• 한국전문물리치료학회지
• /
• 제15권1호
• /
• pp.46-53
• /
• 2008

The aim of the present study was to determine the effect of proprioceptive neuromuscular facilitation (PNF) leg patterns on the muscle activation of neck flexors. Twenty healthy subjects participated in this study. Each subject performed bilateral asymmetrical PNF leg patterns against manual resistance under four conditions: through the full range of motion toward the right side, left side, and the end range in the right side, left side. Electromyographic (EMG) data was collected from the sternocleidomastoid (SCM) muscles as neck flexors. The root mean square (RMS) value of the SCM was measured and normalized from maximal EMG activity of the SCM. The data were analyzed using the paired t-test and repeated analysis of variance (ANOV A) was used to compare the statistical significance. The results of this study are summarized as follows: Firstly, the RMS values of SCM were significantly higher in all four PNF leg patterns than in the resting condition (p<.05). Secondly, there was no significant difference in muscle activation according to the direction of PNF leg patterns (p>.05). Thirdly, there was no significant difference in muscle activation according to the point of range of the motion of leg patterns (p>.05). It is suggested that PNF bilateral asymmetrical leg patterns have a considerable effect on muscle activation of the SCM, regardless of the range of motion and direction of PNF bilateral asymmetrical leg patterns.

• 융합정보논문지
• /
• 제10권7호
• /
• pp.207-214
• /
• 2020

본 연구는 치과위생사의 직업 정체성이 직업유지에 미치는 영향을 파악하고자 경남 부산 지역 내 치과위생사 155명을 대상으로 연구 윤리 심의위원회에서 심의를 받고 설문 조사를 시행하였다(1041449-201912-HR-003). 자료 분석은 직업 정체성의 3가지 세부항목이 직업유지에 미치는 영향을 단계별로 확인하기 위해 위계적 회귀분석을 시행하였으며 그 결과, 직업 정체성 세부항목 중 직업에 대한 감정이입(β=.358, p<.001), 직업과 개인의 연관(β=.562, p<.001), 직업과 일체감(β=.734, p<.001)의 순으로 직업유지에 영향력이 있었다. 따라서 치위생(학)과의 교육기관에서 조금 더 포괄적인 의미의 직업 정체성에 대한 수업을 시행한다면 직업유지에 도움이 될 것으로 판단한다.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.221-229
• /
• 2017

In the international businesses human resource elements acquired in different countries might have different values in varied industries due to the different quality of education and experiences in the original countries. Using selection models to evaluate expected values in earnings equation of human resource elements such as education and experiences etc. acquired in sending countries, system equations are expanded to examine also the values of science and engineering degrees in technology jobs with selectivity bias correction. This paper used the US census survey data of 2015 on earnings, academic degrees, occupations etc. The US has long maintained the policy of accepting more STEM workers than any other countries and helped maintaining own technological leadership. Assuming per capita GDP gap between the sending country and the US downgrades immigrant human resource quality, it rarely affects occupational selection but depresses earnings on average by two or more years' worth of education. Immigrant quality index in the sense of GDP gap appears to be a valid tool to assess the expected earnings of the worker with. Engineering degrees increase significantly the probability of selecting not only engineering jobs but also general management jobs, as well as increasing the expected earning additionally over nine years'worth of education. Getting a technology job is additionally worth about four years of education. Economics and business degrees are worth additionally almost six years of education but humanities degrees depress expected earnings. Since years after immigration does not very fast enhance earnings capacity, education level and English language ability might be more useful criteria to expect better future earnings by.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.47-52
• /
• 2010

Many industrial accidents have occurred over the years in the manufacturing and construction industries in Korea. However, as the service industry has increased continuously, the share of the accident rate in the service industry was 39.07% in 2009, while the manufacturing industry share was 33.73%. The service industry share overtook the manufacturing industry share for the first time. Therefore, this research considers prevention of industrial accidents in the service industry as well as manufacturing and construction industries. This paper describes a procedure and a method to estimate efficient accident rate forecasting and estimated zero accident time in the service industry in order to prevent industrial accidents in the transportation, storage, and telecommunication divisions. This paper proposes a model using an analytical function for the sake of very efficient accident rate forecasting. Accordingly, this paper has develops a program for accident rate forecasting, zero accident time estimating, and calculation of achievement probability through MFC (Microsoft Foundation Class) software Visual Studio 2008 in the transportation, storage, and telecommunication divisions. In results of this paper, ARIMA (Auto Regressive Integrating Moving Average) is regarded as a very efficient forecasting model for the transportation, storage, and telecommunication division. In testing this model, value minimizing the Sum of Square Errors (SSE) was calculated as 0.2532. Finally the results of this paper are sure to help establish easy accident rate forecasting and strategy or method of zero accident time in the service industry for prevention of industrial accidents.

