• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.236-248
• /
• 2020

Objectives: The purpose of this study was to evaluate the concentrations of particulate matter generated during coffee roasting and to study various factors affecting the concentrations. Methods: Differences in concentration levels were investigated based on various factors to understand the emission rates of particulate matter over time and to compare the mass and number concentrations according to their size. Sampling was performed in closed laboratories without the operation of air conditioning or ventilation. Optical Particle Sizer(OPS) was used as a measuring device. An OPS measures using a light-scattering method. Sampling was performed for sixty minutes at one-minute intervals. The background concentration was measured for about 30 minutes before starting of coffee roasting. The concentrations of particulate matter generated during coffee roasting were monitored until roasted coffee beans were removed from the roaster and cooled down. Several factors affecting the concentrations of particulate matter were investigated, which includes the origins of green beans, the roasting level, and the input amount of green beans. Results: The results of this study may be summarized as follows: 1) There was no difference in particulate matter concentration levels by the origin of the green beans, but a statistically significant difference in concentration levels by roasting level and the input amount of green beans; The higher the roasting level, the higher was the particulate matter concentration. The more green beans we put in the roaster, the higher were the concentrations; 2) The PM10 mass concentrations increased over time. The average concentration after roasting was higher than the average concentration during roasting; 3) In the distribution of mass and number concentration by particle diameter, the majority of particles was below 2.5 ㎛. Conclusions: Persons who work in roastery cafes can be exposed to high concentrations of particulate matter. Therefore, personal exposure and risk assessment should be conducted for roastery cafe workers.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2018

Purpose: Extremely hazardous pesticides are classified as World Health Organization (WHO) hazard class Ia. However, data describing the clinical course of WHO class Ia OP (organophosphate) poisonings in humans are very scarce. Here, we compare the clinical features of patients who ingested hazard class Ia OPs. Methods: This retrospective observational case study included 75 patients with a history of ingesting ethyl p-nitrophenol thio-benzene phosphonate (EPN), phosphamidon, or terbufos. The patients were divided according to the chemical formulation of the ingested OP. Data regarding mortality and the development of complications were collected and compared among groups. Results: There were no differences in the baseline characteristics and severity scores at presentation between the three groups. No fatalities were observed in the terbufos group. The fatality rates in the EPN and phosphamidon groups were 11.8% and 28.6%, respectively. Patients poisoned with EPN developed respiratory failure later than those poisoned with phosphamidon and also tended to require longer mechanical ventilatory support than phosphamidon patients. The main cause of death was pneumonia in the EPN group and hypotensive shock in the phosphamidon group. Death occurred later in the EPN group than in the phosphamidon group. Conclusion: Even though all three drugs are classified as WHO class Ia OPs (extremely hazardous pesticides), their clinical courses and the related causes of death in humans varied. Their treatment protocols and predicted outcomes should therefore also be different based on the chemical formulation of the OP.

• Journal of Trauma and Injury
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2019

Purpose: Penetrating vascular trauma though less common poses a challenge to all Surgeons. This study was designed to analyse the profile, management modalities of vascular trauma and the outcomes thereof at a Trauma Care Centre in a Tertiary care setting in hostile environment in India. Methods: A prospective review of all patients with arterial and venous injuries being transferred to the Trauma Center at out Tertiary Care Center between June 2015 and May 2018 was done. Demographics, admission data, treatment, and complications were reviewed. Results: There were a total of 46 patients with 65 vascular injuries, 39 arterial injuries and 26 venous injuries. The age range was 21 to 47 years. Nineteen patients had both arterial and venous injuries. A total of 42 cases presented within 12 hours of injury and complete arterial transections were found in 33 cases (80.49%). There were three mortalities (6.52%) and three amputations (8.33%). The overall limb salvage rate was 91.67% with popliteal artery being the commonest injured artery. Poor prognosticators for limb salvage were increasing time to present to the trauma centre, hypovolemic shock, multi-organ trauma and associated venous injuries. Conclusions: Penetrating missile trauma leading to vascular injuries has not been widely reported. Attempting limb salvage even in cases with delayed presentation should be weighed with the threat to life before revascularisation and should preferably be done at a centre with vascular expertise. A team approach with vascular, orthopaedic, general surgeons, and critical care anaesthesiologists all aboard improve the outcomes manifold. Use of tourniquets and early fasciotomies have been emphasized as is the use of native veins as the bypass conduit. This is probably the largest study on penetrating Vascular trauma in anti-terrorism ops from the Indian subcontinent. It highlights the significance of prompt recognition and availability of vascular expertise in optimally managing cases of vascular trauma.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.91-96
• /
• 2022

