• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.297-299
• /
• 1999

Effects of additives on the ceramic and electrical properties of Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$ceramics in a perovskite type structure were investigated. The dielectric and piezoelectric properties of the base composition were improved markedly through selection of Fe$_2$O$_3$ additives in proper amounts. The composition Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$ obtained the dielectric constant ($\varepsilon$$_{r}$=1,425). Also, electromechanical couping factors for planar(k$_{p}$) and piezoelectric constant(d$_{33}$) were obtained 0.50 and 294[pC/N] at the additives 0wt% Fe$_2$O$_3$ respectively. The mechanical quality facor(Q$_{m}$) of Pb(Y$_{1}$2/Ta$_{1}$2/)O$_3$-PbZrO$_3$-PbTiO$_3$+Fe$_2$O$_3$(0.3 wt%) is about 510.510.510.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.104-114
• /
• 1994

ZrO2 fibers were fabricated by means of the Sol-Gel process using Zr(O-nC3H7)4-H2O-C2H5OH-HNO3 solution as a starting material. The optimum experimental parameters such as molar ratio of starting materials, concentration, temperature, viscosity, the amounts of stabilizer and the pH of solution were determined. The experimentally determined optimum variables which produce good ZrO2 fibers were used to manufacture the Y2O3-and CaO-ZrO2 fibers. The amounts of Y2O3 and CaO were varied within the range from 1.5~5 mol% and 3~15 mol% respectively. The phase transformation and microstructural evolution of the fabricated ZrO2 gel fibers were investigated after heat treatments up to 120$0^{\circ}C$ by X-ray diffraction, Raman microprobe spectroscopy, SEM, and specific surface area and pore volume measurements. From the analysis of X-ray diffraction and Raman spectra, the phase of heat treated Y2O3-and CaO partially stabilized ZrO2 gel fibers(Y2O3:2.5~3 mol%, CaO:6~9 mol%) were identified as a tetragonal phase up to 100$0^{\circ}C$. The maximum tensile strength of 2.5Y2O3-97.5ZrO2 and 6CaO-94ZrO2 (in mol%) fibers heat treated at 100$0^{\circ}C$ for 1 hr was found be 1.3~2 GPa with diameters of 10~20 ${\mu}{\textrm}{m}$.

• 한국재료학회지
• /
• 제11권6호
• /
• pp.498-501
• /
• 2001

0.9Pb($Mg_{1/3}Nb_{2/3}$)$O_3$-0.1Pb$TiO_3$계 완화형 강유전체에서 MnO$_2$ 첨가가 압전물성에 미치는 영향을 강유전성이 우세한 온도영역인 -40~3$0^{\circ}C$의 온도범위에 걸쳐 조사하였다. MnO$_2$ 첨가에 의한 효과를 유전특성, 압전특성, 전계유기 변형특성 등의 영역에서 고찰하였다 MnO$_2$ 첨가량이 증가할수록 유전성 및 압전성은 hard piezoelectric의 경향을 나타내었다. 이러한 실험적 고찰로부터 첨가된 Mn은 강유전 도메인 분역을 고정하는 역할을 하는 것으로 제안되었다.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.235-241
• /
• 1996

In this paper dielectric and electrostrictive strain properties of (1-y-x)Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_{3}$-PbTiO$_{3}$$-yPbTiO_{3}-xSrTiO_{3}[(1-y-x)PMN-yPT-xST]$ ceramics fabricated by using columbite precursor method have been investigated with the substitution of SrTiO$_{3}$(ST). Dielectric constant of the specimens increased with the increase of ST content up to 5[m/o] and decreased with further substitution of ST. And the pyrochlore phase decreased with the increase of ST content up to 5[m/o] in XRD analysis. The elimination of the pyrochlore phase improved dielectric constants. The electrostrictive strains generated by AC electric field have the highest value at 5[m/o] SrTiO$_{3}$ addition and the hysteresis of strain ranged from 12 to 20[%]. The electrostrictive strain at various temperature investigated in the temperature range of $-50[^{\circ}C]~74[^{\circ}C].$ In higher temperature than phase transition region, it showed paraelectric property which shows very small hystersis.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.139-145
• /
• 1989

An eutectic melt in the system(Bi2O3)0.85·(Nb2O5)0.15-6Bi2O3·SiO2 was unidirectionally solidfield at a rate of 0.5mm/h under a thermal gradient of 100℃/cm. Double crucibles and seed crystal plate were used in order to botain the composite crystals which had uniform microstructure throughout the ingot. The obtained composite crystals showed uniform microstructure, in which needle-like δ-(Bi2O3)0.85·(Nb2O5)0.15 crystals were arrayed in parallel in a matrix of γ-6Bi2O3·SiO2 single crystal. It was found that the <110> direction of δ-(Bi2O3)0.85·(Nb2O5)0.15 crystal was essentially parallel to the <111> direction of γ-6Bi2O3·SiO2 crystal in the composite crystals. A transverse thin plate of the composite crystals showed a high resolution optical transmission like an optical fiber array, and sharp chatoyancy was observed in the cabochon shaped composite crystals. Then, this may be useful for applications such as screen of a cathode ray tube or artificial cat's eye gem stones.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.435-435
• /
• 2011