• 한국환경보건학회지
• /
• 제40권5호
• /
• pp.397-406
• /
• 2014

Objectives: Perchloroethylene (PCE) is a volatile chemical widely used as a solvent in the dry-cleaning and textile processing industries. It was evaluated as Group 2 "probably carcinogenic to humans" by the Integrated Risk Information System (IRIS) of the United State Environmental Protection Agency (U.S. EPA) in 2012. In order to provide a scientific basis for establishing risk management measures for chemicals on the national priority substances list, aggregate risk assessment was conducted for PCE, included in the top-10 substances. Methods: We conducted the investigation and monitoring of PCE exposure (e.g., exposure scenario, detection levels, and exposure factors, etc.) and assessed its multi-media (e.g., outdoor air, indoor air, and ground water) exposure risk with a deterministic and probabilistic approach. Results: In human risk assessment (HRA), the level of human exposure was higher in the younger age group. The exposure level through inhalation at home was the highest among the exposure routes. Outdoor air or uptake of drinking water represented less than 1% of total contributions to PCE exposure. These findings suggested that the level of risk was negligible since the Hazard Index (HI) induced by HRA was below one among all age groups, with a maximum HI value of 0.17 when reasonable maximum exposure was applied. Conclusion: In conclusion, it was suggested that despite low exposure risk, further studies are needed considering main sources, including occupational exposure.

• 경영과정보연구
• /
• 제31권4호
• /
• pp.377-395
• /
• 2012

본 연구의 목적은 몰입의 선행변수인 직업만족, 조직만족, 직업가치가 직업몰입과 조직몰입에 어떠한 관계가 있는 지를 분석한다. 또한 몰입변수들이 직업전환의도와 조직전환의도와는 어떤 영향을 보이는지를 연구한다. 그동안 선행연구에서는 조직몰입에 대한 구성요인에 초점을 둔 연구가 많았으며, 연구초점은 세 가지 몰입을 구성하는 개념 간의 차이를 규명하는 것이었다. 하지만 기존 연구와 달리 본 연구는 직업과 조직에 대한 개념을 구분하여 만족-몰입-전환의도 간의 차이성을 밝혀보았다. 이를 위해 156명의 자료를 대상으로 확정요인분석을 시행하였다. 결과 직업몰입과 조직몰입의 세 가지 선행변수와 두 가지 직업전환의도와 조직전환의도 간 관계가 있는 것으로 나타났다. 부분적인 가설이 지지되었지만, 직업에 만족(몰입, 전환 의도)하는 것과 조직에 만족(몰입, 전환의도)하는 것에 작은 유의적인 차이가 발견되었다. 이는 지금까지의 연구들이 지나치게 몰입에 대한 개념을 폭넓게 정의하고 있었기 때문에 향후 연구에서는 직업과 조직을 구분하여 분석단위나 분석수준의 초점에 따라 판별타당성 문제까지 고려되어야 함을 의미한다.

• The Korean Journal of Physiology
• /
• 제30권1호
• /
• pp.77-83
• /
• 1996

Platelet-activating factor(PAF) is a phospholipid mediator of pulmonary inflammation, and immunologic reaction. In this study, the role of PAF on tumor necrosis factor$(TNF_{-{\alpha}})$ production by rat alveolar macrophages(AM) was examined. When PAF $(10^{-12}{\sim}10{-16}\;M)$ alone was added to AM culture, $(TNF_{-{\alpha}})$ production was not significantly increased above the resting level. In contrast, the combined addition of PAF $(10^{-6}\;M)$ and muramyl dipeptide(MDP) $(1.0\;{\mu}g\ml)$ to AM cultures markedly enhanced $(TNF_{-{\alpha}})$ production with 8.2 fold increase compared with AM culture in resting state. This potentiative effect was 313% above the sum of the separate effects of PAF and MDP. To characterize MDP effects on $(TNF_{-{\alpha}})$ production, the dose-response of AM cultured with various concentrations of MDP was tested. High level of MDP $(10\;{\mu}g\ml)$ could not significantly enhance the potentiation effect on $(TNF_{-{\alpha}})$ production compared with AM cultures with low level of MDP $(0.1\;{\mu}g\ml)$, i.e. 112.5% vs 107.8%, respectively when $10^{-10}$ M of PAF was simultaneously added to the cell culture. These data support that the potentiation of TNF. g production in AM culture is mediated by PAF rather than MDf It was also evaluated whether the similar result was obtained in silica, respirable toxic particle-treated AM culture. $(TNF_{-{\alpha}})$ production was also significantly enhanced in the PAF $(10^{-6}\;M)$ and silica $(50\;{\mu}g\ml)$-added cell cultures with 4.7 fold above the value of silica alone-stimulated cells. These results indicate that PAF can potentiate $(TNF_{-{\alpha}})$ production by MDP-or silica- stimulated AM and suggest that PAF may play a potent role in lung inflammation and disease associated with microbe and occupational dust exposures.

