• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.49-50
• /
• 2023

Asbestos is a building material that has been actively used because of its excellent durability and heat resistance until 2009, when it was found to be a first-class carcinogen and prohibited in Korea. Currently, asbestos dismantling is an essential process in demolition of old buildings. Workers are likely to be exposed to asbestos in the process of dismantling and removing them, which causes various occupational diseases, suggesting related laws and work standards to ensure the safety of asbestos dismantling process. Accordingly, prior studies have been conducted to analyze the level of asbestos exposure and influencing factors occurring during work, but most of them are mainly concerning health issue while research on process risks considering field characteristics and safety aspects of the work processes is still insufficient. Therefore, this study aims to derive the process risks affecting the safety of workers based on the survey results of asbestos dismantling companies, and further proposed a cost calculation model taking those risks into account.

• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• 방사선산업학회지
• /
• 제17권3호
• /
• pp.239-256
• /
• 2023

The classification of the radiation work performed in Korean nuclear power plants (NPPs) must be understood to provide workers with more comprehensive radiation protection. This study used annual reports on occupational exposure to investigate and analyze the similarities and differences in the radiation work performed in Korean NPPs with pressurized water reactors (PWRs) and pressurized heavy water reactors (PHWRs). The results showed that the radiation work performed in Korean NPPs could be classified into three categories. Category 1 contains work at the highest level. This work can be divided into individual tasks belonging to Category 2, which enables the evaluation of the radiation dose during the work. The work in Category 2 consists of tasks from Category 3, which contains basic detailed tasks that are not further subdivided. This study emphasized the need for the systematic management of the radiation work performed in both Korean PWRs and PHWRs, such as the tasks in Category 3, which are similar, with similar working conditions, for PWRs and PHWRs. It also suggested the need to establish a list of radiation work for decommissioning because Kori Unit 1 and Wolsong Unit 1 are currently in permanent shutdown and preparations are being made for their decommissioning.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.164-180
• /
• 1991

For the purpose of contributing to the promotion of health of the employees working at the same kind of department store or similar type of business and the people utilizing them and preparing the basic data for the establishment of mangagement measure by assessing the level of air pollusion at indoor and outodoor of four department store among the distribution service business in Pusan area, authors measured the concentration of sulfur dioxide, nitrogen dioxide, formaldehyde and total suspanded particle according to the measuring height of variable at indoor and outodoor from Aug. 1990. to sep. an. d Jan, 1991 to Feb.: for each two months in summer and winter, and studied by dividing the variable factor into atmospheric factor (temperature, humidity and air velociy) The results are as follows ; 1. The mean concentration of air pollutants at indoor to total subjects was nitrogen dioxide 31.1ppb, sulfur dioxide 51.7ppb, formaldehyde 162.lppb and total suspanded particle $67.7{\mu}g/m^3$, and it was higher in winter than in summer (P>0.05) 2. The mean concentration of formaldehyde to total subjects was higher indoors than outdoors (P<0.001), in case of nitrogen dioxide there was no significant difference and sulfur dioxide and total suspanded particle were higher outdoors than indoors (P<0.05) 3. The concentration of nitrogen dioxide and sulfur dioxide proved to be a adverse correlation, reducing with height. 4. According to the result questioned about the exposure concentration of pollutant and the general symptom caused by the pollutant, nitorgen dioxide and symptom proved to be a positive correlation (P<0.09).

