• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1631-1633
• /
• 2004

The surge current characteristics of ZnO-$Pr_6O_{11}$-CoO-$Cr_2O_3-Dy_2O_3$-based varistors were investigated with various $Dy_2O_3$ contents. The sintered density decreased in the range of $5.2{\sim}4.6g/cm^3$ with increasing $Dy_2O_3$ content. The incorporation of $Dy_2O_3$ markedly enhanced the nonlinear properties of varistors above 10 times in nonlinear exponent, compared with the varistor without $Dy_2O_3$. The varistor ceramics doped with 0.5 mol% $Dy_2O_3$ exhibited the highest electrical stability. However, the remainder varistors resulted in thermal runaway due to low density of varistor ceramics. The clamping voltage ratio exhibited a minimum value of 2.03 in 1.0 mol% $Dy_2O_3$ at surge current of 100 A(8/20 ${\mu}s$).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.37-40
• /
• 2003

Amorphous $Al_2O_3$ nanotubes have been fabricated by utilizing the ZnO nanowires as template with wet etching method. ZnO nanowires synthesized by thermal evaporation are conformally coated with $Al_2O_3$ by atomic-layer deposition(ALD) method. The $Al_2O_3$-coated ZnO nanowires are of core-shell structure; ZnO core nanowires and $Al_2O_3$ shells. When the $ZnO/Al_2O_3$ core-shell structure is dipped in $H_3PO_4$ solution at $25^{\circ}C$ for a 6 min, the core ZnO materials are completely etched, and only $Al_2O_3$ nanotubes are remained. This nanotube fabrication is technically easier than others, and simply approachable. Transmission electron microscopy shows that the $Al_2O_3$ nanotubes have various thicknesses that can be controlled.

• 한국재료학회지
• /
• 제1권4호
• /
• pp.206-213
• /
• 1991

PbO 77-80wt%, ZnO 4.5-6wt%, $B_2O_3$ 7.5-8.5wt%, $TiO_2$ 3-7wt%, $P_2O_5$ 0.5-2wt%의 조성을 갖는 IC Package봉착용 저융점($400-460^{\circ}C$) 결정화유리 frit를 제조하였다. DTA-TMA, X-선 회절분석, SEM 등을 이용하여 봉착용 유리의 결정화 특성을 연구하였다. $TiO_2$ 함량이 3wt% 함유시료는 $420-440^{\circ}C$에서 $2PbO{\cdot}ZnO{\cdot}B_2O_3$의 결정이 균일성장하였다. $TiO_2$ 함량이 4wt% 첨가된 시료는 $420-440^{\circ}C$에서 $2PbO{\cdot}ZnO{\cdot}B_2O_3와\;PbTiO_3$ 결정이 섞여서 혼합결정을 이루고 있었다. 또한 $TiO_2$ 5wt% 첨가된 시료는 $440-460^{\circ}C$에서 perovskite $PbTiO_3$ 결정만 석출되었다.

• 산업기술연구
• /
• 제36권
• /
• pp.77-81
• /
• 2016

Superparamagnetic $Fe_3O_4$ nanoparticles with particle size from 10 to 20 nm were synthesized by coprecipitation method. Subsequently, the $Fe_3O_4$ nanoparticles were used to fabricate $Fe_3O_4/SiO_2$ core-shell nanoparticles by sol-gel method. The $Fe_3O_4/SiO_2$ nanoparticles synthesized by sol-gel method exhibit the high uniformities of particle size and shape. We also investigated the heating characteristics of $Fe_3O_4$ and $Fe_3O_4/SiO_2$ nanoparticles for biomedical applications. The $Fe_3O_4$ nanoparticles show the faster temperature increase and the higher specific loss power(SLP) value than the $Fe_3O_4/SiO_2$ nanoparticles.

• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.221-230
• /
• 1984

In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.61-69
• /
• 1995

$BaTiO_3$는 일반적으로 $BaCO_3$와 $TiO_2$의 고상반응으로 얻어지는데 BaO의 활성이 높고 이차상이 생성되므로 순수하게 합성하기가 어렵다. 순수한 $BaTiO_3$를 얻기 위해서 공침법, 가수분해법등이 연구되고 있으나 출발 원료가 비싸고 제조 공정상 문제로 고상반응으로 합성한 것과 별차이가 없다. 그래서 고상반응의 공정을 개선하는 연구가 다시 진행되고 있으며 본 연구에서도 $BaTiO_3$를 고상반응으로 합성할 때 물성에 좋지 않은 영향을 주는 이차상인 $Ba_2TiO_4$의 생성기구를 밝히고, 그것을 조절하려 했다. $BaTiO_3$의 이론조성중 Ba가 과잉인 영역에서는 $Ba_2TiO_4$가 $TiO_2$가 과잉인 영역에서는 $BaTiO_2O_5$와 $BaTiO_3O_7$이 소지의 팽창에 원인이 되었다. 환원에서 소결되는 $CeAIO_3$와 $BaTiO_3$계의 유전체는 공기중에서 $CeAIO_3$가 분해되고 이때 생성되는 $CeO_2$가 $BaTiO_3$의 전기적 물성에 큰 영향을 주었다.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.465-472
• /
• 1990