• 한국전문물리치료학회지
• /
• 제13권1호
• /
• pp.54-60
• /
• 2006

This study aimed to compare movement patterns of shoulder joints between the right and left symmetry in stroke patients and control subjects. This study proposes use of the voluntary response index (VRI) calculated from quantitative analysis of surface electromyographic (sEMG) and motion data recorded during voluntary movement as a feeding task. The VRI is comprised of two numeric values, one derived from the total muscle activity recorded for the voluntary motor task (magnitude), and the other from the sEMG distribution across the recorded muscles with the similarity index (SI). Five stroke patients and five age-matched healthy controls were recruited. Feeding motion was performed using the provided spoon five times with rests taken on a chair in between tasks. EMG data were digitized and analyzed on the basis of the root mean square (RMS) envelope of activity. The average amplitude of responses was calculated. Responsiveness and clinically meaningful levels of discrimination between stroke patients and control for EMG magnitude and SI were determined. The similarity index of the results from two successive examinations of both sides apart for stroke patients and control subjects were .86 and .95 in motion analysis and .84 and .99 in electromyographic analysis. The SI of sEMG data and motion data was significantly correlated in stroke patients. The data suggest that SI is a sensitive program for comparing and analyzing the symmetry of muscle activity and motion in both sides. This analysis method has a clinical value in grading muscular activity and movement impairment after brain injury.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권2호
• /
• pp.137-142
• /
• 2012

The temporal subtraction technique as one of computer aided diagnosis has been introduced in medical fields to enhance the interval changes such as formation of new lesions and changes in existing abnormalities on deference image. With the temporal subtraction technique radiologists can easily detect lung nodules on visual screening. Until now, two-dimensional temporal subtraction imaging technique has been introduced for the clinical test. We have developed new temporal subtraction method to remove the subtraction artifacts which is caused by mis-registration on temporal subtraction images of lungs on MDCT images. In this paper, we propose a new computer aided diagnosis scheme for automatic enhancing the lung nodules from the temporal subtraction of thoracic MDCT images. At first, the candidates regions included nodules are detected by the multiple threshold technique in terms of the pixel value on the temporal subtraction images. Then, a rule-base method and artificial neural networks is utilized to remove the false positives of nodule candidates which is obtained temporal subtraction images. We have applied our detection of lung nodules to 30 thoracic MDCT image sets including lung nodules. With the detection method, satisfactory experimental results are obtained. Some experimental results are shown with discussion.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.21-28
• /
• 2000

Various man-made mineral fibers(MMMF) including refractory ceramic fiber(RCF) have been used widely in industries as insulation materials. The effect of fibrous dust on human health depends on fiber size, concentration (exposure level), and durability in biological system. Therefore, these parameters should be determined to evaluate accurately the potential risk of fibers on human health. The purpose of this study was to characterize the size of airborne fiber and the workers＇ exposure to airborne fibers in refractory ceramic fiber manufacturing and processing factories. Airborne fibers were collected on 25-mm mixed cellulose ester membrane filters at personal breathing zones, and analyzed by A and B counting rules of the National Institute for Occupational Safety and Health(NIOSH) Method # 7400. The average ratios of the fiber density by B rule to the fiber density by A rule was 0.84. This result indicates that the proportion of respirable fibers (<3 ${\mu}{\textrm}{m}$ diameter) in air samples was high. The average diameter and length of airborne fibers were 1.05${\mu}{\textrm}{m}$ and 35${\mu}{\textrm}{m}$, respectively. The average fiber concentrations (GM) of all personal samples was 0.26f/cc, and the average concentration was highest at blanket cutting and packing processes. The fifty seven percent of personal air samples was exceeded the proposed American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value(TLV), i.e. 0.2 f/cc. It was concluded that the RCF industrial workers had the higher potential health risk due to small fiber diameter, long fiber length, and high exposure level to the airborne fibers.