• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.299-308
• /
• 1996

In order to epidemiologically verify the tensile that cervical abfraction is developed from the tensile stress during lateral excursion, comparisons between the experimental group with cervical abfraction and the control group without cervical abfaction was made by exmining the occlusal wear and patterns from the dental cast. 1. The degree of occlusal wear in the experimental group with cervical abfraction was higher than that of control group without cervical abfraction.(p<0.05) 2. No significant difference in the occlusal wear pattern was found between the experimental group and the control group. 3. Higher degree of occlusal wear was found in the age group of abov 40 than that of below 40.(p<0.05) 4. There was a correlation between the degree of occlusal wear and the degree of cevical abfraction.(p<0.05) 5. There was a correlation between the age and the degree of cevical abfraction.(p<0.05) It can be concluded that occlusal stress is the etiologic factor of cervical abfraction, but no clear distinction was made between the relationship of tensile stress and cervical abfraction.

• 구강회복응용과학지
• /
• 제29권1호
• /
• pp.59-68
• /
• 2013

이 논문의 목적은 시간에 따른 교합의 변화를 측정할 수 있는 T-scan system을 이용하여 젊은 성인 남성(33명)정상교합에서의 하악골 측방운동 시 교합접촉 양상을 분석하는 것이다. 정해진 하악 위치에서의 교합접촉이 아닌, 기능적 범위 내에서 비작업측 교합이개 시점에서의 교합접촉 양상을 분류하고 분류된 군 간에 교합이개 시간, 측방유도 시 견치가 담당하는 교합력의 비율, 측방운동 시 가해지는 교합력 등을 비교하였다. 연구 결과 기존의 분류와는 다른 측방접촉들이 존재하였고 군기능 유도가 우세하게 나타났다. 교합이개 시간, 측방유도 시 견치가 담당하는 교합력의 비율, 측방운동 시 가해지는 교합력 등에서 군 간의 유의한 차이를 나타내었다. T-scan system은 교합접촉 양상을 분류하고 교합력, 교합이개 시간, 견치가 담당하는 교합력 비율 등의 항목을 비교 분석하는데 있어서 유용한 도구이다.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.598-614
• /
• 1998

This study was performed to investigate the influence of lateral guidance pattern and chewing pattern on masticatory muscle activity and occlusal contact pattern. Twenty-five patients with temporomandibular disorders and thirty students without temporomandibular disorders were selected for this study. Electromyographic examination and occlusal contact examination were performed simultaneously with Bio-Pak System (Bioresearch Inc.,U.S.A.) and T-Scan System(Tekscan Co., USA). The obtained results were as follows : 1. The EMG activity of masseter and anterior temporal muscle in patient group with canine guidance was higher than with non-canine guidance. but there was no significant difference (p>0.05). 2. The EMG activity of anterior temporal muscle in normal group with non-canine guidance was higher at preferred chewing side than at opposite side (p<0.05). 3. The EMG activity of masseter muscle was higher in normal group than in patient group (p<0.05). 4. The number of occlusal contact in patient group with canine guidance was higher than with non-canine guidance, but there was no significant difference (p>0.05). 5. The occlusal contact force at preferred chewing side was higher in patient group than in normal group(p<0.05).

• Journal of Oral Medicine and Pain
• /
• 제17권2호
• /
• pp.37-49
• /
• 1992

80 patients who presented at Wonkwang University Dental Hospital with craniomandibular disorders were collected for this study. To observe the occlusal contact pattern such as contact numbers, contact force and presence or absence of anterior occlusal contact, the author used T-Scan system (Tekscan, Inc, U.S.A.) with are computerized occlusal analysing system. And to study the correlation between craniofacial profile and occlusal contact pattern, cephalogram were also taken, The cephalometric items related to growth pattern, jaw bone relation and denture pattern were measured and analysed according to routine method by computerized program. The obtained data were statistically processed with SPSS/PC+ package about anterior contact pattern and its craniofacial relationship. The obtained results were as follows : 1. In terms of growth pattern, patients without anterior tooth contacts showed a tendency to downward growth of craniofacial profile. The value in this subjects were significantly different from the value of patients with anterior tooth contacts in items of low gonial angle, Jarabak ratio, SN to GoMe angle, FMA, occlusal plane to mandibular plane angle and ramus height. 2. In terms of jaw bone relationship, patients without anterior tooth contacts showed a tendency to backward growth of craniofacial profile. The value of this patients were significantly different from the value of patients with anterior tooth contacts in items of SNB, ANB, mandibular plane to anterior cranial base ratio, SNPo, NAPo and APDI items. 3. But in denture pattern, no statistically significant difference by the presence or absence of anterior tooth contacts were showed between this patients groups. 4. From this study, it could be proposed that anterior open bite in the patients with craniomandibular disorders would be originated from not dental discrepancy but skeletal discrepancy.

