• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.349-350
• /
• 2008

In the structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) /2,9-Dimethy 1-4,7-diphenyl-1,10-phenanthroline (BCP)/tris (8-hydroxyquinoline)aluminum$(Alq_3)$/Al device, we studied the efficiency improvement of organic light-emitting diodes due to thickness variation of BCP materials used for a electron breaking layer. The thickness of TPD and $Alq_3$ was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The TPD and $Alq_3$ layer were evaporated to be at a deposition rate of 2.0 A/s. The BCP was evaporated to be at a deposition of 1.0 A/s. When the thickness of BCP increased from 5 to 30 nm, we found that the luminous efficiency and the external quantum efficiency is superior to the others when the thickness of BCP is 20 nm. Compared to the ones from the devices made without BCP, the luminous efficiency and the external quantum efficiency was improved by 57 %, 70%, respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.433-452
• /
• 2014

Objective: The aim of this study is to give ergonomists the brief summary of the recently published ISO standards on human-system interaction and tips for application of the standards. Background: Standard developers did hard work on developing a standard in a concise manner. But most of standards are often bulky in volume. Readers of the standards are difficult to catch key points from the voluminous contents of standards and intermingle among them. Method: Focused on newly developed display/control technology, this study reviewed the 14 ISO standards on human-system interaction published during 2008-2013 and summarized key points from them. Results: Schematic diagrams and tables concisely illustrated the processes, procedures, dimensions, or best practices recommended by the standards concerning conception, design, and usability testing for consumer products. Conclusion: The standards provided the minimum level of requirements on design and evaluation on the physical input devices, electronic displays, and control interfaces based on the current state of technology. But the minimum requirements specified in the standards nowadays become mandatory ergonomic requirements in global trade world. Application: Ergonomists can take a quick and broad view on international standardization activities on newly developed display/control technology from this summary study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.391-396
• /
• 2013

Recently, microcavity is studied to reduce the optical loss of BLU and OLED. In this paper, we suggest applying microcavity to photo-luminescent lamp with plasma discharge technology to meet the display applications for a BLU for LCD. The structure of photo-luminescent lamp consists of SUS foil and ITO glass with microcavity. The opto-electric characteristics of photo-luminescent lamp with microcavity was evaluated. The brightness of photo-luminescent device was increased over $111cd/m^2$ with the adaptation of patterned microcavity at $30{\mu}m$. The 3D optical simulation verified the enhanced light outcoupling when microcavity applied to the device.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.187-192
• /
• 2013

Nozzle printing technology has been usually used for adhesive patterning to encapsulate electronic devices. Film formation of functional materials by nozzle printing is a great challenge. The characteristics of nozzle printing of organic ink were investigated systematically in this paper. TAPC as an organic emitting material was used as an ink for nozzle printing experiment to form the patterns in this study. Printed pattern width was increased as the ink flow rate and the printed substrate temperature were increased. The patterns showed a coffee-ring shape.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.99-99
• /
• 2010

Recently, amorphous transparent oxide semiconductors (TOS) have been widely studied for many optoelectronic devices such as AM-OLED (active-matrix organic light emitting diodes). The TOS TFTs using a-IGZO channel layers exhibit a high electron mobility, a smooth surface, a uniform deposition at a large area, a high optical transparency, a low-temperature fabrication. In spite of many advantages of the sputtering process such as better step coverage, good uniformity over large area, small shadow effect and good adhesion, there are not enough researches about characteristics of a-IGZO thin films. In this study, therefore, we focused on the electrical properties of a-IGZO thin films as a channel layer of TFTs. TFTs with the a-IGZO channel layers and Y2O3 gate insulators were fabricated. Source and drain layers were deposited using ITO target. TFTs were deposited on unheated non-alkali glass substrates ($5cm{\times}5cm$) with a sintered ceramic IGZO disc (3 inch $\varnothing$, 5mm t), Y2O3 disc (3 inch $\varnothing$, 5mm t) and ITO disc (3 inch $\varnothing$, 5mm t) as a target by magnetron sputtering method. The O2 gas was used as the reactive gas. Deposition was carried out under various sputtering conditions to investigate the effect of sputtering process on the characteristics of a-IGZO thin films. Correlation between sputtering factors and electronic properties of the film will be discussed in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.375-375
• /
• 2014

