• 제목/요약/키워드: Occupational exposure level

검색결과 488건 처리시간 0.026초

직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 - (Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model -)

  • 김순례;이복임;이종은;이경용;정혜선
    • 지역사회간호학회지
    • /
    • 제14권2호
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF

건축물 유형에 따른 라돈 저감 효과 평가 (Evaluation for Effectiveness of Radon Mitigation on Dwellings and Public Buildings in Korea)

  • 이동현;류승훈;조정흠;서성철
    • 한국산업보건학회지
    • /
    • 제24권4호
    • /
    • pp.518-527
    • /
    • 2014
  • Objectives: The adverse health effects attributed to exposure to radon have been well known over the world. However, the efforts for prevention and mitigation of radon have not been taken in Korea so far. The purpose of this study was to evaluate the effectiveness of mitigation methods applied for various types of houses and public buildings with high level of radon. Methods: Based on the results of "National Radon Survey" performed by the National Institute of Environmental Research(NIER) in 2010-2012, we selected 30 candidate buildings consisting of 20 houses and 10 public buildings with greater than $148Bq/m^3$ of radon level. We measured the concentration of radon in 30 buildings, using E-PERMs and RAD-7 during January to March of 2013. More than five E-PERMs and one RAD-7 per house were installed for seven days. Ten houses and five public buildings were finally chosen to be mitigated after mainly considering the level of radon and the location of buildings nationwide. Three mitigation methods such as Sealing, two types of Active Ventilation(window-shaped and wall-typed ventilations), and Active Soil Depressurization(ASD) were applied, and the concentrations of radon were measured before and after mitigation, respectively. To evaluate the effectiveness of mitigation methods, reduction rates of radon were calculated and Wilcoxon's signed-rank test was performed. Results: The mean concentration of 15 buildings just before radon mitigation was $297.8Bq/m^3$, and most of the buildings were located in Gangwon, Chungbuk, Chungnam, and Daegu areas(73.3%), and built in 1959-1998. The level of radon decreased from 48% to 90% and kept the below recommendation limit of $148Bq/m^3$ after installation of radon mitigation. Among mitigation methods applied, the reduction rate(58.7-90.4%) of radon attributed to ASD was the greatest than that of other methods, followed by Active Ventilation(48.4-78.4%) and Sealing(<22%). The effectiveness of radon reduction by window-shaped Active Ventilation(63.2-75.2%) was relatively better than that of wall-typed Active Ventilation(48.4-54.3%). Conclusions: The results of this study indicate that ASD could be more effective for radon mitigation. Moreover, our findings would be background information in future for making the strategy for radon mitigation nationwide, as well as for developing Korean-version of mitigation techniques according to types of dwellings in Korea.

Associations of Dietary Calcium Intake and Serum Calcium Level with Blood Lead Levels in Korean Male Lead Workers

  • Kim, Hee-Seon;Song, Ok-Young;Kim, Kyung-Min;Lee, Sung-Soo;Young Hwangbo;Ahn, Kyu-Dong;Lee, Byung-Kook
    • Journal of Community Nutrition
    • /
    • 제3권2호
    • /
    • pp.96-102
    • /
    • 2001
  • A cross-sectional study was performed to estimate the nutritional status of Korean male lead workers and to assess the relationship between calcium nutritional status and blood lead levels. A flood consumption survey was conducted by the 24-hr recall method with 118 lead workers and 63 non-lead exposed controls. Blood lead levels were analyzed from whole blood and serum calcium concentrations were also assessed. Results of dietary analysis showed Korean lead workers consumed relatively sufficient nutrients (more than 75% of RDA) except, calcium. Mean dietary calcium intake of lead workers was 502.2mg(72% of RDA) while that of the non-lead workers was estimated as 600.8mg(86% of RDA). Intakes of protein, iron, niacin and vitamin C of lead workers were significantly lower than those of non-lead workers. There was a wide range of blood lead levels(5.5 to 73.5$\mu\textrm{g}$/㎗) observed while mean blood lead level of lead workers was 30.9$\mu\textrm{g}$/㎗. However, 98% of lead workers showed normal serum ca1cium concentrations (range ; 8.9 to 10.7mg/㎗, mean ; 9.77mg/㎗) while 66% of lead workers were estimated to intake a dietary calcium lower than 75% of RDA. Mean blood lead levels of non-1ead workers were significantly lower(mean ; 5.1$\mu\textrm{g}$/㎗, p < 0.001) and the serum calcium concentration was significantly higher(mean ; 10.20mg/㎗, p < 0.001) than lead workers. Results of unadjusted correlation showed that serum calcium level and dietary calcium intake were negatively correlated with blood lead concentration. In a multiple regression of blood lead levels with variables known as affecting blood lead 1eve1 such as age, body mass index and occupational lead exposure, serum calcium was insignificant while dietary calcium intake showed statistically significant(p < 0.05) relation. Since calcium is a very important nutrient to reduce hazardous effects of lead, it should be strongly recommended that lead workers need to increase dietary calcium intake.