With the development of the cloud industry, various efforts are being made to improve resource efficiency and environmental continuity in software development and operation methods. However, in constructing a conventional structure of structural scheme, if the functionality is improved and added, it has a problem that the efficiency of full build arrangement is reduced for the changed source. In this paper, if a problem occurs in a solution service company, communication between the development department and the operation department can be facilitated and responded quickly, and the latest source updated during processing of the problem is the management system, provided is a system that can take advantage of CI tools and continuously integrate them. As communication through the proposed system is smooth, it is expected that unnecessary work can be reduced and the speed of development can be improved.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.272-277
• /
• 2024

In most countries, instrument flight procedures are designed by applying one of the following standards: the International Aviation Organization's DOC 8168, Air Navigation Services and Operation Procedures (PANS-OPS), or the US Federal Aviation Administration's TERPS, Terminal Procedures. In particular, the circling approach procedure has many differences between the two standards, and the US terminal procedure (TERPS) has become more complicated since 2013 by applying expanded standards depending on altitude. The circling approach procedures are more risky than straight-in approach procedures because it involves maneuvering the aircraft close to the ground at low energy for landing. In order to accurately understand these differences, this study provides to distinguish by what criteria the circling approach procedure is designed according to individual domestic airports in Korea, to calculate the radius for the range of circling approach areas that guarantee minimum obstacle avoidance during circling approach maneuvers, and to present methods for performing safe circling approach procedures.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.1
• /
• pp.27-37
• /
• 2002

The classification accuracy of land cover has been considered as one of the major issues to estimate pollution loads generated from diffuse landuse patterns in a watershed. This research aimed to assess the effects of the acquisition methods and sampling size of training reference data on the classification accuracy of land cover using an imagery acquired by optical sensor(OPS) on JERS-1. Two kinds of data acquisition methods were considered to prepare training data. The first was to assign a certain land cover type to a specific pixel based on the researchers subjective discriminating capacity about current land use and the second was attributed to an aerial photograph incorporated with digital maps with GIS. Three different sizes of samples, 0.3%, 0.5%, and 1.0% of all pixels, were applied to examine the consistency of the classified land cover with the training data of corresponding pixels. Maximum likelihood scheme was applied to classify the land use patterns of JERS-1 imagery. Classification run applying an aerial photograph achieved 18 % higher consistency with the training data than the run applying the researchers subjective discriminating capacity. Regarding the sample size, it was proposed that the size of training area should be selected at least over 1% of all of the pixels in the study area in order to obtain the accuracy with 95% for JERS-1 satellite imagery on a typical small-to-medium-size urbanized area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2020

