• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.70-74
• /
• 2013

The flash point is one of the most important physical properties to charaterize fire and explosion hazard of liquid solutions. The maximum flash point of liquid mixture is larger than those of the individual components. In this study, the flash points of 2-pentanol+acetic acid system were measured by Seta flash closed cup tester. This system exhibited the maximum flash point behavior. The flash points were estimated by the Raoult's law and the optimization methods using the van Laar and Wilson equations. The calculated values by optimization methods were found to be better than those based on the Raoult's law.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.47-51
• /
• 2013

The explosion limit is one of the major combustion properties used to determine the fire and explosion hazards of the flammable substances. The explosion limit of organic acids have been shown to be correlated the heat of combustion and the chemical stoichiometric coefficients. In this study, the lower explosion and upper explosion limits of organic acids were predicted by using the heat of combustion and chemical stoichiometric coefficients. The values calculated by the proposed equations agreed with literature data within a few percent. From the given results, using the proposed methodology, it is possible to predict the explosion limits of the other organic acids.

• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.13-19
• /
• 2020

The purpose of this study is to develop and apply a make-a-thon program based on engineering problem solving for science high school students and to analyze the changes of participating students. Through the consultation of teachers and experts, a team-based and student-driven engineering problem-solving-oriented make-a-thon program was developed. And, the program operated using KAIST's human and material resources for 51 students. Students composed of 12 teams studied 12 topics through an engineering problem-solving process, and the overall program satisfaction was very high, on average 4.62. Through this program, students' creative leader competency have been positively changed, especially in cognitive characteristics (diffusion thinking, problem solving ability) and social characteristics (pursuit of social values). Attitudes toward engineering also changed positively, especially in terms of difficulty of engineering, interest in engineering, gender role in engineering, and engineering and occupational factors. In conclusion, it was confirmed that this program is very effective for science high school students with high demand for engineering education.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.85-89
• /
• 2013

In the current domestic, many industrial accidents have happened. And these are analyzed according to several factors. But it is difficult that they evaluate their business safety. Thus, we conducted a study on business specific safety assessment techniques in order that business know their safety level and perform appropriative safety activities. Study methods are survey and AHP (Analytic Hierarchy Process). Each specific weighting factors to calculate the survey was conducted for safety and consulting experts (20 persons). Weight factor was used to AHP decision support as one of the ways through a number of alternatives to the ratings for the Minesota Multiphasic. Factors are each type of industry, specific industrial scale, disaster type and strength, worker age and tenure period, and region. First, survey was conducted with 20 professionals to estimate the weighting factors. Weights between factors using the AHP analysis tool based on the mean values were calculated. Second, last 3 years between the industrial accidents statistics were used to calculate the weights for each of the rating factors in the Occupational Safety and Health Agency. Grade weights between each factor which was based on the rating of each factor was calculated as the average of three years. Finally, the weights between each factor and the grade weights for each factor using the safety level of the enterprise were calculated so that you can evaluate the weighting.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.39-43
• /
• 2015

The flash point is the major property to characterize fire and explosion hazard of liquid mixtures. The flash point is the lowest temperature at which a liquid gives off enough vapor to form a flammable air-vapor mixture. The flash points of two aqueous mixtures, water-methanol and water-ethanol, were measured using Seta flash closed cup tester. A prediction method based on activity coefficient models, Wilson and UNIQUAC equations, was used to calculate the flash point. The calculated flash points were compared to the results by the calculating method using Raoult's law. The calculated values based on activity coefficients models were found to be better than those based on the Raoult's law.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.9-14
• /
• 2012

