• Journal of Multimedia Information System
• /
• v.5 no.4
• /
• pp.245-256
• /
• 2018

This study estimated rainfall information more effectively by image signals through the information system of weather radar. Based on this, we suggest the way to estimate quantitative precipitation utilizing overlapped observation area of radars. We used the overlapped observation range of ground hyetometer observation network and radar observation network which are dense in our country. We chose the southern coast where precipitation entered from seaside is quite frequent and used Sungsan radar installed in Jeju island and Gudoksan radar installed in the southern coast area. We used the rainy season data generated in 2010 as the precipitation data. As a result, we found a reflectivity bias between two radar located in different area and developed the new quantitative precipitation estimation method using the bias. Estimated radar rainfall from this method showed the apt radar rainfall estimate than the other results from conventional method at overall rainfall field.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.690-698
• /
• 1990

Among the target identification algorithms presented up to now, the NNR algorithm utilize multifrequency and single observation method. But it is generally known that its implementation is extremely difficult. In this paper a new identification algorithm using the single frequency and cumulative observation method was proposed. The simulation result shows that the proposed algorithm with 31 observation and accumulation is more effective and realizable than the NNR with 3 freqnencies when the noise level n is below 0.3.

• The Korean Journal of Applied Statistics
• /
• v.25 no.6
• /
• pp.1019-1026
• /
• 2012

This paper presents a method for the identification of "edge observations" located on a boundary area constructed by a truncation variable as well as for the identification of outliers and the after fit of multivariate skew $t$-distribution(MST) to asymmetric data. The detection of edge observation is important in data analysis because it provides information on a certain critical area in observation space. The proposed method is applied to an Australian Institute of Sport(AIS) dataset that is well known for asymmetry in data space.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.174-182
• /
• 2013

This study divided the observation area in an indoor space for area setup to analyse the effect of the difference of design types on the characteristics of observation with the observed time of each area as objects. Though it is thought that the difference of design patterns may be influenced by the factors and material composing the space, no existing approaches have had any quantitatively measuring method. Eye-tracking could be efficiently utilized for observation analysis from the viewpoint of dating observation behavior. The followings are the results of analysing the observation characteristics depending on design pattern. First, 5 observing areas were set up according to concentration of observation time in order for the concentration by area to be examined and the factors of design having effect on the difference of observation patterns by design type could be analysed. Second, as a whole, the observation of modern types showed high observation characteristics. When the difference of observation characteristics by pattern was examined by difference at observation frequency, the observation frequency defined to be more than 50% was seen to be almost same from Area I to III and to get higher from Area IV, and that defined to be 30% was high at Areas III and IV. In Area V, it was very high at natural. Third, that of Area II is no more than 8.2% but had the most observation time. As for observation characteristics, the horizontal observation of the central part was the highest and had more observation frequency at modern type that at natural one. These observation characteristics by area enabled to analyse the observation tendency depending on design characters at relevant area. Fourth, the design factors composing natural type were found to bring more attention when the area showed higher concentration at natural type than at modern one. And the analysis of design factors could make it to be confirmed that the quality of material and background factors in addition to design factors in the area had more effect on sight concentration.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.3-14
• /
• 2015

This study has extracted observation data by spatial factor for the analysis of subjects' selective attention with the objects of public space at the entrance of subway stations. The methods extracting observation data can be summarized as the following. First, the frequency analysis by lattice was prevalent for those methods, but there is a limitation to the analysis of the observation data. On the contrary, the method extracting observation data by factor applied in this study can make it clear if any sight is concentrated on any particular factors in a space. Second, the results from the extracted data corresponding to the observation area can be objectified while the method setting up the observation area by applying the radius of fovea. Third, time-sequential trace of observation results of relevant factors was possible through hourly analysis of spatial factors. The consideration of the results of "corresponding spatial scope" which is the object of this study will reveal that the more the observation time, the less the degree of attention it receives. Fourth, the frequency of observation superiority was applied for the analysis of the sections with selective attention by time scope; this revealed that men and women had intensive observation in time scope I (52.4 %) and in time scope IV (24.0 %), respectively.

