• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.156-160
• /
• 2016

Background: Workers in pesticide manufacturing industries are constantly exposed to pesticides. Genetic biomonitoring provides an early identification of potential cancer and genetic diseases in exposed populations. The objectives of this biomonitoring study were to assess DNA damage through comet assay in blood samples collected from industry workers and compare these results with those of classical analytical techniques used for complete blood count analysis. Methods: Samples from controls (n = 20) and exposed workers (n = 38) from an industrial area in Multan, Pakistan, were subjected to various tests. Malathion residues in blood samples were measured by gas chromatography. Results: The exposed workers who were employed in the pesticide manufacturing industry for a longer period (i.e., 13-25 years) had significantly higher DNA tail length ($7.04{\mu}m$) than the controls ($0.94{\mu}m$). Workers in the exposed group also had higher white blood cell and red blood cell counts, and lower levels of mean corpuscular hemoglobin (MCH), MCH concentration, and mean corpuscular volume in comparison with normal levels for these parameters. Malathion was not detected in the control group. However, in the exposed group, 72% of whole blood samples had malathion with a mean value of 0.14 mg/L (range 0.01-0.31 mg/L). Conclusion: We found a strong correlation ($R^2=0.91$) between DNA damage in terms of tail length and malathion concentration in blood. Intensive efforts and trainings are thus required to build awareness about safety practices and to change industrial workers' attitude to prevent harmful environmental and anthropogenic effects.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.30-41
• /
• 2019

Objectives: The effects of particulate matter and ozone on health are being reported in a number of studies. These effects are likely to be stronger on the elderly population, but studies in this regard are scarce. The purpose of this study was to examine the effects of particulate matter ${\leq}2.5{\mu}m$ and ozone on the acute health status of the elderly population. Methods: In order to analyze the health status of the elderly population, the NHIS-Senior Cohort data was used. In this study of people 60 years or older in Seoul, the number of outpatient visits and ER visits between 2002 and 2013 were calculated. Each disorder and the lag effect were analyzed separately. Particulate matter and ozone were analyzed using both the single exposure model and the adjusted multi-exposure model. Results: In the single exposure analysis with PM2.5 as the exposure variable, with each increase of $10{\mu}g/m^3$, the number of outpatient visits increased by 1.0081 times, vascular disease 1.0065 times, chronic pulmonary disease 1.0086 times, and diabetes 1.0055 times. In the multi-exposure model adjusting for ozone, the number of outpatient visits increased by 1.0066 times. There was a one-day lag effect and 1.0066 times increase between PM2.5 and ER visits in the multi-exposure model and 1.0057 times when adjusted for ozone (p value <0.10). There was a one-day lag effect in all multi-exposure models with ozone as the main variable, and when the particulate matter was adjusted, there was a one-day delay and 1.0143 times increase in ER visits. Conclusions: In our study, an increase in the number of outpatient and ER visits in the elderly population in accordance with the increase in PM2.5 and ozone was found. The association found in our study could also produce a socioeconomic burden. Future studies need to be performed in regards to younger populations and other air pollutants.

• The Journal of Korean Society for School & Community Health Education
• /
• v.22 no.4
• /
• pp.49-60
• /
• 2021

