• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.367-397
• /
• 1991

This study was aimed to investigate the occlusal plane inclination in relation to the skeletal and dental assessment measurements in order to provide a reference in orthodontic treatment planning as the occlusal plane should be reconstructed orthodontically or gnathologically. The sample consisted of 73 normal occlusions and 113 malocclusions of adults. The computerized statistical analysis of 38 occlusal plane's and 29 skeletal and dental measurements were carried out with SPSS. The conclusions were as follows; 1 In normal occlusion, COP-NaPog was average $83.63^{\circ}$ (2.44) and occlusal plane inclination had a strong negative correlation with SNB and FH-NaPog. 2. In normal occlusion, ArANS plane was nearly parallel to the occlusal plane. 3. In malocclusion, the larger the mandibular plane angle and the shorter the ramus height was, the more downward the occlusal plane had a tendency to tip anteriorly. 4. Occlusal plane was more horizontal in deep bite group, while it was steeper in openbite group. 5. The curve of Spee was severe in deep bite group but in openbite group mandibular occlusal plane showed average reverse curvature, where it was found that the configuration of the occlusal plane contributed to the excess or deficiency of anterior overbite.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.375-379
• /
• 2010

Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.333-354
• /
• 1990

This study was designed to analyse vertical dysplasia such as open bite or deep bite in persons with skeletal Class III malocclusion. The subjects consisted of 60 control patients, 40 Class III open bite patients and 40 Class III deep bite patients. The mean age was 19.8 years in the control group, 17.8 years in the Class III open bite group and 16.5 years in the Class III deep bite group. The results were as follows: 1. In Class III malocclusion patients, the characteristics of the vertical dysplasia are under the palatal plane. 2. In Class III malocclusion patients, the items showing the characteristics of the vertical dysplasia are mandibular plane angle, lower gonial angle, lower facial height, dental height & inclination of the upper first molar, interincisal angle, maxillary & mandibular occlusal plane angle. 3. In Class III malocclusion patients, LPFH/LAFH ratio shows the highest significance among the facial height ratios. 4. In Class III malocclusion patients, open bite group has a upward cant of maxillary occlusal plane & downward cant of mandibular occlusal plane. And deep bite group has a downward cant of maxillary occlusal plane & upward cant of mandibular occlusal plane. 5. In Class III malocclusion patients, the molar teeth of the open bite group are measially inclined and those of the deep bite group are upright.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.65-78
• /
• 1988

The development of good arch form, the orientation of the dentition with relation to the craniofacial skeleton and the establishment of correct relationship of axial inclination of upper and lower teeth are required in normal occlusion, but different teeth present different degrees of axial inclination. The purpose of this study was to investigate the axial inclination of upper and lower teeth by analyzing $45^{\circ}$ oblique and $90^{\circ}$ cephalometric roentgenograms of 35 Korean males and 34 females with normal occlusion. The obtained results were as follows: 1. Mean and standard deviation of mesiodistal axial inclination of upper and lower teeth related to palatal plane and occlusal plane were obtained. 2. Mesiodistal axial inclination of upper first premolar was nearly perpendicular to palatal plane, and the axis of lower first premolar was nearly perpendicular to occlusal plane. 3. There was no difference in the mesiodistal axial inclination of anteriorly positioned teeth between the three groups: third molar eruption into good alignment (Group 1), third molar impaction or partial eruption (Group 2), third molar agenesis (Group 3). 4. There were low correlationships only between the axial inclination of central incisor and the mesiodistal axial inclination of canine and first premolar, but no correlationships between central incisor and posterior teeth behind first premolar.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.391-403
• /
• 1993

For the purpose of investigating mesiodistal axial inclination of posterior teeth in normal occlusion group, open bite and deep bite group and investigating the correlationship between the axial inclination of posterior teeth and overbite of anterior teeth, a cephalometric study was performed on the subjects consisted of normal occlusion group(40), open bite group(71 : Angle's Class I, Class II, division 1 25, Class III 25) and deep bite group(64 : Angle's Class I 23, Class II, division 1 21, Class III 20). Mesiodistal axial inclination of posterior teeth to occlusal, mandibular and palatal plane were measured. The findings of this study were as follows : 1. Upper and lower posterior teeth were more mesially inclined to occlusal plane in open bite group than in deep bite group. 2. Lower posterior teeth were more mesially inclined in deep bite group than in open bite group in Angle's Class II, division 1 malocclusion but there were no significant differences in Angle's Class I and Class III malocclusion. 3. There was no significant correlationship between the axial inclination of posterior teeth to each plane and overbite of anterior teeth in open bite group. 4. There was a significant correlationship between the axial inclination of upeer and lower second premolar to occlusal plane and overbite of anterior teeth in Angle's Class I, Class II, division 1 and Class III malocclusion.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.255-268
• /
• 1998