Objectives: The purpose of this case study is to assess workers' exposure to carbon nanotubes(CNTs) and characterize particles aerosolized during the process of producing CNT-enabled polytetrafuoroethylene(PTFE) composites at a worksite in Korea. Methods: Personal breathing zone and area samples were collected for determining respirable concentrations of elemental carbon(EC) using NIOSH(National Institute for Occupational Safety and Health) Method 5040. Personal exposure to nano-sized particles was measured as the number concentration and mean diameter using personal ultrafine particle monitors. The number concentration by particle size was measured using optical particle sizers(OPS) and scanning mobility particle sizers(SMPS). Transmission electron microscopy (TEM) area samples were collected on TEM grids and analyzed to characterize the size, morphology, and chemistry of the particles. Results: Respirable EC concentrations ranged from 0.04 to 0.24 ㎍/㎥, which were below 23% of the exposure limit recommended by NIOSH and lower than background concentrations. Number concentrations by particle size measured using OPS and SMPS were not noticeably elevated during CNT-PTFE composite work. Instant increase of number concentrations of nano-sized particles was observed during manual sanding of CNT-PTFE composites. Both number concentrations and mean diameters did not show a statistically significant difference between workers handing CNT-added and not-added materials. TEM analyses revealed the emission of free-standing CNTs and CNT-PTFE aggregate particles from the powder supply task and composite particles embedded with CNTs from the computer numerical control(CNC) machining task with more than tens of micrometers in diameter. No free-standing CNT particles were observed from the CNC machining task. Conclusions: Significant worker exposure to respirable CNTs was not found, but the aerosolization of CNTs and CNT-embedded composite particles were observed during handing of CNT-PTFE powders and CNC machining of CNT-PTFE composites. Considering the limited knowledge on the toxicity of CNTs and CNT composite particles to date, it seems prudent to take a precautionary approach for the protection of workers' health.

• The Korean Journal of Pain
• /
• v.11 no.2
• /
• pp.247-252
• /
• 1998

Background: Tonsillectomy is one of the most common operation in children. Postoperative pain and its sequelae are universal complaints of the patients. The purpose of this study was to evaluate the effects of nalbuphine on the posttonsillectomy pain in children. Methods: Fifty-four pediatric patients undergoing tonsillectomy under general anesthesia were randomly allocated to one of the 3 groups 1) control group who received no analgesics, 2) received IV nalbuphine before induction of anesthesia and 3) received IV nalbuphine after both tonsillectomy. In postanesthetic recovery room, comfort level in all patients was assessed using the objective pain scale (OPS). Systolic blood pressure, diastolic blood pressure and heart rate were measured at just before and immediately after extubation and postanesthetic recovery room. Results: The pain scale score in group 2 was significantly lower than group 1, but no significantly different with group 3. There were no significant differences in blood pressure among three groups. The heart rate in group 2 and 3 was significantly lower than group 1 only at immediately after arriving recovery room. Conclusions: Administration of nalbuphine before induction is more effective on postoperative pain control after tonsillectomy in children.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.169-172
• /
• 2021

The article discusses the results of a quantitative analysis of open educational resources in the field of information technology. Study is based on a study of the content of ten platforms that provide access to open resources (OPs). To achieve this goal, we used the following methods: theoretical analysis and generalization of Internet sources to determine the popularity of educational platforms and resources on them; quantitative data analysis to determine the relative proportion of IT courses in various parameters: the relative weight of courses in the IT field in general and on each platform in particular, the language of instruction, the quantitative content by thematic areas. The following platforms providing access to open educational resources were subjected to quantitative analysis: Coursera, Edx, Udemy, MIT OpenCourseWare, OpenLearn, Intuit, Prometheus, UoPeople, Open Learning Initiative, Maidan Open University.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.10 no.2
• /
• pp.105-113
• /
• 2022

Purpose - An increase in automation has been as a result of digital technologies. The data will be instrumental in the determination of the services that are more necessary so that more resources can be allocated for them. The purpose of the current research is to investigate how big data utilization will help increase the profitability in the industry 4.0 era. Research design, Data, and methodology - The present research has conducted the comprehensive literature content analysis. Quantitative approaches allow respondents to decide, but qualitative methods allow them to offer more information. In the next step, respondents are given data collection equipment, and information is collected. Result - The According to qualitative literature analysis, there are five ways in which big data utilization will help increase the profitability in the industry 4.0 era. The five solutions are (1) Better Customer Insight, (2) Increased Market Intelligence, (3) Smarter Recommendations and Audience Targeting, (4) Data-driven innovation, (5) Improved Business Operations. Conclusion - Modern companies have been seeking a competitive advantage so that they can have the edge over other companies in the same industries providing the same services and products. Big data is that technology that businesses have always wanted for an extended period of time to revolutionize their operations, making their businesses more profitable.