Objectives: Laboratories have various latent physical, chemical, biological, and ergonomical factors according to the diversification and fusion of research and development activities. This study aims to investigate the chemical exposure concentrations of college laboratories and evaluate their health risks, and use them as basic data to promote the health of college students. Methods: The sampling and analysis of harmful chemicals in the air in laboratories were performed using Method 1500 of the U.S. National Institute for Occupational Safety and Health (NIOSH)의 Method 1500. The harmful chemicals in the laboratories were divided into carcinogenic and non-carcinogenic chemicals. Risk assessment was performed using the cancer risk (CR) for carcinogenic chemicals and using the hazard index (HI) for non-carcinogenic chemicals. Results: The harmful chemicals in college laboratories consisted of acetone, diethyl ether, methylene chloride, n-hexane, ethyl acetate, chloroform, tetrahydrofuran, toluene, and xylenes. They showed the highest concentrations in laboratories A (acetone 0.001~2.34ppm), B (chloroform 0.95~6.35ppm), C (diethyl ether 0.08~8.68ppm), and D (acetone 0.07~14.96ppm). The risk assessment result for non-carcinogenic chemicals showed that the HI of methylene chloride was 2.052 for men and 2.333 for women, the HI of N-hexane was 4.442 for men and 5.05 for women. Thus, the HI values were higher than 1. The risk of carcinogenic chemicals is determined by an excess cancer risk (ECR) value of 1.0×10^-5, which means that one in 100,000 people has a cancer risk. The ECRs of chloroform exceeded 1.0×10^-5 for both men and women, indicating the possibility of cancer risk. Conclusion: College laboratories showed the possibility of non-carcinogenic health risks for methylene chloride, n-hexane, tetrahydrofuran (THF), toluene, and xylenes, and carcinogenic health risks for chloroform, methylene chloride. However, this study used the maximum values of measurements to determine the worst case, and assumed that the subjects were exposed to the corresponding concentrations continuously for 8 hours per day for 300 days per year. In consideration of the nature of laboratory environment in which people are intermittently exposed, rather than continuously, to the chemicals, the results of this study has an element of overestimation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.146-152
• /
• 2022

Objectives: The purpose of this study is to confirm whether there is a factor to affect the evaluation of fit test of a 2nd class half masks using a OPC test method. Methods: Total 34 adults including Males and Females were tested using OPC-based fit testing equipment while wearing a 2nd class half filtered mask. Results: 1. The result of measuring face dimensions using different tools such as a 3D scanner and digital calipers revealed that the variation of lip width was not statistically significant because there was only a difference of about 4 mm. However, it showed that a difference in face length was statistically significant enough with 10 mm(p<0.000). 2. The fit factor for each exercise stage according to gender was the highest at 124.54(p<0.001) in Step 3, and the fit factor was the lowest at 73.75 in Step 1. 3. In the evaluation of the degree of fit factor according to gender, female passed 67.44%, which was higher than the value in male(p<0.038). 4. The acceptance rate of the group having a face length of shorter than 110 mm was 91.67%. On the other hand, the acceptance rate of the group with a face length of longer than 110 mm was 47.27%(p<0.000). 5. The fit test was possible because the fit factor with 2nd class half masks corresponding to FFP1(Filtering Face Piece 1) was passed 55% or more. Conclusions: The test results showed that using a 2nd class half filtered mask, it is important to wear a properly designed mask so that face size does not affect the fit factor.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.1
• /
• pp.69-85
• /
• 2022

Objective : This study aimed to develop a Comprehensive Oro-Facial Function Scale (COFFS) that can evaluate oro-facial function in patients with dysphagia. Methods : To verify the item composition and reliability of the COFFS, preliminary items were collected by selecting and analyzing four previous studies, and the Content Validity Ratio (CVR) was derived through a second survey of experts. Cronbach's 𝛼 was calculated for the internal validity of the evaluation items, and the test-retest reliability and inter-rater reliability were calculated using the internal classification coefficients (ICC). Results : The content validity ratio of all items was 0.67; in the case of Cronbach's 𝛼 value for each domain, 0.849 for communication domain, -0.224 for the oro-facial structure and shape, 0.831 for the ability to perform orofacial movements, and 0.946 for mastication and swallowing function. The test-retest reliability was 0.974 and the inter-rater reliability was 0.937, showing high reliability. Conclusion : In this study, the evaluation tool of COFFS was finally selected from 34 items in four areas and developed on a 3-5 point scale according to the evaluation items. In future studies, additional research is needed to prove its validity through correlation with other evaluation tools that measure oro-facial function.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.61-66
• /
• 2010