• Toxicological Research
• /
• 제28권1호
• /
• pp.25-31
• /
• 2012

The purpose of this study was to determine the acute pulmonary toxicity of metallic silver nanoparticles (MSNPs, 20.30 nm in diameter). Acute pulmonary toxicity and body distribution of inhaled MSNPs in mice were evaluated using a nose-only exposure chamber (NOEC) system. Bronchoalveolar lavage (BAL) fluid analysis, Western blotting, histopathological changes, and silver burdens in various organs were determined in mice. Mice were exposed to MSNPs for 6 hrs. The mean concentration, total surface area, volume and mass concentrations in the NOEC were maintained at $1.93{\times}10^7$ particles/$cm^3$, $1.09{\times}10^{10}\;nm^2/cm^3$, $2.72{\times}10^{11}\;nm^3/cm^3$, and 2854.62 ${\mu}g/m^3$, respectively. Inhalation of MSPNs caused mild pulmonary toxicity with distribution of silver in various organs but the silver burdens decreased rapidly at 24-hrs post-exposure in the lung. Furthermore, inhaled MSNPs induced activation of mitogen-activated protein kinase (MAPK) signaling in the lung. In summary, single inhaled MSNPs caused mild pulmonary toxicity, which was associated with activated MAPK signaling. Taken together, our results suggest that the inhalation toxicity of MSNPs should be carefully considered at the molecular level.

• 한국발생생물학회지:발생과생식
• /
• 제13권4호
• /
• pp.321-327
• /
• 2009

망간은 정소 독성을 나타내며, 뇌기저핵에 작용하여 혈청 프로락틴의 농도를 증가시킨다. 그리고 혈청 프로락틴 농도 상승에 의한 과프로락틴혈증(hyperprolactinemia)은 정소의 정자 생성을 억제한다. 본 연구에서는 망간의 전신 노출이 흰쥐 정소의 정자 생산과 혈청 프로락틴 농도에 미치는 영향을 조사하기 위하여 실험동물을 대조군 $(0.0mg/m^3)$과 망간 노출군 (Mn $1.5mg/m^3$)으로 나누고, 노출군은 다시 노출 기간에 따라 4주와 13주 노출군 등 4군으로 분류하였다(n=10). 노출 기간에 따라 실험동물의 체중 변화와 사료 섭취량 등 일반적 소견 관찰, 혈액과 정소의 망간 농도, 정자의 수와 기형 등을 관찰하였다. 그리고 망간 노출에 따른 혈청 프로락틴 농도를 조사하여 망간 노출 조건에 따른 혈청 프로락틴 농도 변화 및 정소 독성을 조사하였다. 망간 노출 4주 및 13주군에서 노출기간에 따라 혈액 및 정소의 망간 농도가 유의하게 증가되었다. 대조군에 비하여 망간 노출군에서 노출기간에 따라 정자의 수가 감소되었으며, small head와 bent tail 등 기형 정자의 빈도는 증가하였다. 혈청 프로락틴의 농도는 망간 투여군에서 대조군에 비하여 유의하게 증가하였다. 그러나 실험동물의 체중 변화 및 사료 섭취량은 실험군간에 차이가 없었다. 이러한 결과들로 보아 $1.5mg/m^3$ 농도의 아만성 망간 노출은 흰쥐의 혈청 프로락틴 농도를 증가시키고, 정소 독성의 원인으로 추정된다. 그리고 전신 노출에 의한 망간의 흰쥐 정소 독성의 무유해영향농도(NOAEL)는 $1.5mg/m^3$ 이하로 예측된다.

• 한국산림과학회지
• /
• 제110권2호
• /
• pp.210-216
• /
• 2021

우리나라 모든 산업에서 근골격계질환은 작업자들의 안전에 큰 영향을 미치고 있으며, 산림작업은 산업안전보건법에 따라 근골격계 부담작업으로 분류된다. 특히 벌도 및 가지제거작업은 주로 인력작업으로 실시되고 있으며, 작업원의 안정성 확보를 위해 작업자세에 대한 평가가 필요하다. 따라서 본 연구는 체인톱을 이용한 벌도 및 가지제거작업의 작업자를 대상으로 세가지 인간공학적 분석 도구(OWAS, RULA, REBA)를 이용하여 위험도를 평가하고, 평가기법별 작업자세에 대한 영향인자를 분석하였다. 벌도와 가지제거작업자세의 위험도는 RULA, OWAS, REBA 순으로 높게 평가되었으며, 대부분 2-3단계로 작업자세의 즉각 변경조치는 요구되지 않았다. 하지만 벌도작업에서 허리와 다리를 굽힌자세와 가지제거작업에서 벌도목 위에서 작업하는 자세는 위험도가 매우 높게 분석되었다. 또한 벌도작업의 경우 산지경사, 가지제거작업의 경우는 지상에서부터 벌도목 높이가 작업위험도 평가에 영향이 높은 것으로 분석되었다. 따라서 산림작업에 있어서 작업자의 안전성을 확보하기 위해 작업부하가 낮은 자세(벌도작업: 쪼그리는 자세, 가지제거작업: 허리와 다리가 곧은 자세)로 작업하는 것이 바람직한 것으로 사료된다.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• 한국산업보건학회지
• /
• 제19권1호
• /
• pp.73-79
• /
• 2009