  • PDF

연 취급 근로자들의 혈색소치의 변동 (Hemoglobin Concentration in Female Workers of Occupational Exposure to Lead)

  • 박난규;강복수;정종학
    • Journal of Yeungnam Medical Science
    • /
    • 제3권1호
    • /
    • pp.73-79
    • /
    • 1986
  • 연 폭로에 의한 조혈기능의 장해정도를 파악하고 연중독 환자를 조기에 발견하기 위하여 1985년 8월부터 1년간 경상북도 구미공단내 5개 산업장의 연취급 여성근로자 284명과 대조군 123명을 대상으로 혈중 연량콰 혈색소량을 측정하여 얻은 성적을 분석한 결과 다음과 같다. 연 취급 근로자의 평균연령은 $20.3{\pm}2.9$세이었고 대조군의 평균연령은 $21.1{\pm}3.5$세이었으며, 연작업자의 평균 근속기간은 $26.46{\pm}19.26$개월이었다. 연 취급 근로자의 평한 혈중연량은 $30.11{\pm}6.61{\mu}g/100ml$이었고 대조군의 경우 $21.86{\pm}3.75{\mu}g/100ml$로 두군 모두 정상범외내였으나, 폭로군이 대조군에 비해 유의하게 (P<0.01) 높았다. 연 취급 근로자의 평균 혈색소량은 $14.00{\pm}0.57g/100ml$이었고 대조군의 경우 $14.03{\pm}0.64g/100ml$로 정상치를 나타내었다. 혈색소치 12g/100ml이하는 한사람도 없었으며, 12.0~13.0g/100ml경우는 연 취급근로자에서 4.5%로 나타났다. 혈중 연량과 빈혈과의 용량-반응관계, 연령 및 근속기간과 혈중연량 및 혈색소치와의 사이에 유의한 상관관계를 관찰할 수 없었다. 이상의 성적으로 보아 작업장의 연 허용기준치를 넘지 않으면 장기간 근무하여도 연 중독의 피해가 없는 것으로 판단되기 때문에 작업장의 위생공학적인 환경관리가 무엇보다도 중요하다고 본다.

  • PDF

Concentration of Urinary Hippuric Acid in Toluene-Exposed Workers According to the Specific Characteristic of Work

  • Kwon, Se-Young;Na, Young-Ak;Kim, Sang-Rak
    • 대한임상검사과학회지
    • /
    • 제44권1호
    • /
    • pp.17-23
    • /
    • 2012
  • This study is assessed the urinary hippuric acid (HA) concentration in toluene-exposed workers. Toluene is widely used in the coating, printing, painting and petroleum industries. We analyzed the hippuric acid level of toluene-exposed workers (males: 198, females: 63) from 2008 to 2010 and examined the relationship between hippuric acid and the characteristics of their work. The measurements of the urinary hippuric acid were confirmed by high-performance liquid chromatography. Among the subjects, males had on average more work experience than females (males: 9.17 years, females: 4.45 years), but females showed a higher hippuric acid concentration levels than males (males: 0.26 g/L, females: 0.75 g/L). The mean of the HA concentration according to the age group was 0.19 g/L in 30's, 0.30 g/L in 40's, 0.54 g/L in 50's, 1.36 g/L in 60's. Those in their 60's had the highest concentration. The mean of HA concentration according to the type of work was 0.70 g/L for the coating, 0.52 g/L for the painting, and 0.16 g/L for the printing industries, revealing that the workers in the coating industry had the highest concentration. By the highest order, the mean of HA concentration by working period was as follows; less than 5 years, ${\leq}5\;years{\sim}<10\;years$. The factors that influence the HA concentration are not only how long one is exposed to toluene but also the type of work, worker's age, and their gender.