Purpose: Recently, Department of Nuclear Medicine have an interest in Video Display Terminals (VDT) syndrome including musculoskeletal disorders, ophthalmologic disorders, trouble of electromagnetic waves and stress disorders occur to VDT workers as the growing number of users and rapid pace of service period supply in large amount. This study research on the actual condition for VDT syndrome in Nuclear Medicine, Seoul National University Hospital (SNUH), discover the problem and draw a plan of upcoming improvement. The aim of this study establish awareness about VDT syndrome and is to prevent for it in the long run. Materials and Methods: Department of Nuclear Medicine, SNUH is composed Principle part, Pediatric part and PET center. We estimated risk factors visit in each part directly. Estimation method use "Check list for VDT work" of Wonjin working environment health laboratory and check list is condition of VDT work, condition of work tables, condition of chairs, condition of keyboards, condition of monitors, working position, character of health management and other working environment. Analysis result is verified in Department of Occupational and Environment, Hallym University Sacred Heard Hospital. Results: As a result of analysis, VDT condition of Department of Nuclear Medicine, SNUH is rule good. In case of work tables, recent of things are suitable to users upon the ergonomical planning, but 15% of existing work tables are below the standard value. In case of chairs are suitable, but 5% of theirs lost optimum capacity become superannuated. The keyboards are suitable for 98% of standard value. In case of monitors, angle control of screen is possible of all, but positioning control is impossible for 38%. In case of working position, 10% is fixed positioning for long time and some of the items researched unsuitable things for standard. At health management point, needed capable of improvement. Also, other working condition as lighting, temperature, noise and ventilation, discovered the problem, but is sufficient to advice value. Conclusion: VDT syndrome is occurrences of possibility continuously, come economical expensive about improvement, is inherent in various causes and originate without your knowledge. So, there is need systematic management system. In Nuclear Medicine, VDT syndrome make it better that constant interest and effort as improvement of ergonomical working environment, improvement of working procedure, regular exercise and steady stretching, and can be prevented fairly. This promote physical and mental condition of worker in top form in comfortable working environment, so this is judged by enlargement of operations efficiency and rising of satisfaction ratings of the inside client.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2013

Purpose: This study is conducted to evaluate the job stressors for opticians in Ulsan city. Methods: We investigated job stress of 180 opticians working in Ulsan. The results of this study from The Korean standard job stressors assessment tool developed by Korea occupational safety and health agency (KOSHA) was compared with Korean reference value. The questionnaire on the social, demographic characteristics of opticians was also used to find the factors affecting to job stressors by using multiple linear regression analysis. Results: Among the eight fields of stressors, the interpersonal conflict (the median value; 33.4, the measurements; men; 38.8, women; 41.5) and company culture (the median; 41.7, the measurements; men; 47.4, women; 49.3) were higher than the median value of the Korean workers. By multiple linear regression analysis, the significant factors to the interpersonal conflict were the duty, working hours, unmarried, average salary. In terms of the company culture, last school, rest day of month, job career, average salary and working hours were significantly associated to the score of company culture. Conclusions: Based on the results, important factor in the formation of a positive organizational culture through to improve treatment of opticians investigation and mutual horizontal communication systems in the workplace for the manage on interpersonal conflict and company culture.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.536-550
• /
• 2018

This paper examine how acceptance of AI robots can be achieved according to occupational groups when the discourse on human labor and occupation changes due to the new industrial revolution is spreading steadily. Previous research on the acceptance of new technologies and products has predicted use behavior through subjective beliefs and values that do not change well over the short term. Therefore, this study compares the beliefs, values, and use intention of AI robots according to occupation. As a result, the subjective belief factor for AI robots was classified into belief in rationality(reason) and belief in benevolence(emotion). The value factors were divided into acceptance value(role performance, communication, social comparison) and avoidance value(risk, complexity). There was a significant difference in the effect of these on the use intention of AI robot by occupation and employment types. This result suggests that there are gaps in the occupation group at the rate of technology acceptance, as opposed to the existing prediction that AI robots will be rapidly expanded by professionals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.76-87
• /
• 1998

