• PNF and Movement
• /
• v.12 no.3
• /
• pp.167-171
• /
• 2014

Purpose: The purpose of this study was to show the effects of voluntary change of weight bearing on the vastus medialis oblique and the vastus lateralis ratio during squat exercise. Methods: Twenty-four healthy adults were recruited for this study. The subjects performed squat exercise with median weight bearing, lateral weight bearing and non-changed weight bearing. The muscle activities of the vastus medialis oblique and the vastus lateralis were measured during the squat for all three conditions. The measured data were analyzed using one-way ANOVA to investigate the effect of muscle activation on the each condition. The statistical analyses were performed using SPSS ver. 17.0, and a p-value of less than 0.05 was considered significant for all cases. A post-hoc test was performed using Tukey's test. Results: The study showed that the vastus medialis oblique and the vastus lateralis ratio significantly changed according to the voluntary change of weight bearing during a squat. The vastus medialis oblique and the vastus lateralis ratio significantly decreased under the condition of voluntary lateral weight bearing. Conclusion: We suggest squat exercise on median weight bearing to increase the vastus medialis oblique and the vastus lateralis ratio. If your patient has.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.1
• /
• pp.91-99
• /
• 2019

PURPOSE: This study was conducted to evaluate the activity of trunk muscles according to width of the foot and posture of the arm during sit to stand (STS). METHODS: Thirty subjects were recruited and examined for variation in muscle activity of the erector spine, gluteus maximus, gluteus medius and external oblique during different STS conditions; namely, the cross arm basic sit to stand (CBSTS), overhead basic sit to stand (OBSTS), cross arm wide sit to stand (CWSTS), and overhead wide sit to stand (OWSTS). Repeated measures ANOVA (Analysis of Variance) was used for analysis. RESULTS: Erector spinae muscle activity showed a significant increase in the OBSTS condition (p<.05) and external oblique muscle activity showed a significant increase in the OWSTS condition ((p<.05). There was no significant difference in the activity of the gluteus maximus and gluteus medius under any conditions (p>.05). CONCLUSION: During evaluation of the performance of the STS, the CWSTS condition will be useful to decrease the muscle activity of the erector spinae and the OWSTS condition will be useful to increase the muscle activity of the external oblique. The results of this study can be used as an index to find a suitable exercise method for subjects who have back pain or to strengthen the abdomen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.3
• /
• pp.576-585
• /
• 2002

A three-dimensional Lagrangian explicit time-integration finite element code for analyzing the dynamic impact phenomena was developed. It uses four node tetrahedral elements. In order to consider the effects of strain rate hardening, strain hardening and thermal softening, which are frequently observed in high-velocity deformation phenomena, Johnson-Cook model is used as constitutive model. For more accurate and robust contact force computation, the defense node contact algorithm was adopted and implemented. In order to evaluate the performance of the newly developed three-dimensional hydrocode NET3D, numerical simulations of the oblique impact of mild steel plate by mild steel sphere were carried out. Ballistic limit about various oblique angle between 0 degree and 80 degree was estimated through a series of simulations with different initial velocities of sphere. Element eroding by equivalent plastic strain was applied to mild steel spheres and targets. Ballistic limits and fracture characteristics obtained from simulation were compared with experimental results conducted by Finnegan et al. From numerical studies, the following conclusions were reached. (1) Simulations could successfully reproduce the key features observed in experiment such as tensile failure termed "disking"at normal impacts and outwards bending of partially formed plus segments termed "hinge-mode"at oblique impacts. (2) Simulation results fur 60 degrees oblique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is excellent. (3) Agreement with the experimental ballistic limit data, particularly at the high-obliquity impacts, is reasonably good. (4) The simulation result is not very sensitive to eroding condition but slightly influenced by friction coefficient.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.3 no.1
• /
• pp.39-49
• /
• 2003

The height provisions, by the urban planning, describe the hightest height per width division, also define oblique line limitation by road without mentioning the highest per width division. Therefore this study will be a basic model for the standard of measuring the highest height per width division analysizing the propriety of current standard of oblique limitation. This technique is prepared to prevent the confusion and to complements the existing planning method. Therefore, it takes more time to establish this new method and to apply it to the existing condition. This study reviewed density control in District Units Plan, based on the guidelines of density, which included height, ratio of total floor to ground area, and land distribution. This study aims to provide efficient analysis by using current oblique limitation provisions Thus, proving the area rations of general residential areas are decreasing. Since the purpose of the District Units Plan is to avoid confusion and help ease the existing problematic conditions which have risen from the two above-mentioned conventional systems, further observation and research on these areas are necessary.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2022

Objective: This study aimed to investigate the effect of the application of abdominal brace techniques on muscle activity of the trunk and lower extremities when walking. Design: Cross-sectional study Methods: This study was conducted on 26 healthy adults in their 20s, and the subjects performed two conditions in random order: walking with the abdominal bracing technique and walking in an abdominal relaxation state (normal gait). Muscle activity was measured on the dominant side of all subjects using surface electromyography, and the attachment sites were the erector spinae, external oblique, internal oblique, vastus lateralis, and vastus medialis oblique muscles. Each condition was measured three times to calculate and analyze the average value. Results: When walking using the abdominal brace technique, the muscle activity of the erector spinae, external oblique, internal oblique, and vastus lateralis increased significantly (p<0.05), and the muscle activity of the vastus medialis increased as well but was not significant. Conclusions: The results of this study indicate that it is possible to be used as an effective guide to increasing the muscle activity and stability of the trunk and lower extremities through the application of the abdominal bracing technique during walking.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1290-1295
• /
• 2012

Oblique astigmatism according to the rotation of the eye has to be removed for obtaining peripheral clear vision in ophthalmic lenses. For this reason, we calculated tangential and sagittal power using third-order approximation theory and then controlled conic constant for the difference of the two powers to converge to 0 regardless of the rotation angle of the eye. As a result, an aspherical ophthalmic lens without oblique astigmatism was designed. Also, we found optimal machining condition to the lens material using factorial design and finally fabricated the designed lens through ultra-precision machining with that condition.

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.2
• /
• pp.269-278
• /
• 1998

Let ($G,\;{\upsilon}$) be a bounded smooth domain and reflection vector field on $\partial$G, which points uniformly into G. Under the condition that locally for some coordinate system, ${\mid}{\upsilon^i}{\mid}\;i\;=\;1,{\cdot},{\cdot}$,d - 1, where is constant depending on the Lipschitz constant of G, we have tightness for reflected diffusion with jump on G with reflection $\upsilon$ depending only on c. From this, we obtain some properties of L-harmonic function where L is a sum of Laplacian and integro one.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.1
• /
• pp.1077-1083
• /
• 2017

The purpose of this study was to investigate the effects of stable and unstable bridging exercises on the EMG activity of abdominal muscles. Twenty healthy women participated in this study and the muscle activities of left-right rectus abdominis (RA), external oblique (EO), and internal oblique (IO) muscles were recorded during 4 bridging exercises (unilateral/ bilateral, stable/unstable). The activity of the right EO muscle was the highest during unilateral exercise in unstable condition, and left EO muscle also produced the same result. The activity of the right IO muscle was the highest during unilateral exercise in an unstable condition, and left IO muscle also produced the same result. The activity of the right RA muscle was the highest during unilateral exercise in a stable condition, and left RA muscle produced the same result. Unstable/unilateral (USUL) represented the highest activity among the 4 exercises. EO/IO muscles represented the highest activity during the USUL exercise, and RA did so during the stable/unilateral exercise. These results suggest that specific posture (USUL) can be administered targeting a specific side of abdominal muscles.