• Journal of the Korean Statistical Society
• /
• v.18 no.1
• /
• pp.13-25
• /
• 1989

This paper suggests a classification rule with unequal covariance matrices when a patterned incomplete data are involved in the discriminant analysis. This is an extension of Geisser's (1966) result to the case of missing observations. For the calssificaiton rule, we introduce an algorithm which contains data augmentation step and Monte Carlo integration step and show that the algorithm yields a consistant estimator of true classification probability. The proposed method is compared to the complete observation vector method through a Monte Carlo study. The results show that the suggested method, in general, performs better than the complete observation vector method which ignores those vectors of observation with one or more missing values from the analysis. The results also verify the consistency of the algorithm.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.64-70
• /
• 1986

In this investigation x-ray diffraction method was mainly studied for quantitative analysis of clinker mineral composition. And also optical microscopic observation and Bogue calculation method were applied to compare with the x-ray diffraction method. In the procedure of x-ray diffraction analysis graphite monochromator automatic divergence slit and spinner for sample holder were used for minimizing the error due to the operation of the equipment. Especially the separation of overlapped peaks were proceeded by micro-processor automatically. The results of x-ray diffraction method for synthesized clinker were consistent with the Bogue value and the results of optical microscopic observation. However the results of quantitative analysis of mineral composition or commercial clinker containing solid solution of minor component were different from the Bogue value. On the other hand they agreed reasonably well with results of the optical mic-roscopic observation.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.79-88
• /
• 2008

Recently demands for the speech technology-based products targeted for the mobile terminals such as cellular phones and PDA are rapidly increasing. And voting-based speaker identification algorithm is known to have a good performance in the mobile environment, since it works well with small amount of speaker training data. In this paper, we proposed a method to improve the performance of this voting based speaker identification system by using the observation confidence value which is derived from the function of SNR each frame. The proposed method is evaluated with ETRI cellular phone DB which is made for the speaker recognition task. The experimental results show that the proposed method has better performance of 2-3% identification rate than the conventional GMM method.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.135-142
• /
• 2011

There occurs subtle shaking in our eyes while in looking at objects and this study sets up the standard of reconciliation from the property of observation and organizes the property of data reconciliation by the observation range to secure the feasibility of reconciliation range and method of the original data obtained from observation experiment and its analysis process. The results from above study can be concluded as in the followings: First, it made clear the process to exclude eye blink and data out of image range from the original data so to set up the range of available data. Second, on the basis of existing theory, it was possible to define the minimum attention time as 0.1 second (3 times of observation) and the visual understanding time of space as 0.3 second (9 times of observation) in the study on the property of observation, and this definition of observation time of sight fixation becomes an important indicator in the analysis of observation data. Third, based on the observation theory of continuity securing and attention, it was able to arrange the standard of reconciliation by carrying out reconciliation works only when fixed data with more than three times of observation showed consecutively before and behind the data with intermittent movements. Fourth, In the sector whether visual understanding occurred (more than 9 times), it increased by 12% for the frequency of observation and by 7.8% for the times of observation compared with the ones before the reconciliation. These results showed to have a constant change by subjects so that it was able to arrange a foundation to secure objective data in the analysis of the observation range and its extent.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.590-598
• /
• 2019

Aerial photographs taken by an image sensor fixed on a flight body, e.g. without a gimbal, are generally distorted according to its attitude, altitude and angle of view in flight. This can result in a significant difficulty of analyzing geometric information which should be integrated for numerous still frames. In this study, a simulation method of observation performance that uses geometric relationships between navigation data and image data is suggested, and this method is shown to be very useful for easily examining the integrated information such as the total range of photography, the time of target acquisition, etc.