• Journal of Nutrition and Health
• /
• 제11권1호
• /
• pp.17-20
• /
• 1978

The materials carcinogenic agent, nitrosoamine, is distributed in food circumstances, and is formed when both nitrite and secondary amine are present. Nitrites are added to fishes as a color fixative or preservative and secondary amines exist in fishes. In order to find the distribution and contents of secondary amines, analysis of 19 kinds of fish was conducted. The results showed that, significant differences were not observed in the quantity of secondary amines in 19 kinds of fish by district. The highest value was 20.29 ppm in Theragra chalocogramma and the lowest was 0.022 ppm in Ostrea denselamellosa. Six fishes below 1 ppm were Nibea imbricata, Misgurnus mizolepis, Astroconger myriaster, Evynnis Japonica, Ostrea denselamellosa and Solen gouldi. Dimethyl amine only was identified and diethylamine or diphenylamine was not detected in all kinds of 19 fishes.

• 한국대기환경학회지
• /
• 제5권2호
• /
• pp.72-83
• /
• 1989

Twenty-five atmospheric particulates were collected using a high volume aerosol sampler from Septermber to December, 1988 on a site located on the West coast of Korea and analysed for twelve elements (Na, Mg, Al, Mn, Fe, Cu, Co, Ni, Zn, Ag, Cd, and Pb) by AAS. The particles being mainly crustal minerals, large quantity of spherical fly ashes were also observed. In order to identify the origin of trace metals in atmospheric particulates, enrichment factor, interelemental correlation and factor analysis were performed. Based upon these analysis, the twelve elements can be classified into three groups; the elements dominantly present in soil particles (Al, Mn, Fe, Co, and Ni), those in sea salt aerosols (Na and Mg), and those in air pollution-derived particles (Cu, Cd, Pb, Ag and Zn).

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.453-456
• /
• 2002

In this study, the effect of DEM resolution (15m, 30m, 50m, 70m, 100m, 200m, 300m) on the hydrological simulation was examined using BASINS (Better Assessment Science Integrating point and Nonpoint Source) for Heukcheon watershed (303.3km2) data from 1998 to 1999. Generally, as the cell size of DEM increased, topographical changes were observed as the original range of elevation decreased. The processing time of watershed delineation and river network needed more time and effort on smaller cell size of DEM. The larger DEM demonstrated had some errors in the junction of river network which might effects on the simulation of water quantity and quality. The area weighted average watershed slope became lower but the length weighted average channel slope became higher as the DEM size increased. DEM resolution affected substantially on the topographical parameter but less on the hydrological simulation. Considering processing time and accuracy on hydrological simulation DEM mesh size of 100m is recommended for this watershed.

• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.651-655
• /
• 2000

Polymerase chain reaction (PCR) was used to specifically detect Phytophthora infestans by analyzing the sequences of the ribosomal internal transcribed spacer regions (ITS) in the rDNA of the Phytophthora species. Based on the sequence data, PISP-1 together with the ITS3 primer were used to detect p. infestans. A single ca. 450 bp segment was observed in P. infestans, but not in the other fungal or bacterial isolates. Two factors, the annealing temperature and template DNA quantity, were investigated to determine the optimal conditions. Using these species-specific primers, a unique band was obtained within annealing temperatures of $55^{\circ}C$-$61^{\circ}C$ and template DNA levels of 10 pg-100 ng.

• 오토저널
• /
• 제12권5호
• /
• pp.76-84
• /
• 1990

To study diesel fuel spray behavior, an experimental study was undertaken to investigate injection characteristics in vary ing back pressure and atomization mechanism in a non-evaporating diesel spray. Generally, injection characteristics is the curve of fuel flow plotted against time. The area under this curve is equal to the total quantity of fuel discharged for one injection. The method that measures rate of injection is long tube-type fuel rate indicator. Diesel spray injected into a quiescent gaseous environment under high pressure is observed by taking high speed camera by the focused shadow photographs. The results show that, at the start of injection, as the injected fuel rushes into the quiescent atmosphere the spray angle becomes large. Finally the spray stabilizes at a constant cone angle. Spray penetration length increases with the injection pressure.