• Journal of Oral Medicine and Pain
• /
• 제15권1호
• /
• pp.117-124
• /
• 1991

The purpose of his study was to investigate the variations of occlusal contact pattern according to chewing side preference. The author selected 59 dental students (mean age 23.6 years) who had no signs and symptoms of masticatory disorders and divided into two groups, that is, bilateral chewing side group and unilateral chewing side group, respectively. For recording, T-Scan System(Teksan Inc., USA) was used and the recorded occlusal contacts were examined as to the number of occlusal contacts, points distribution in dental arch, time sequence and force snapshot. The obtained results were as follow s: 1. Total number of occlusal contacts were more in unilateral chewing side group and there were significant difference in number between right and left side or between chewing and less-chewing side in all two groups. 2. All items related to time sequence showed no statistical significant difference between two groups in any case. 3. Unilateral chewing side group had more occlusal contact force than bilateral group, especially in chewing side. From the above finding, the author considered that there was occlusal unbalance in unilateral chewing side group. 4. Chewing side preference would possibly have more effects on the occurrence rate of anterior tooth contact that the rate of prolonged their contact but proved.

• Journal of Oral Medicine and Pain
• /
• 제31권4호
• /
• pp.365-373
• /
• 2006

이 연구는 경찰사회에서의 측두장애환자의 교합상태를 평가하여 습관적인 최대교합시에 교합접촉 시기와 접촉수, 접촉힘을 분석하여 과도한 개구나 이악물기등의 악습관 교정을 제시 하는데 있다. 경찰사회에서는 일반 사회에는 다른 양상의 최대 개구, 습관적인 긴밀한 최대 교합상태 등으로 인하여 측두하악장애에 영향을 미칠 수 있다. 반복적인 훈련이나 일상생활에서의 변화는 그동안 유지되어 오던 저작근을 비롯한 악구강계 평형 상태에 변화를 초래하여 측두하악관절과 그에 따른 구조물에 동통을 유발 내지는 악화 시킬 수 있다. 본 연구는 측두하악장애에 영향을 미칠 수 있는 교합상태를 조사하기 위하여 T-scan II system(Tekscan Co., USA)을 이용하였으며, 최대 교합력을 발휘하기 위하여 약 20 mm 정도의 개구 상태에서 최대교합시까지 물었다. 경찰종사자의 측두하악장애환자는 일반 측두장애환자보다 최초 접촉부터 최대 접촉까지 걸리는 시간은 오래 걸리며, 최종 접촉까지의 시간은 보다 짧았으며, 최종 교합접촉력은 더 강하여, 더 짧은 시간에 강한 힘을 유지한 채 폐구가 이루어져 측두하악관절에 더 많은 잔존한 부하를 전달하였다. 이환 측과 교합접촉 시간, 교합 접촉 힘등의 교합양상과는 관계가 미약하였으며, 최대 접촉력이 가해진 시기에서 우측이 이환 측이면 우측 악궁에, 좌측이 이환측일 경우 좌측 악궁에 집중되는 좌, 우 악궁간 불균형을 보였다. 이상의 결과에서 측두하악장애를 가진 경찰 종사자들의 하악 운동에 보다 부드러운 움직임과 습관적인 최대 교합상태에서의 보다 적은 힘을 유지해야 할 것으로 생각되어진다.