  • PDF

일부 업종의 용접흄 분석 및 폭로농도에 관한 연구 (A study on the airborne concentration of welding fume for some manufacturing industries)

  • 변상훈;박승현;김창일;박인정;양정선;오세민;문영한
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.172-183
    • /
    • 1995
  • The airborne concentrations of the welding fumes produced during $CO_2$ arcwelding process at shipbuilding, shiprepairing, container manufacturing and car accessary manufacturing industry were investigated. The effects how much reduced the welding fume were checked when the portable fan was used. The results were as follows; 1.The geometric mean of welding fume concentration in shipbuilding factory was $10.05mg/m^3$. This exposure concentration was higher than other 3 manufacturing industries at 95% confidence level. 2. The sampling filters for welding fume could be digested with acid within 1 hour by microwave oven. The recoveries for investigated metal elements were all over 95%. 3. The optimal wavelength could be selected for the simultaneous analysis of 8 metal elements by ICP(Inductively Coupled Plasma). 4. Noxious gases($O_1,NO_2$) produced during $CO_1$ gas arc welding process were detected that the concentration of ozone($O_1$) was less than 0.01 ppm and that of nitrogen dioxide($NO_2$) was 0.01-0.03 ppm. 5. The geometric mean of welding fume particle diameter was $1.26{\mu}m$ and geometric standard deviation was 1.51 for the counts when particle an analyzer(ELZONE) had been used. 6. When the portable fan had been used,the reduced percent of total welding fume for workers was about 47.8% when portable fan was applied to blow and 71.7% when to exhaust.

  • PDF

용접공에서 발생한 구리흄에 의한 금속열 1례 (A Case of Metal Fume Fever Associated with Copper Fume in a Welder)

  • 임현술;정해관
    • Journal of Preventive Medicine and Public Health
    • /
    • 제31권3호
    • /
    • pp.414-423
    • /
    • 1998
  • Metal fume fever has been known as an occupational disease is induced by intense inhalation of fresh metal fume with a particle size smaller than $0.5{\mu}m\;to\;1{\mu}m$. The fumes originate from heating metals beyond their boiling point, as happens, for example, in welding operations. Oxidation usually accompanies this process. In most cases, this syndrome is due to exposure to zinc oxide fumes; however, other metals like copper, magnesium, cadmium, manganese, and antimony are also reported to produce such reactions. Authors report a case of metal fume fever suspected to be associated with copper fume inhalation. The patient was a 42-year-old male and was a smoker. He conducted inert gas tungsten arc welding on copper-coated materials without safety precautions such as a protective mask and adequate ventilation. Immediately after work, he felt metallic taste in his mouth. A few hours after welding, he developed headache, chilling sensation, and chest discomfort. He also complained of myalgia, arthralgia, feverish sensation, thirst, and general weakness. Symptoms worsened after repeated copper welding on the next day and subsided gradually following two weeks. Laboratory examination showed a transient increase of neutrophil count, eosinophilia, elevated erythrocyte sedimentation rate, and positive C-reactive proteinemia. Blood and urine copper level was also increased compared to his wife. Before this episode, he experienced above complaints several times after welding with copper materials but welding of other metals did not produce any symptoms. It was suggested that copper fume would have induced metal fume fever in this case. Further investigations are needed to clarify their pathogenic mechanisms.

