• Ocean and Polar Research
• /
• v.30 no.1
• /
• pp.119-128
• /
• 2008

Japan's new Basic Ocean Law took effect in 20 July 2007. This law contains that 1) calls for the consolidation of eight government offices that previously worked separately on maritime issues; 2) establishes a basic plan for maritime matters, and; 3) creates a comprehensive maritime policy headquarters, run by the Prime Minister. The result is a structure for the integrated promotion of maritime policy. The Minister of Land, Infrastructure and Transport has been appointed to the newly established position of maritime minister. Japan has been in conflict with Korea and China over EEZ and territory, which has caused the country to turn to ocean. If Japan puts more emphasis on sea, it will be on a collision course with neighboring countries such as Korea, China, Russia, and Taiwan. Japan has been at odds with these countries; with Korea over Dokdo islets, with China over the Senkaku Islands and the East China Sea, where gas fields lie, with Taiwan over fishery rights in the East China Sea, with Russia over the Kuril Islands. Korea's position about the establishment of Japan's new Basic Ocean Law is followed: 1) expression of Korea's position in maritime resourcces of east china sea, 2) understand of strategy for maritime resources development and maritime delimitation in China and Japan, 3) a caution for extention of EEZ and maritime activities, 4)effective and comprehensive policy establishment, and strength in R&D, 5) construction of active and responsive system for maritime issues in neighbor country.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.52-58
• /
• 2019

Marine emissions of Volatile Organic Compounds (VOCs) have received much attention because the International Maritime Organization (IMO) requires the installation of vapour emission control systems for the loading of crude oils or petroleum products onto ships. It was recently recognised that significant corrosion occurs inside these vapour emission control systems, which can cause severe clogging issues. In this study, we analysed the chemical composition of drain water sampled from currently operating systems to investigate the primary causes of corrosion in vapour recovery systems. Immersion and electrochemical tests were conducted under simulated conditions with various real drain water samples, and the impact of corrosion on the marine vapour recovery system was carefully investigated. Moreover, corrosion tests on alternative materials were conducted to begin identifying appropriate substitutes. Thermodynamic calculations showed the effects of environmental factors on the production of condensed sulphuric acid from VOC gas. A model of sulphuric acid formation and accumulation by the characteristics of VOC from crude oil and flue gas is suggested.

• Structural Engineering and Mechanics
• /
• v.61 no.6
• /
• pp.737-746
• /
• 2017

The touch down zone (TDZ) and top connection point of the vessel are most critical part of fatigue damage in the steel catenary riser (SCR). In general, the linear soil model has been used to evaluate fatigue performance of SCRs because it gives conservative results in the TDZ. However, the conservative linear soil model shows the limitation to accommodate real behavior in the TDZ as water depth is increased. Therefore, the riser behavior on soft clay seabed is investigated using a nonlinear soil model through time domain approach in this study. The numerical analysis considering various important parameters of the nonlinear soil model such as shear strength at mudline, shear strength gradient and suction resistance force is conducted to check the adoptability and applicability of nonlinear soil model for SCR design.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.381-389
• /
• 2017

In the present study, the advanced procedure has been proposed to estimate higher accuracy of embedment of pipes that are installed on soft clay seabed. Numerical simulation by OrcaFlex simulation code was performed to investigate dynamic seabed embedment, and two steps, i.e., static and dynamic analysis, were adopted. In total, four empirical curves were developed to estimate the seabed embedment including dynamic phenomena, i.e., behaviour of vessel, environmental condition, and behaviour of nonlinear soil. The obtained results were compared with existing methods (named general method) such as design code or guideline to examine the difference of seabed embedment for existing and advance methods. Once this process was carried out for each case, a diagram for estimating seabed embedment was established. The applicability of the proposed method was verified through applied examples with field survey data. This method will be very useful in predicting seabed embedment on soft clay, and the structural behaviours of installed subsea pipelines can be changed by the obtained seabed embedment in association with on-bottom stability, free span, and many others.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.293-307
• /
• 2020

Every year, the floating macroalgae, green and golden tide, are massively detected at the Yellow Sea and East China Sea. After influx of them to the aquaculture facility or beach, it occurs enormous economic losses to remove them. Currently, remote sensing is used effectively to detect the floating macroalgae flowed into the coast. But it has difficulties to detect the floating macroalgae exactly because of the wavelength overlapped with other targets in the ocean. Also, it is difficult to distinguish between green and golden tide because they have similar spectral characteristics. Therefore, we tried to distinguish between green and golden tide applying the Deep learning method to the satellite images. To determine the network, the optimal training conditions were searched to train the AlexNet. Also, Gaofen-1 WFV images were used as a dataset to train and validate the network. Under these conditions, the network was determined after training, and used to confirm the test data. As a result, the accuracy of test data is 88.89%, and it can be possible to distinguish between green and golden tide with precision of 66.67% and 100%, respectively. It is interpreted that the AlexNet can be pick up on the subtle differences between green and golden tide. Through this study, it is expected that the green and golden tide can be effectively classified from various objects in the ocean and distinguished each other.