The effects of Al2O3 and Cr2O3 addition on the mechanical properties and microstructures of Y-TZP ceramics obtained by co-precipitation method of ZrO2＋3m/o Y2O3, following pressureless sintering at 150$0^{\circ}C$ for 2h were investigated. The addition of Al2O3 and Cr2O3 improved the Y-TZP sinterability and the Al2O3 addition showed the better effect on Y-TZP sintering than that of the Cr2O3 addition. The density and microstructure had the better effect on the bending strength of specimen more than stressinduced phase transformation (SIPT) of ZrO2 from tetragonal to monoclinic phase. The hardness of the specimens was found to be depend on the relative density and the fracture toughness of Y-TZP was found to rely on the amount of SIPT. The grian size of Cr2O3-doped Y-TZP was observed to be relatively smaller and had a narrower distribution than that of Al2O3-doped Y-TZP. If decomposition reaction of Cr2O3 can be controlled at high temperatures, it is anticipated that the mechanical properties of Y-TZP can be much improved by the Cr2O3 addition.

• 자연과학논문집
• /
• 제8권2호
• /
• pp.111-118
• /
• 1996

$Na_2O$-CaO-$SiO_2$ 계 유리의 화학적 내구성을 향상시키면서 작업점도의 변화를 최소화 하기 위하여, 기본 조성 유리를 선정한 후, 이 조성에 $B_2O_3$, ZnO 성분의 첨가량을 변화시키고 $Na_2O$, $Al_2O_3$, $Li_2O$ 성분을 변화시켜가면서 각 성분이 물성에 미치는 영향을 조사하여 최적 조성비를 얻는 것을 목적으로 하였다. 본 실험결과 $Na_2O$-CaO-$SiO_2$계 유리에서 연화점 변화를 최소화하고 화학적내구성을 극대화 시키는 최적조성(wt%)은 다음과 같았다.$B_2O_3$:3.36%, ZnO:2.88%, $Na_2O$:9.93%, $Al_2O_3$, $Li_2O$:0.19%, $SiO_2$:70.56%, CaO:11.22%, $K_2O$:0.14%

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.35-40
• /
• 1985

The composition of the base glass was determined to be $Na_2O$ 15, $Fe_2O_3$ 35, $B_2O_3$ 0~20, $P_2O_5$ 30~50 by mole percent. The heating temperature for nucleation was determined by means of thermal expansion curve. Crystalline phases were investigated by X-ray diffraction method and I.R Spectra. Electrical conductivities of glass spec-imens were observed in the temperature range 25~20$0^{\circ}C$ The activation energies of these specimens were caculated. The results obtained were as follows : 1) The limit composition of the melts 15mol% $Na_2O$ 35mole% $Fe_2O_5$ 20mole% $B_2O_3$ 30mole% $P_2O_5$ was able to be formed into desired shapes during cooling, . 2) In the measurement of d. c conductivity($\delta$) on the glasses in the system $15Na_2O-35Fe_2O_3$-$B_2O_3$-(50-x) $P_2O_5$ the values decreased by replacing 5 mole% $P_2O_5$ with $B_2O_3$ 3) The d. c conducties of heat treated samples were increased by replacing $P_2O_5$ with $B_2O_3$ 4) $B_2O_3$ contributed to precipitate crystals such as${\gamma}$-$Fe_2O_3$ $Fe_3O_4$ which had the advantage of electronic conduction in heat treated samples. 5) The slope plotted Log($\delta$) versus 1/T in this glass system was linear in the measured temperature range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.94-96
• /
• 2002

The $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%) were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD and SEM. According to the X-ray diffraction patterns of the $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), the ilmenite $MgTiO_3$ and perovskite $SrTiO_3$ structures were coexisted and secondary phase $MgTi_2O_5$ were appeared. Increasing the sintering temperature. the grain size was increased. In the case of $0.97MgTiO_3-0.03SrTiO_3$ ceramics with $B_2O_3$(10wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency were $13.52{\sim}18.13,\;32750{\sim}51736GHz$, $-15.78{\sim}25.64ppm/^{\circ}C$, respectively.