This study was undertaken to investigate the effects of single and combined exposure of toluene (T) and xylene (X) on the cytochrome-450(CYP)-mediated metabolizing capacity, induction of CYP isozymes and the excretion of their metabolites in urine. Animal were adults male Sprague-Dawley (SD) rats and divided into 4 groups such as control, T (treated with 63.7 mg/body kg), X (treated with 65.9 mg/body kg) and TX(T=X). Organic solvents was administrated by intraperitoneal injection for 3 days. The contents of protein and CYP in liver microsomes of control group were $16.48{\pm}0.56 mg/m{\ell}$ and $0.744{\pm}0.025$ nmol/mg protein, respectively, and they contents were significantly lower than in derived from treated groups (p<0.01). The activities of PROD and ${\rho}NPH$ were significantly higher in single treated groups than in control and combined group (TX). When Western immunoblotting were carried out with two monoclonal antibodies (MAb 1-98-1 and MAb 2-66-3) which were specific against CYP2B1/2 and CYP2E1, respectively, a strong signal corresponding to CYP2B1/2 was observed in microsomes obtained from rats treated with X and TX. The color density against CYP2E1 was slightly increased in T and TX groups compared with C and X groups. The amounts of urinary hippuric acid in T single treated group was $3.29{\pm}1.97$ g/g creatinine and TX combined group was $2.91{\pm}1.76$ g/g creatinine, but was not significant. However, amount of urinary methy hippuric acid in X single treated group ($1.62{\pm}0.72$ g/g creatinine) was significantly higher than TX combined group ($0.93{\pm} 0.63$ g/g creatinine)(p<0.01). These results suggested that CYP2E1 isozyme might be responsible for the metabolism of T, and CYP2B1/2 isozyme is for X. And also, difference of metabolites level between single and combined group may be speculated that the intermediates of T and X interacted each other in the process of their metabolite formation reaction.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.200-208
• /
• 2012

Objectives: This study investigated the performance of three separate units of a portable photoionization detector (PID, ppb-RAE 3000) for measuring volatile organic compounds (VOCs) in a laboratory. Methods: A laboratory evaluation of the accuracy, precision, and inter-instrumental variance of three separate units of a portable PID (ppb-RAE 3000) was performed. The evaluation was based on the preparation of a test air sample of known toluene or ethylacetate concentration in a Tedlar$^{(R)}$ bag. The test air sample was monitored and data were logged consecutively by the three PIDs. A certified gas of 50 ppm toluene was also monitored during the test to ensure the reliability of the generated test air sample. Four different concentrations ranging from 0.1 to 2 TLV were used and a series of five measurements for each concentration level was performed. The accuracy was evaluated using National Institute for Occupational Safety and Health (NIOSH) criteria. Results: The results from the oldest ppb-RAE3000 unit among the three test units generally fell outside the NIOSH recommended accuracy criteria of ${\pm}25%$, whereas the other two units produced results which were acceptable at, or greater than, 25 ppm of toluene, or 0.5 TLV. These units also met the NIOSH criteria for some ethylacetate measurements but the results were not consistent. Conclusions: Considering the inconsistent performance of these ppb-RAE 3000 units, this device may not be appropriate for use as an alternative to the standard measurement methods. However, it can serve good survey instruments to identify exposure sources or concentration profiles. For all applications, the ppb-RAE 3000 should be used with frequent calibration checks, additional validation using a reference material, and careful maintenance.