• Journal of Power System Engineering
• /
• v.7 no.4
• /
• pp.38-43
• /
• 2003

This paper proposes an optimum design problem of structural and control systems. taking a 3-D truss structure as an example. The structure is supposed to be subjected to initial static loads and time-varying disturbances. The structure is controlled by a state feedback $H_{\infty}$ controller to suppress the effect of the disturbances. The design variables are the cross sectional areas of truss members. The structural objective function is the structural weight. As the control objective, we consider two types of performance indices. The first function represents the effect of the initial loads. The second one is the norm of the feedback gain. These objective functions are in conflict with each other. Then, first, two control objective functions are transformed into one control objective by the weighting method. Next, the structural objective is treated as the constraint. By introducing the second control objective which considers the magnitude of the feedback gain, we can per limn the design which is robust in modeling errors.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.107-113
• /
• 2013

Problem solving and/or decision making process usually encountered in human living consists of a sequence of human behaviors based upon his/her knowledge. Thus, Rasmussen introduced Skill-Rule-Knowledge paradigm to countermeasure human errors that can occur in Nuclear Power Plants. Unfortunately however, it was not so easy as expected since objective evidence have not been obtainable with conventional research techniques. With the help of EEG band pawer ratio techniques, this study tried to get psycho-physiological symptoms of human errors, if any, while human beings perform knowledge-based behaviors such as simple arithmetic computations with different difficulty level. A set of simulated works was carried out with a computer station. Four kinds of arithmetic computation tasks were given to 10 health male under-graduate students on different day individually, and during the experiment, EEG and ECG was measured continuously for objective psycho-physiological analysis. According to the results, ${\alpha}$/(${\alpha}+{\beta}$) as well as ${\alpha}/{\beta}$ band power ratio were sensitive to task difficulty level which consistently decreased both. However, any one of them failed to reveal the influence of tasks with different difficulty level in the aspect of task duration time. On the contrary, Heart Rate Variability was more suggestive than expected. To make a conclusion, it can be said that band power of EEG waves will be helpful in not only assessment of work difficulty level but also assessment of workers' skill development if supported by cardiac function such as HRV.

• The Korean Journal of Pain
• /
• v.23 no.1
• /
• pp.35-41
• /
• 2010

Background: Statistical analysis is essential in regard to obtaining objective reliability for medical research. However, medical researchers do not have enough statistical knowledge to properly analyze their study data. To help understand and potentially alleviate this problem, we have analyzed the statistical methods and errors of articles published in the Korean Journal of Pain (KJP), with the intention to improve the statistical quality of the journal. Methods: All the articles, except case reports and editorials, published from 2004 to 2008 in the KJP were reviewed. The types of applied statistical methods and errors in the articles were evaluated. Results: One hundred and thirty-nine original articles were reviewed. Inferential statistics and descriptive statistics were used in 119 papers and 20 papers, respectively. Only 20.9% of the papers were free from statistical errors. The most commonly adopted statistical method was the t-test (21.0%) followed by the chi-square test (15.9%). Errors of omission were encountered 101 times in 70 papers. Among the errors of omission, "no statistics used even though statistical methods were required" was the most common (40.6%). The errors of commission were encountered 165 times in 86 papers, among which "parametric inference for nonparametric data" was the most common (33.9%). Conclusions: We found various types of statistical errors in the articles published in the KJP. This suggests that meticulous attention should be given not only in the applying statistical procedures but also in the reviewing process to improve the value of the article.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.4
• /
• pp.750-769
• /
• 2015

The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface). The Response Surface Method (RSM) is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN) which is considered as Neuro-Response Surface Method (NRSM). The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II). Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance), we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.66-72
• /
• 2003

This paper proposes an optimum, problematic design for structural and control systems, taking a 3-D truss structure as an example. The structure is subjected to initial static loads and time-varying disturbances. The structure is controlled by a state feedback H$_{\infty}$ controller which suppress the effects of disturbances. The design variables are the cross sectional areas of truss members. The structural objective function is the structural weight. For the control objective, we consider two types of performance indices, The first function represents the effect of the initial loads. The second function is the norm of the feedback gain, These objective functions are in conflict with each other but are transformed into one control objective by the weighting method. The structural objectives is treated as the constraint, By introducing the second control objective which considers the magnitude of the feedback gain, we can create a design to model errors.

• Proceedings of the KSPS conference
• /
• 2004.05a
• /
• pp.223-228
• /
• 2004

This study investigated the use of grammatical markers of Korean speaking children(from 3 to 8 years old) and adults. Participants had no problem of speech and language. In this paper we examined the usage of grammatical markers were increasing from 3 to 8 years old even though it was still increasing after 8 years old. Specifically, they used subjective marker and adverb marker at all ages in large. A few adjective marker were used at all age group including adults. But the frequency of objective marker is increasing from 3 to adults. The pattern of usage is getting similar to adult's. The present study was also designed to investigate the characteristics of children's errors of grammatical markers. Results showed that there were a little differences among the age-groups. The substitution errors were occurred most frequently in all age-groups.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.2
• /
• pp.127-138
• /
• 1999

For reverse engineering, curves and surfaces are modeled for new products by interpolating the digitized data points. But there are many measuring or deviation errors. Therefore, it is important to handle errors during the curve or surface modeling. If the errors are ignored, designer could get undesirable results. For this reason, fairing procedure with the aesthetics criteria is necessary in computer modeling. This paper presents methods of 3D NURBS curve fairing. The techniques are based on automatic repositioning of the digitized dat points or the NURBS curve control points by a constrained nonlinear optimization algorithm. The objective function is derived variously by derived curved. Constraints are distance measures between the original and the modified digitized data points. Changes I curve shape are analyzed by illustrations of curve shapes, and continuous plotting of curvature and torsion.

• ETRI Journal
• /
• v.24 no.5
• /
• pp.405-408
• /
• 2002

In this paper, we discuss recovery schemes for errors occurring when image data encoded with variable length coding (VLC) is transmitted through additive white Gaussian noise (AWGN) and multiple-access interference in direct sequence code division multiple access (DS/CDMA) systems. VLC such as JPEG is so sensitive to channel errors that severe degradation in decoded images occurs even if only one or two bits have errors. This is due to the loss of synchronization at the image decoder. We propose a resynchronization scheme using a power allocation method in wireless DS/CDMA transmission. Through simulation, we know that the proposed method has a more robust resynchronization capability and higher objective and subjective quality than the conventional method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.260-265
• /
• 1994

Efforts have been devoted to developing rapid and accurate methods for measuring the errors of machine tools. The method os measurement and calibration of machine tool errors should be general and efficient. The objective of this study is to show in detail the full sequence from the measurement of errors factors to the verification of the positioning accuracy after compensation for the volumetric error. In this paper, we described the steps in measuring the volumetric error parameters, a general error model composed of error parameters, temperature, and the desired position. The validity of the error calibration methods proposed in this paper was tested using a vertical 3-axis CNC machine with a laser interferometer and a ball bar.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.655-670
• /
• 2010

To be reversible as a data hiding method, the original content and hidden message should be completely recovered. One important objective of this approach is to achieve high embedding capacity and low distortion. Using predicted errors is very effective for increasing the embedding capacity. Sorting the predicted errors has a good influence on decreasing distortion. In this paper, we present an improved reversible data hiding scheme using upgraded histogram shifting based on sorting the predicted errors. This new scheme is characterized by the algorithm which is able to find the optimum threshold values and manage the location map effectively. Experimental results compared with other methods are presented to demonstrate the superiority of the proposed method.