or lighted buoys and lighthouses, a light failure alarm system of wireless radio is attached so that light failures are immediately notified to the office. At lighthouse offshore fixed lights and light buoys where commercial electricity is not available, the power source depends on solar system and batteries. This power system has a various problems. Therefore energy derived from the sunshine, wind and waves has been used as the energy source lot aids to navigation. Recently a hybrid system of combining the solar, wind and the wave generator is a favorable system lot the ocean facilities like lighthouse and buoy. The hybrid system in this paper is intended for variable DC load like light, communication system in the buoy and includes a PV-wane generation system and battery. This is composed a high efficiency charging algorithm, switching converter and controller. This paper includes discussion on system reliability, power quality, and effects of hybrid system in the buoy. Simulation and experimental results show excellent performance.

• Ocean Systems Engineering
• /
• 제3권3호
• /
• pp.203-217
• /
• 2013

A PTO (power-take-off) mechanism by using relative heave motions between a floating buoy and its inner mass (magnet or amateur) is suggested. The inner power take-off system is characterized by a mass with linear stiffness and damping. A vertical truncated cylinder is selected as a buoy and a special station-keeping system is proposed to minimize pitch motions while not affecting heave motions. By numerical examples, it is seen that the maximum power can actually be obtained at the optimal spring and damper condition, as predicted by the developed WEC(wave energy converter) theory. Then, based on the developed theory, several design strategies are proposed to further enhance the maximum PTO, which includes the intentional mismatching among heave natural frequency of the buoy, natural frequency of the inner dynamic system, and peak frequency of input wave spectrum. By using the intentional mismatching strategy, the generated power is actually increased and the required damping value is significantly reduced, which is a big advantage in designing the proposed WEC with practical inner LEG (linear electric generator) system.