The objectives of this study were to compare the results of HSL (Health and Safety Laboratory) ramp test with perceived sense of slip onto the several different floor surfaces under contaminated conditions. There are a variety of approaches from biomechanical measurements to psychophysical test and human perception. However, controversies over these approaches still remain. Some widely accepted methods need to be improved. AHP (Analytic Hierarchy Process) was used to evaluate the perception of slipperiness of seven different floor surfaces under the contaminated condition with glycerol solution. Twelve subjects worn same footwear and walked with self-selected step and cadence along the test floors. The angle of inclination obtained for water wet condition using 5 l/min with HSL ramp test was compared to perception of slipperiness. The surface roughness ($R_z$) related very well both AHP (r=0.95) and ramp test (r=0.92). The high significant correlation (r=0.90) was found between AHP and HSL ramp test.The HSL ramp test values (Coefficient of Friction, COF) according to subjective evaluation were divided into two categories. There were high correlations between test results (subjective evaluation, HSL ramp test) and surface roughness in Rz. Perception rating obtained with AHP showed a high correlation with COF obtained with HSL ramp test.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.75-81
• /
• 2011

For the safe handling of cyclohexane, the explosion limit at $25^{\circ}C$ and the temperature dependence of the explosion limits were investigated. Flash point and AIT(autoignition temperature) for cyclohexane were experimented. By using the literatures data, the lower and upper explosion limits of cyclohexane recommended 1.0 Vol% and 9.0 Vol%, respectively. Moreover lower flash points of cyclohexane recommended $-20^{\circ}C$. It was measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for cyclohexane, and the experimental AIT was $255^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of cyclohexane is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.273-278
• /
• 2013

Objective: This study aims to analyze and evaluate fatigue in upper trapezius muscles of adults when inputting text on a smart phone, thereby examining the risk of cumulative trauma disorders in the musculoskeletal system of the upper extremity. Method: Forty-five healthy adults were divided equally into three groups: a smartphone group, a notebook group, and a desktop group. A surface electromyogram was placed on the upper trapezius muscle of each participant, after which they inputted text for ten minutes within an ergonomic setting; their side posture was recorded on video and analyzed. Results: The spectral edge frequency values for the smartphone group, as recorded from the upper right trapezius muscles on the surface electromyogram, showed a significant decrease(p<.05). Regarding the RULA, all three groups had results indicating "action level 2". Conclusion: All three groups had results indicating "action level 2" according to the RULA, which means that additional research on the posture of the participants while performing tasks is necessary, and their posture needs to be corrected. In particular, the smartphone group has the highest levels of fatigue in the upper trapezius muscles, suggesting that the task of inputting text on a smartphone is a high risk for causing cumulative trauma disorders.

• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.9-15
• /
• 2007

The purpose of this study was to investigate electromyographic activities of the flexor digitorum superficialis (FDS) and the flexor carpi ulnaris (FCU) by the shape of the ultrasound head. Twelve healthy subjects participated and performed ultrasound therapy with a round head and a long handled head during each 5-minute application. Electromyographic activities of the FDS and FCU were recorded by surface electrodes and normalized by maximal voluntary isometric contraction (MVIC) values. There was no difference in the muscular fatigue of FDS and FCU as determined by the shape of the ultrasound head (p>.05). Without the shape of head, the mean power frequency decreased with the time. There also was no difference in %MVIC of the FDS and FCU as determined by the shape of the ultrasound head (p>.05), but the force exerted exceeded 20%MVIC. There was however a significant difference in the amount of cumulative workload of the FDS and FCU as determined by the shape of ultrasound head (p<.05). The workload was however not affected by the shape of the ultrasound head. Constant static grasp of ultrasound transducer head during ultrasound therapy is considered a high risk factor of work-related musculoskeletal disease.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.153-159
• /
• 2014

Low back pain is one of major issues in musculoskeletal diseases mainly caused by MMH (Manual Material Handling) tasks. In Korea, the standards of NIOSH(National Institute for Occupational Safety and Health) Lift Equations in U. S. A. have been most widely used. However, there is no standard in case the height of one feet is higher than that of another one. Moreover, since the standards are developed in U. S. A., there are many limitations for the applicability of Korean workers. In this study, MVC(Maximum Voluntary Contraction) for four postures are measured and an empirical model based on SVR(Support Vector Regression) is constructed. Constructing SVR model, PSO(Particle Swarm Optimization) is employed to investigate the optimal parameters of SVR. The results show that the performance of this empirical model is approximately accurate, even if the deviation of experimental values is large due to the individual differences. This empirical model may contribute to establish the standards of MMH tasks in Korea.