This study was investigated to assess the difference of facial height and occlusal plane inclination between normal occlusion group and class II malocclusion group. The subjects consisted of 50 normal occlusion (male 25, female 25) and 50 class II(male 25, female 25) malocclusion patients. All subjects are adult. lateral cephalogram was taken with standard method traced, and digitized for each subjects. The computerized statiscal analysis was carried out with SPSS program. The results were as follows 1. In class II malocclusion group, variables significant different from normal occlusion group were as follows ; SN-FOP, FH-BOP, MP-BOP, AB-BOP, AB-FOP, Facial plane-BOP, FP-FOP 2. In class II malocclusion group, the posterior facial height -especially posterior lower facial height-was significantly smaller than normal occlusion group.(P<0.05) 3. In class II malocclusion group, the angles between occlusal plane and upper and lower incisor, the angle between upper molar and bisected occlusal plane were significantly larger than those of normal occlusion group. (P<0.05) 4. L1 to Mandibular plane (mm) was a unique factor of occlusal plane position that showed significant difference in class II malocclusion group. 5. The correlation between overbite and occlusal plane inclination existed in class II malocclusion group, but the correlation didn't exist in normal occlusion group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.420-430
• /
• 2008

Statement of problem & Purpose: Articulators are very important for education and overall clinical situation in the field of prosthodontics, however preexisting articulators are designed and built based on maxillofacial structures and mean values of mandibular movement of Western people. Purpose of this research is to find out a adequate basis for applicating these articulators, presently used for clinical education, for Korean. Material and methods: 59 Korean adults (41 males, 18 females), aged between 24 to 41, where selected for this study. Two pairs of both maxillary and mandibular models were made for each examinee. These models where attached to both KaVo PROTARevo 7 and Hanau Modular semiadjustable articulators by using facebow transfer, than sagittal condylar inclination, occlusal plane inclination and position of mandibular on the articulator where measured. Result and conclusion: 1. Mean sagittal condylar inclination for KaVo PROTAR semiadjustable articulator was $33.75^{\circ}$(standard deviation $12.46^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $40.72^{\circ}$(standard deviation $12.09^{\circ}$) for mean sagittal condylar inclination. 2. Mean occlusal plane inclination for KaVo PROTAR semiadjustable articulator was $-2.76{\circ}$(standard deviation $3.63^{\circ}$) meanwhile Hanau Modular semiadjustable articulator showed $11.87^{\circ}$ (standard deviation $3.63^{\circ}$) for mean occlusal plane inclination. 3. On the average center of the mandibular dentition were in the range of 5 to 7 mm of the central position of the articulator. Both anterior and posterior dentition were positioned at the center of the articulator vernacularly for KaVo PROTAR semiadjustable articulators, meantime for Hanau Modular semiadjustable articulator, anterior dentition was positioned 5 mm downwards and 3mm upwards for posterior dentition from vertically central position of the articulator.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.13-24
• /
• 1984

To Study the eruption pattern of the maxillary first permanent molar, the author took 266 cases of true lateral cephalogram (Male; 137 cases, Female; 129 cases) from 3 to 7 years old children and observed the vertical change and axial change. The following results were obtained: 1. The angle of axial inclination of the maxillary first permanent molar to the F-H plane increased gradually from age 3 to 7, except for age 6 in both sexes. There was a slight reversal of this motion at age 6. 2. The distance from the cusp of the maxillary first permanent molar to the occlusal plane slightly decreased from age 3 to 5, and rapidly decreased from age 5 in both sexes. 3. The change of angle of the axial inclination resulted in the distance from the distobuccal cusp of the maxillary first permanent molar to the occlusal plane decreasing more than that from the mesiobuccal cusp of the maxillary first permanent molar to the occlusal plane in both sexes. 4. The eruption of the maxillary first permanent molar generally was found to be earlier in girls than boys.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.705-717
• /
• 1995

In clinical prosthetic dentistry the occlusal planes were represented to the dental arch form sagittally and composed of the occlusion morphologically. From now on the determinations of the occlusal planes were done through the facebow transfer and the cephalometric radiography, but they were not exact method for the diagnosis of the stomagnathic function. The purpose of this study is to examine the sagittal characteristics of occlusal planes using panoramic view between the normal subjects and the subjects with stomatognathic dysfunction. 60 normal subjects and 16 subjects with stomatognathic dysfunction were slectec for this investigation. We measured the inclination of occlusal planes to Frankfurt Horizontal plane. The occlusal planes were divided into 4 groups : 1) The plane between the midpoint of upper central incisor and the mesiobuccal cusp of upper 1st molar, 2) The plane between the midpoint of upper central incisor and the mesiobuccal cusp of upper 2nd molar, 3) The plane between the midpoint of upper central incisor and the distobuccal cusp of upper 2nd molar, 4) The plane between the mesiobuccal cusp of 1st molar and the distobuccal cusp of 2nd molar. The results were as follows : 1) The occlusal planes could be determined very easy by using panoramic view, 2) Among the angles between the occlusal planes and the FH plane, the angles related with the 2nd molar were more steep than those of the 1st molar. The angle between the 1st molar and the 2nd molar is the most steep in the other angles. 3) In the angles between occlusal planes and FH plane, the subjects with stomatognathic dysfunction were more significant steep(p<0.05) than the normal subjects.