The electronic structure and various physical properties of CeO2, Ce2O3, PrO2, and Pr2O3 have been studied from the framework of Ab-initio by the all-electron projector-augmented-wave (PAW) method, as implemented VASP (Vienna Ab-initio Simulation Package). The generalized gradient approximation (GGA) with effective U (Ueff) has been used to explain the strong on-site Coulomb repulsion among the localized Ce 4f electrons. The dependence of selected observables of these materials on the Ueff parameter has been scrutinized. The studied properties contain lattice constants, density of states, and reaction energies of CeO2, Ce2O3, PrO2, and Pr2O3. For CeO2 and PrO2, the GGA(PBE)+U results are in good agreement with experimental data whereas for the computational calculationally more demanding Ce2O3 and Pr2O3 both approaches give comparable accuracy. This results represent that by choosing an appropriate Ueff it is possible to reliably describe structural and electronic properties of CeO2, Ce2O3, PrO2, and Pr2O3, which enables modeling of oxygen reduction reaction processes involving ceria-based materials.

• 한국재료학회지
• /
• 제22권5호
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• 멤브레인
• /
• 제25권2호
• /
• pp.115-122
• /
• 2015

졸겔법에 의해서 trimethylborate (TMB)/tetraethylorthosilicate (TEOS) 몰비 0.01, 온도 $800^{\circ}C$에서 $SiO_2{\cdot}B_2O_3$가 제조되었다. 그리고 제조된 $SiO_2{\cdot}B_2O_3$와 PDMS[poly(dimethylsiloxane)]로부터 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막을 제조하고 막의 물리화학적 특성을 TG-DTA, FT-IR, BET, X-ray, SEM에 의해 조사하고 그리고 $H_2$와 $N_2$의 투과도와 선택도를 조사하였다. TG-DTA, BET, X-ray, FT-IR 측정에 의하면 $SiO_2{\cdot}B_2O_3$는 무정형의 다공성 $SiO_2{\cdot}B_2O_3$였으며, 기공의 평균직경은 $37.7821{\AA}$, 표면적은 $247.6868m^2/g$이었다. TGA 측정에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$가 첨가되었을 때 PDMS-$SiO_2{\cdot}B_2O_3$ 복합막의 열적 안정성은 향상되었다. SEM 관찰에 의하면 $SiO_2{\cdot}B_2O_3$는 약 $1{\mu}m$ 크기로 PDMS 내에 덩어리 상태로 뭉쳐서 분산되어 있었다. 기체투과실험에 의하면 PDMS 내에 $SiO_2{\cdot}B_2O_3$ 함량이 증가하면 $H_2$와 $N_2$의 투과도는 증가하였고, 질소보다 Lenard Jones 분자지름이 작은 $H_2$의 투과도는 $N_2$의 투과도보다 컸으며, 선택도($H_2/N_2$)는 감소하였다.

• 대한화학회지
• /
• 제46권4호
• /
• pp.336-345
• /
• 2002

본 연구에서는 조합화학을 이용하여 $CaO-Gd_2O_3-Al_2O_3$계에서 $Eu^{3+}$와 $Tb^{3+}$활성 적색 및 녹색 PDP용 형광체를 탐색하였으며 탐색된 형광체의 합성온도, 최적조성,발광 특성 등을 조사하였다. $CaO-Gd_2O_3-Al_2O_3$의 삼성분계의 형광특성 라이브러리를 작성하기 위하여 210개의 다른 조성을 가진 시료를 고분자 착체 중합법으로 합성하였다. 합성된 형광체 분말을 VUV PL로 측정하여 형광 특성 라이브러리를 작성하였고 발광특성이 잘 나타난 시료를 XPD를 이용하여 결정 구조를 확인하였다. 적색 형광체로서 탐색된 $Ca_{\alpha}$G$d_{0.95-\alpha-\beta}$$Al_\beta$$O_\delta$ : Eu(0.02< $\alpha+\beta$ <0.04)형광체는 색순도 면에서 상용형광체보다 개선된 특성을 보였으며 녹색 형광체로서 탐색된 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb, $Gd_4Al_2$$O_9$ : Tb, $Gd_3Al_5$$O_{12}$ : Tb 형광체 중에서 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb형광체는 상용 형광체에 비해 잔광시간이 짧은 특성을 보였다

• 한국재료학회지
• /
• 제4권2호
• /
• pp.159-165
• /
• 1994

순수한 알루미늄을 양극산화한 $AI_2O_3/AI$ 소자 및 그 위에$SnO_2$를 증착, 소자를 제작하여 그들의 전기적인 특성을 여러 습도 분위기 중에서 조사하였다. 단위습도당의 표면저항 변화는 $AI_2O_3/AI$ 소자에서는 $1.40 \times 10^{-2}\Omega$ /RH이었다. 두 소자는 습도에 따른 표면저항 변화중에서 hysteresis현상을 나타내고 있지만, $SnO_2-AI_2O_3/Al$ 소자쪽이 더 작은 hysteresis현상을 나타내었다. $SnO_2-AI_2O_3/Al$ 소자에 있어서 표면저항에 대한 온도의존성은 40-$60^{\circ}C$에서 $2.50 \times 10^{-2} \Omega /^{\circ}C$인것에비해 0~$20^{\circ}C$에서는 $0.56 \times 10^{-2} \Omega /^{\circ}C$와 같이 적기 때문에 $SnO_2-AI_2O_3/Al$ 소자는 실온영역에서 습도센서로 쓸 수 있다고 결론할 수 있다.