• International Journal of Vascular Biomedical Engineering
• /
• 제4권1호
• /
• pp.17-26
• /
• 2006

Diabetes mellitus (DM) is a metabolic disorder, characterized by varying or persistent hyperglycemia, which induces several changes in the erythrocyte membrane and its cytoplasm, leading to alteration in the deformability. Techniques applied to measure this are based on filtration of erythrocyte suspension through a membrane and to obtain diffraction pattern under sheared conditions. Ektacytometry requiring less quantity of blood with disposable flow chamber used to measure the deformability of erythrocytes obtained from patients with diabetes and also associated with nephropathy and retinopathy. A decreasing trend of deformability in these patients is observed. The shape parameter form factor, as determined by image processing procedure, increases with the increased of blood glucose levels and shows a pattern similar to filtration time of erythrocyte suspensions through cellulose membranes. Further work is suggested to detect micro-level changes in cell membrane in diabetic patients

• 한국연초학회지
• /
• 제22권2호
• /
• pp.114-122
• /
• 2000

This study was carried out to investigate the changes in the composition of essential oils for the improvement of air-curing process of burley tobacco leaves. From the essential oils isolated from the cured tobacco leaves by steam distillation method, 90 compounds including 15 acids and esters, 19 alcohols, 23 aldehydes and ketones, 19 hydrocarbons, and 14 miscellaneous compounds, could be identified by gas chromatography and gas chromatography-mass spectrometry. Among them, acids and esters were gradually decreased during the progress of curing after harvesting. A rapid increase in alcohol content was observed in the earlier stage of curing, but thereafter, decrease followed until the end of curing However, aldehyde and ketone groups were continuously increased during curing and were 3 times higher in quantity after curing than at the harvesting time. The concentration of hydrocarbons was increased in the earlier stage of curing, but gradually decreased from the middle stage. The miscellaneous compounds were continuously increased in content until the end stage of curing, with rapid increased in the earlier stage of curing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.469-472
• /
• 2006

Amount used of admixture fare is increasing for concrete economic efficiency and ability security. Security of economic efficiency and ability can expect by use of this admixture fare but is displaying a lot of problems on early age strength hold by hydrate delay relatively. Specially, in the case of construction site, concrete strength can speak that interrelation is high with mold removal of forms time. Therefore, is economical and need examination of plan that can secure robber within 3 days using admixture fare such as fly ash and blast furnace slage differential speech to secure function. In this study, adding liquid admixture within 1% of a binding agent quantity to examine these problem with physical characteristic after hardening ago specially, strength change at standard and air dry curing of observed change in priority. Air dried and water curing total strength enhancement effects appeared by thing which is in case of add test result liquid admixture by below 1% and strength deputy by passage of age could know is not big.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.370-374
• /
• 2001

The degree of iron recovery from dust agglomerates was investigated experimentally to determine the optimum mixing ratio of coke in cold bonded pellet(CBP) which is fed into electric arc furnace(EAE) in the minimill plant. From the XRD analysis for EAF dust, magnetite(Fe$_3$O$_4$) and franklinite(ZnFe$_2$O$_4$) was identified as major components. Maximum iron recovery was obtained for the solid carbon content of approximately 18 weight percent. From plant trials of CBP composed of this optimal mixing condition, it was observed that electric power consumption and sulfur content increased with increasing the quantity of CBP.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.548-559
• /
• 1995

The purpose of this study was 1) to investigate the effect of drycleaning on the removal of microorganisms according to on the conditions or the kinds of drycleaning solvent about the Quantity of microorganism which remains in kinds of the drycleaning solvent and the sludge after drycleaning. 2) to investigate the removal effect of :microorganisms in using drycleaning solvent repeatedly 3) to investigate the kinds of microorganism living in textiles. The re, ;ultras of tai, ; study were as follows; 1) less microorganisms remains in perchloroethylen than in petroleum solvent. The most microorganisms was isolated at the beginning stage during the drycleaning. 2) In fresh drycleaning solvents, Pseudomonas aeruginosa ATTIC 27853, taphylococcsu atreus ATTIC 6538. and Candida albicans 10529 were killed immediately, while in case of pesters solvents used for 6 month-drycleaning, Pseudomonas Aeruginosa ATTIC 27853 were survived a lot of still in 17 days. 3) On the kind of bacteria in textile goods, Pseudomonas acidovorans and Ewsipelothrix rhusiopathiae are isolated. a genus Rhodetorula is observed through microscope. On the kind of fungi in textile goods, genus Penicillins and genus Apergillus are found through microscope, genus Caddie and genus Trichophyton are found with shapes.