Layered semiconductor materials can be a promising candidate for large-area thin film transistors (TFTs) due to their relatively high mobility, low-power switching, mechanically flexibility, optically transparency, and amenability to a low-cost, large-area growth technique like thermal chemical vapor deposition (CVD). Unlike 2D graphene, series of transition metal dichalcogenides (TMDCs), $MX_2$ (M=Ta, Mo, W, X=S, Se, Te), have a finite bandgap (1~2 eV), which makes them highly attractive for electronics switching devices. Recently, 2D $MoS_2$ materials can be expected as next generation high-mobility thin-film transistors for OLED and LCD backplane. In this paper, we investigate in detail the electrical characteristics of 2D layered $MoS_2$ local bottom-gated transistor with the same device structure of the conventional thin film transistor, and expect the feasibility of display application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.93-93
• /
• 2011

The Indium Zinc Tin Oxide (IZTO) and Indium Tin Oxide (ITO) thin films are grown on PI substrate at different substrate temperature by pulsed DC magnetron sputtering with a sintered ceramic target of IZTO (In2O3 70 wt.%, ZnO 15 wt.%, SnO2 15 wt.%) and ITO (In2O3 90wt.%, SnO2 10wt.%). The structural, electrical, and optical properties are investigated. The IZTO thin films deposited at low temperature showed relatively low electrical resistivity compared to ITO thin films deposited at low temperature. As a result, we could prepare the IZTO thin films with the resistivity as low as $5.6{\times}10^{-4}({\Omega}{\cdot}m)$. Both of the films deposited on PI substrate showed an average transmittance over 80% in visible range (400.800nm). Overall, IZTO thin film is a promising candidate as an alternative TCO material to ITO in flexible and OLED devices.

• Journal of Information Display
• /
• v.8 no.2
• /
• pp.20-24
• /
• 2007

Efficient white organic light-emitting diodes are fabricated with the blue and red electroluminescent (EL) units electrically connected in a stacked tandem structure by using a transparent doped organic p/n junction. The blue and red EL units consist of the light-emitting layer of 1,4-bis(2,2-diphenyl vinyl)benzene (DPVBi) and 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1H,5H-benzo[i,j] quinolizin-8-yl)vinyl]-4H-pyran) (DCM2) doped tris(8-hydroxyquinoline) aluminum $(Alq_3)$, respectively. The organic p-n junction consists of ${\alpha}-NPD$ doped with $FeCl_3$ (15 % by weight ratio) and $Alq_3$ doped with Li (10 %). The EL spectra exhibit two peaks at 448 and 606 nm, resulting in white light-emission with the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.24). The tandem device shows the quantum efficiency of about 2.2 % at a luminance of 100 $cd/m^2$, higher than individual blue and red EL devices.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1389-1395
• /
• 2007

Two series of new organic fluorophores such as asymmetrical 3-(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 1 and symmetrical 3,7-bis(benzimidazol-2-yl)-10-hexylphenothiazine derivatives 2 have been synthesized. Electronic absorption, fluorescence, and electrochemistry measurements reveal that the electron withdrawing benzimidazole subunit directly connected to the phenothiazine core facilitates the charge transfer characters which were also verified by the theoretical calculations. Various substituents on the benzimidazole moieties can allow a fine-tuning of the LUMO energy levels of the molecules without significantly affecting the HOMO energy levels. The method provides a new route for designing ambipolar molecules whose energy levels are well-matched with the Fermi levels of the electrodes to facilitate the electron or hole injection/transfer in OLED devices.