• Advances in aircraft and spacecraft science
• /
• v.4 no.3
• /
• pp.297-316
• /
• 2017

With rapid growth in the complexity of large scale engineering systems, the application of multidisciplinary analysis and design optimization (MDO) in the engineering design process has garnered much attention. MDO addresses the challenge of integrating several different disciplines into the design process. Primary challenges of MDO include computational expense and poor scalability. The introduction of a distributed, collaborative computational environment results in better utilization of available computational resources, reducing the time to solution, and enhancing scalability. SORCER, a Java-based network-centric computing platform, enables analyses and design studies in a distributed collaborative computing environment. Two different optimization algorithms widely used in multidisciplinary engineering design-VTDIRECT95 and QNSTOP-are implemented on a SORCER grid. VTDIRECT95, a Fortran 95 implementation of D. R. Jones' algorithm DIRECT, is a highly parallelizable derivative-free deterministic global optimization algorithm. QNSTOP is a parallel quasi-Newton algorithm for stochastic optimization problems. The purpose of integrating VTDIRECT95 and QNSTOP into the SORCER framework is to provide load balancing among computational resources, resulting in a dynamically scalable process. Further, the federated computing paradigm implemented by SORCER manages distributed services in real time, thereby significantly speeding up the design process. Part 1 covers SORCER and the algorithms, Part 2 presents results for aircraft panel design with curvilinear stiffeners.

• Advances in aircraft and spacecraft science
• /
• v.4 no.3
• /
• pp.317-334
• /
• 2017

With rapid growth in the complexity of large scale engineering systems, the application of multidisciplinary analysis and design optimization (MDO) in the engineering design process has garnered much attention. MDO addresses the challenge of integrating several different disciplines into the design process. Primary challenges of MDO include computational expense and poor scalability. The introduction of a distributed, collaborative computational environment results in better utilization of available computational resources, reducing the time to solution, and enhancing scalability. SORCER, a Java-based network-centric computing platform, enables analyses and design studies in a distributed collaborative computing environment. Two different optimization algorithms widely used in multidisciplinary engineering design-VTDIRECT95 and QNSTOP-are implemented on a SORCER grid. VTDIRECT95, a Fortran 95 implementation of D. R. Jones' algorithm DIRECT, is a highly parallelizable derivative-free deterministic global optimization algorithm. QNSTOP is a parallel quasi-Newton algorithm for stochastic optimization problems. The purpose of integrating VTDIRECT95 and QNSTOP into the SORCER framework is to provide load balancing among computational resources, resulting in a dynamically scalable process. Further, the federated computing paradigm implemented by SORCER manages distributed services in real time, thereby significantly speeding up the design process. Part 1 covers SORCER and the algorithms, Part 2 presents results for aircraft panel design with curvilinear stiffeners.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.1-6
• /
• 2013

Nowadays, the weight lightening of automotive is required as conserving the environment has become a major worldwide issue. To solve this issue, various researches for the use of light materials(Alalloy, Mgalloy)and ultra high strength steel as substitutes of the current structural material have been carried out. Application of laser stitch welding to the assembly of automotive produces improvement in strength, lightening of body, higher fuel efficiency, lower production cost as well as reduction in assemble line due to its fast welding speed, superior accessible and weld quality. This process overcomes the shortcomings of the current resistance spot welding such as high electricity consumption, electrode replacement, and economical, technical limitation in design and production method of automotives.

• ALGAE
• /
• v.34 no.2
• /
• pp.177-185
• /
• 2019

Ecklonia cava is popular in Korea as a marine functional materials. E. cava is generally collected and used on the coast of Jeju Island. However, the continuous use of collected natural E. cava may be limited because difficult to secure throughout the year and may be exposed to environmental pollution. Jeju magma seawater (MSW) was known to be significant advantages such as safety, cleanness, stability, and functional improvement. Attempts have been reported on application of MSW to the culturing of macro- and microalgae and showed improved results. Thus, the objective of the present study was to explore the anti-melanogenesis activity of brown seaweed E. cava (E. cava cultured with MSW [MSWE]) extract cultured in tanks with MSW of Jeju Island to evaluate the possibility of cosmeceutical industrial application. MSWE extract showed the higher polyphenolic and dieckol contents than natural E. cava (NE) extract. Anti-melanogenesis activity of MSWE extract and NE extract are tested and compared using tyrosinase and dihydroxyphenylalanine (DOPA) oxidation inhibition assay. MSWE extracts evidenced more effective tyrosinase and DOPA oxidation inhibition activity than that of the NE extracts and the commercial whitening agent, arbutin. MSWE extracts also markedly inhibited melanin synthesis and decreased the expression of melanogenesis-related protein in ${\alpha}$-melanocyte stimulating hormone-stimulated B16F10 melanoma cells without cytotoxicity. These results suggest that MSW cultivation process would be more effective in releasing bioactive compounds with whitening effect from seaweed such as E. cava at an industrial scale.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.331-340
• /
• 2023

To estimate the biological reference points, suitable for fisheries management of sandfish Arctoscopus japonicas in the East Sea of Korea, we simulated the yield-per-recruit (Y/R) from age 0 to 6 (0-2,555 days). The stimulation was based on two instantaneous natural mortality conditions: size-dependent (M_t, d^-1) and constant (M_cons, d^-1); Subsequently, the biological reference points of the two mortality conditions was compared. M_t decreased from 0.0075 d^-1 to 0.0018 d^-1 depending on growth, and M_cons remained constant at 0.0011 d^-1 for all ages. Our Y/R model showed that the maximum yield of M_cons was 14 times higher than that of the M_t. The length at first capture to maximize the harvest at the F_0.1 points of the two natural mortality conditions was L_c,t=10.2 cm (TL) and L_c,cons=17 cm (TL). We concluded that M_t was more suitable for estimating M than M_cons; this is because L_c,t showed minimal difference from the current fishing regulations (11 cm, TL), and M_t reflected more biological characteristics than M_cons. We suggest that 10.2 cm and 0.8 as the suitable length at first capture and corresponding age, respectively for efficient fisheries management of sandfish.