The concentration of welding fume was measured by 221 welders themselves in chassis frame workplace of the manufactory from February, 1, 1996 to May, 31, 1997. Welding parameters were the welding current and the distance between helmet and arc. Those two optimum conditions were proposed by excess probability analysis using logistic regression, so the best position in the workplace was proposed considering two factors to control the welding fume. The results are as followings; 1) The excess proability of welding fume TLV was over 99% in above 260 Amperes of welding current and also in below 30cm of distanced between helmet and arc. 2) The equation from logistic regression analysis using SPSS/PC+5.02 had the welding current as a independent variable and the excess of welding fume TLV as a dependent variable (p<0.05). Logit(welding fume TLV) = 0.1296 ${\times}$ wlding currnet - 28.8750 3) The equation from logistic regression analysis using SPSS/PC+5.02 had the distance between helmet and arc as a independent variable and the excess of welding fume threshold limit value a, a dependent variable (p<0.05). Logit (welding fume TLV) = -0.6809 ${\times}$ distance between helmet and arc +25.1665 4) Considering both cases or 2) and 3). the result equation is following. (p<0.05). Logit (welding fume TLV) = 0.1346 ${\times}$ welding current -0.3859 ${\times}$ distance between helmet and arc -15.7382 5) The excess probability of welding fume threshold limit value was 100% in above 240 Ampere of welding current. Thus, below 220 Ampere can be suggested to reduce the 40% number of welders who have a excess welding fume threshold limit value. 6) The excess probability of welding fume TLV was 100% in below 34cm of distance between helmet and arc. Thus, over 38cm can be suggested to reduce the 33% number of welders who have a excess welding fume TLV. 7) Considering both 5) and 6) cases, first of all, the best welding current can be 200 Ampere to have a below 15% of welding fume excess probability for the welders who works in distance of 34-37cm. Secondly, to have a below 30% excess probability of welding fume TLV, the working distance must be over 38cm in 220 Ampere and 32cm in 200 Ampere. 8) To reduce the average exposure concentration of welding fume ($8.21{\pm}5.83mg/m^3$), the movable local exhaust system equipped with flexible hoods can be used.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.187-192
• /
• 2017

Objectives: It is difficult to identify exposure factors in the semiconductor industry due to low exposure levels to hazardous substances and because various processes take place in fabrication (FAB). Furthermore, a single worker often experiences a variety of job histories, so it is difficult to classify similar exposure groups (SEG) in the semiconductor industry. Therefore, we intend to develop a new exposure index, the period of working in FAB, that is applicable to the semiconductor industry. Methods: First, in specifying the classification of jobs, we clearly distinguished whether they were FAB workers or non-FAB workers. We checked FAB working hours per week through questionnaires administered to FAB workers. We derived an exposure index called FAB-Year that can represent the period of working in FAB. FAB-Year is an index that can quantitatively indicate the period of working in FAB, and one FAB-Year is defined as working in FAB for 40 hours per week for one year. Results: A total of 8,453 persons were surveyed, and male engineers and female operators occupied 90% of the total. The average total years of service of the subjects was 9.7 years, and the average FAB-Year value was 6.8. This means that the FAB-working ratio occupies 70% of total years of service. The average FAB-Year value for female operators was 8.4, for male facility engineers it was 7.7, and for male process engineers it was 3.5. A FAB-Year standardization value according to personal information (gender, job group, entry year, retirement year) for the survey subjects can be calculated, and standardized estimation values can be applied to workers who are not participating in the survey, such as retirees and workers on a leave of absence (LOA). Conclusions: This study suggests an alternative method for overcoming the limitations on epidemiological study of the semiconductor industry where it is difficult to classify exposure groups by developing a new exposure index called FAB-Year. Since FAB-Year is a quantitative index, we expect that various approaches will be possible in future epidemiological studies.