• 대한치과교정학회지
• /
• 제40권5호
• /
• pp.304-313
• /
• 2010

본 연구는 한국인 정상교합자와 부정교합자 사이의 교합력의 크기와 교합 시의 접촉 면적의 차이 및 골격 형태와 교합 관계, 연령, 성별이 교합력의 크기에 영향을 미치는지 알아보기 위해 시행되었다. 정상교합자 15명, 부정교합자 636명에서 일회용 pressure sensitive sheet (Dental $Prescale^{(R)}$ 50H, typeR, Fuji Film Corp., Tokyo, Japan)를 자연 두부위에서 최대 근력으로 교합하도록 한 후, CCD camera ($Occluzer^{(R)}$ FPD 707, Fuji Film Corp., Tokyo, Japan)로 판독하여 교합력의 크기 및 접촉 면적을 측정하였다. 정상교합자군의 교합력의 크기는 $744.5{\pm}262.6N$, 접촉면적은 $24.2{\pm}8.2mm^2$으로, 부정교합자군의 $439.0{\pm}229.9N$, $12.4{\pm}10.7mm^2$에 비해 교합력의 크기와 접촉 면적이 유의하게 컸다 ($p$ < 0.05). 부정교합자군의 경우 연령에 따른 교합력의 차이는 없었으나, 남자가 여자에 비해 큰 교합력을 가지고 있었다 ($p$ < 0.05). 악안면의 전후방적인 골격 형태를 나타내는 ANB 및 골격성 1급 부정교합에서의 구치부의 Angle 분류는 교합력에 유의한 차이를 나타내지 않았으나, 수직적인 골격 형태를 구분하는 mandibular plane angle, gonial angle이 큰 경우, 교합력이 유의하게 작았다 ($p$ < 0.05). 하지만, 교합력의 크기와 접촉 면적간에는 높은 상관관계가 존재하는 점과 접촉 면적을 통제한 상태에서의 골격 형태와 교합력의 크기 사이에는 유의할 만한 상관관계가 없는 점을 고려한다면 수직적인 골격 형태가 직접적으로 교합력에 영향을 주기보다는 수직적인 골격 형태에 따른 접촉 면적의 감소가 교합력 저하에 관여한다고 판단된다.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the accuracy of single crowns based on the type of occlusal surface. Methods: A single crown wax pattern was fabricated in three types of occlusal surface. The prepared wax pattern was replicated with silicone, and stone was injected to create a stone model. The prepared specimens were scanned using a model scanner. Scans were classified into three groups, and each scan was performed six times to analyze the trueness and precision of a single crown. In addition, only the occlusal surface area was analyzed for trueness and precision. Data were analyzed using the Kruskal-Wallis H test, a nonparametric test (α=0.05). Results: With regard to the trueness value of the occlusal scan area, the no occlusal tooth attrition (NA) group showed the largest error of 3.5 ㎛, and the complete occlusal tooth attrition (CA) group showed the lowest value of 3.1 ㎛. The NA group had the greatest precision, and the medium occlusal tooth attrition (MA) group and CA group showed a low precision value of 3.2 ㎛; the difference between the groups was statistically significant (α=0.05). In the color difference map, the CA group showed a lower error than the NA group. Conclusion: The occlusal surface with severe attrition had excellent accuracy, but the accuracy of the group without attrition was low. There were significant differences between groups, but clinically acceptable values were shown.

• 대한치과의사협회지
• /
• 제53권6호
• /
• pp.418-426
• /
• 2015

The appropriate occlusion is one of the most important factors for the long-term success of implant and its restorations. The purpose of this review is to investigate and define occlusal considerations to reduce failure of implant prostheses. The physiological movement of implants is markedly lower than that of natural teeth and they also lack in occlusal sensitivity. Proper occlusal pattern may be assigned to compensate for the biological disadvantages and occlusal contacts must be formed where the cantilever effect is minimized. Moreover, the long-term success of implants after osseointegration can be assured by reducing early occlusal loading to avoid implant overloading and selecting appropriate occlusion material. Occlusal overload was brought by the number and location of occlusal contacts, which are under the clinician's control. The concept of implant occlusion is based on the concepts derived from traditional prosthetics. Moreover, there are few evidence on the concept or design of implant occlusion. Several occlusal design was recommended for implant prosthesis. Mutually protected occlusion, group function occlusion and bilateral balance occlusion was recommended for the specific types of implant restorations. This article reviews proper design of occlusion for implant restoration and offers occlusion strategy clinically.