  • PDF

Molecular and Genomic Approaches on Nickel Toxicity and Carcinogenicity

  • Seo, Young-Rok;Kim, Byung-Joo;Ryu, Jae-Chun
    • Molecular & Cellular Toxicology
    • /
    • 제1권2호
    • /
    • pp.73-77
    • /
    • 2005
  • Nickel is the one of potent environmental, the occupational pollutants and the classified human carcinogens. It is a serious hazard to human health, when the metal exposure. To prevent human diseases from the heavy metals, it is seemingly important that understanding of how nickel exerts their toxicity and carcinogenic effect at a molecular and a genomic level. The process of nickel absorption has been demonstrated as phagocytosis, iron channel and diffusion. Uptaked nickel has been suggested to induce carcinogenesis via two pathways, a direct DNA damaging pathway and an indirect DNA damaging pathway. The former was originated from the ability of metal to generate Reactive Oxygen Species (ROS) and the reactive intermediates to interact with DNA directly. Ni-generated ROS or Nickel itself, interacts with DNAs and histones to cause DNA damage and chromosomal abnormality. The latter was originated from an indirect DNA damage via inhibition of DNA repair, or condensation and methylation of DNA. Cells have ability to protect from the genotoxic stresses by changing gene expression. Microarray analysis of the cells treated with nickel or nickel compounds, show the specific altered gene expression profile. For example, HIF-I (Hypoxia-Inducible Factor I) and p53 were well known as transcription factors, which are upregulated in response to stress and activated by both soluble and insoluble nickel compounds. The induction of these important transcription factors exert potent selective pressure and leading to cell transformation. Genes of metallothionein and family of heat shock proteins which have been known to play role in protection and damage control, were also induced by nickel treatment. These gene expressions may give us a clue to understand of the carcinogenesis mechanism of nickel. Further discussions on molecular and genomic, are need in order to understand the specific mechanism of nickel toxicity and carcinogenicity.

치과기공사의 근무 환경 및 업무특성 평가에 관한 연구 (A Study on Working conditions and Characteristics of Dental Technicians)

  • 송재상;홍영호;최상준
    • 대한치과기공학회지
    • /
    • 제33권4호
    • /
    • pp.379-390
    • /
    • 2011
  • Purpose: This study was conducted to improve the working conditions of dental technicians, through survey for working conditions related to perform one's duty, the extent of personal exposure to substances hazardous and complaint rate and factor of job stress and subjective symptom on musculoskeletal disorders. Methods: Using four types of structured questionnaires: social and demographic factor; the actual conditions of working space; working conditions; and characteristics of dental technicians, respondents filled in the questionnaires and the results were analyzed statistically. Results: The evaluation of comfort in working place found that satisfaction level on indoor noise was the lowest with 2.6 on a five-point scale and privacy space followed 2.8 point. In reasons for dissatisfaction with job, over workload ranked the highest by 25.4% and role overload had the highest by 39.5% in job stress factors. Based on the results, we could draw conclusion that dental technicians were unsatisfied with role overload and heavy workload a day. In reasons for musculoskeletal symptom prevalence, long-patient work was the highest by 24.1%. It was thought to cause dental technicians need deep procession and long-patient work due to the nature of their job. Conclusion: In conclusion, noise reduction and privacy space are required to improve job efficiency of dental technicians. In addition; we need to think of ways to increase the job satisfaction with adequate rest while deep procession and long-patient working.

Ecotoxicological Risk Assessment for Acetaminophen in Kyongahn River

  • Kim, Pan-Gyi
    • 한국환경보건학회지
    • /
    • 제32권5호
    • /
    • pp.440-445
    • /
    • 2006
  • 통증경감을 위하여 광범위하게 사용되는 acetoaminophen은 치통, 두통에 주로 사용되는 의약물질이다. 의약품의 환경오염과 관련하여 수자원에 유입되는 acetaminophen의 경안천 오염정도를 파악하고 생태 위해성을 평가하기 위하여 본 연구를 수행하였다. 한강 수계이며 용인시와 광주시를 거쳐 팔당호로 흘러 들어가는 경안천(해실교, 수포교, 왕산교, 경안교, 지월교, 광동교, 팔당호)내 acetaminophen 잔류 농도와 분포를 조사하였다. 또한 Daphnia magna를 대상으로 48시간 급성독성평가를 실시하여 위해도를 평가하였다. 잔류의약품 검출을 위해 SPE 추출법을 선택 하였으며, liquid chromatography/mass spectrometry (LC/MS)를 이용하여 분석하였다. 경안천 내에서 acetaminophen 0.439 mg/l이 검출되었다. 독성평가를 실시한 결과, 48시간 $LC_{50}$은 16.9 mg/l로 나타났다. 경안천의 acetamionophen 농도와 독성평가를 바탕으로 위해성 평가를 실시한 결과 위해성은 1 이하였다 하지만 국내에 의약품 발달과 함께 사용이 계속적으로 늘어나는 추세이고, 잔류의약품에 대한 대책이 마련되어있지 않은 이상 수환경은 의약품에 노출될 것이다. 그러므로 잔류의약품이 생태계에 악영향을 미치지 않도록 구체적인 방안이 강구되어야 할 것으로 사료된다.